Question about 2006 Mazda 5

Open Question

2006 mazda5 drivers door lock wont work

My 2006 mazda5 driver door lock will not work. the auto lock button on drivers interior door will lock all doors but the drivers. the kewy remote will lock all doors but the drivers. using the door lock button itseld will not lock the drivers door either. please help

Posted by on

5 Suggested Answers

  • 1 Answer

SOURCE: mAZDA mILLENIA 1997

Take some "electoclean" spray and hose down the key slot ( 4 bursts). Then spray the key and insert to work it around. My car did the same thing and it clears the beeping noise and allows the security system to engage.

Posted on Feb 22, 2009

stormbrewin
  • 426 Answers

SOURCE: 1992 Mazda MX-5 Door handle problem.

you will have to take the panel off to see why the inner lock/activator isnt working properly, besides youll have to take it off to fix it anyway.Maybe as simple as a bent handle to lock rod being bent and no longer long enough to activate lock correctly.youll just have to look and see.Let me know what you find

Posted on Oct 11, 2008

  • 84 Answers

SOURCE: door lock 2004 jetta wagen

One of 2 things. If all your latches work correctly meaning you open the doors and the little lights in the door panels light up, or the dome light lights when set to open door setting then it's not a micro switch in the latch. First try to reset the locks. Get in the car using the key to unlock the doors. From the passenger side lock and unlock your doors using the button on the opassenger door. Get out and the remote should now unlock all the doors with 2 presses.

Posted on Nov 08, 2008

  • 840 Answers

SOURCE: left front door auto lock-unlock only buzzes. How remove door?

thei are screws in the door hidden by caps that you need to take off the door and near the mirror shoud pop off

Posted on Jan 24, 2009

  • 840 Answers

SOURCE: 2003 mazda protege, power door locks.

yes you do the ones in question/ Please rate my response thank you very much

Posted on Jan 31, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

On my 2006 Chrysler 300/ the auto lock button on my key remote doesn't lock or unlock doors?


how do I reset one of two keys that the unlock,lock,trunck does't work but the key turns the engine over.

Oct 08, 2012 | 2006 Chrysler 300

1 Answer

Hi, my Audi A6 2006 won't lock the driver side door, when I press the lock button on my remote, even if I press the lock button once or twice!


Look at your MMI in there go to settings and check that your locking is to all doors in the MMI you can set what you like and what door to lock your Drivers door lock may be switched off just change it to on and it will work.

Mar 22, 2011 | 2006 Audi A6

1 Answer

2006 325 i door locks not working driver door will lock and other doors stay open if drivers door is locked it needs to be open manually back doors were locked by hand and now wont open by remote


I had a very similar situation. Was very annoying not being able to unlock or lock doors from pannel control nor from remote.
Only driver door can be opened with manual key.

Solution: One of the 15 amp purple fuses was blown. Fuses are located inside glove compartment, the interior end has to be removed releasing the two locks.
Use a light and the red tool located on the panel to remove fuses.

Oct 14, 2010 | 2006 BMW 3 Series

5 Answers

Mk4 Golf. Remote locking, windows and interior lights not working


Maybe fuse number 6 is blown (check lefthand side of steerning wheel where all teh fuses are located - you must open the door)

Jan 10, 2010 | 2003 Volkswagen Golf

2 Answers

Grand caravan sliding doors problems


the door track cable on the right side will have a broken wire in it,the drivers side will be the door control module inside the door

Aug 01, 2009 | 2006 Dodge Grand Caravan

1 Answer

Un work of the doors auto control lexus


1. sitting in driver seat, with driver's door OPEN, press lock/unlock button ON THE DRIVERS DOOR to lock all doors, then manually unlock driver door only.
2. Insert YOUR key in ignition, DO NOT TURN, then remove key.
3. Using the same lock/unlock button ON THE DRIVERS DOOR, slowly press lock-unlock in 5 cycles
4. Shut door.
5. Open door.
6. Using the same lock/unlock button ON THE DRIVERS DOOR, again slowly press lock-unlock in 5 cycles
7. With the door open insert your key into the ignition, turn to 'on' position (DON'T START), wait 5 seconds. Turn off and remove key.
8. Locks should cycle once (Car will lock and then unlock once by herself). If they don't cycle or they cycle more than once, do steps 1-7 over.
9. Now using the remote, push lock button, hold for one second, then release the button. The locks should cycle once. If not, start over and go slower.
10. Close the door.
11. Open the door.
12. Press the lock button on the remote. The locks should do a lock-unlock cycle.
13. Close the door
14. Press the lock button on the remote, the doors should lock.
15. Press unlock button and the doors should unlock.

Long beep to follow if successful.

Jun 16, 2009 | 1996 Lexus LS 400

Not finding what you are looking for?
2006 Mazda 5 Logo

Related Topics:

1,372 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mazda Experts

yadayada
yadayada

Level 3 Expert

69244 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22026 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6817 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...