2005 Jeep Liberty Renegade - I need to replace the front bumper, brackets, and a support piece just below the transmission cooler that the tow hooks mount to. I also have to replace the transmission cooler. Any help would be appreciated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
You'll need to support the vehicle on safety stands. Then take off the front wheels, Then take off the calipers that hold your brake pads. Then take off the bracket that the caliper is bolted too. Then remove the rotor. I suggest replacing the pads as well and be sure to clean the rust from where the pads rest on and make sure they slide easy back and forth, this will help in a longer life for the pads. Hope this helps and have an awesome day Wayne.
This year and model does not have a stand alone in-line filter, the filter is on the suction side of the fuel pump inside the fuel tank and under normal conditions is only replaced when the pump is replaced (comes with the new pump). This true of all late meodel Chyrsler Products.
is it the bulb or whole light assembly. Both are easy, the bulb has a slotted lock. turn the bulb to the left and it should come out. The assembly, under the front bumper, look at the light housing. There should be 2-4 small nuts mounting it to the surrounding body, once these are removed it will come out the backside.