Question about 2004 Pontiac Grand Prix

1 Answer

Oil display will not reset on the monitor

Recently I had the oil changed and when I tried to reset the oil life nothing happens, all other items on the screen will reset with no problem.

Posted by on

  • kmargrave Dec 29, 2008

    The fix that you sent does not apply the the 2004 grand prix, the oil reset is on a readout screen on the dash board.

    thks for trying anyway

  • Anonymous Mar 15, 2009

    Did you ever figure out how to reset? I have tried to reset both my washer fluid and tire pressure according to the owners manual but the warnings still appear.

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 15,935 Answers

Turn ignition to "ON", slowly press accelerator to the floor three times within five seconds, wait a few seconds and you will hear three tones, the "Change Oil" light will turn off. Turn the ignition to "OFF" and the light will be reset

Posted on Dec 26, 2008

  • blueextc3221
    blueextc3221 Dec 29, 2008

    Using the Driver Information Center (DIC)

    1.With the ignition key in RUN but the engine off, fully
    push and release the accelerator pedal slowly three
    times within five seconds.

    2.If the CHANGE OIL SOON light flashes, the system
    is resetting.

    3.Turn the key to OFF after the light stops flashing,
    then start the vehicle.


    If the CHANGE OIL SOON light comes back on, the
    engine oil life monitor has not reset. Repeat the
    procedure.

    Using the Trip Computer (If Equipped)

    1. Press the MODE button until the light appears lit

    2. Press and hold the RESET button for three seconds.
    next to OIL LIFE.

    The oil life percentage should change to 100%.

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Recently changed the oil for my 04 silverado, but the change engine oil warning will not go off, how do i correct this


After changing the oil and filter, reset the monitor by proceeding as follows:

Turn ignition On, but do not start engine.

Fully depress and release accelerator pedal three times within five seconds.

If CHANGE ENGINE OIL lamp flashes for five seconds, this indicates system has reset.

Start engine. OIL LIFE should change to 100%.

If CHANGE OIL SOON lamp lights again, repeat reset procedure.

2001-08 Silverado, w/Driver Information Center

Turn ignition On, but do not start engine.

Press MODE button until DIC (Driver Information Center) reads OIL LIFE LEFT/HOLD SET TO RESET.

Press and hold SET button until 100 percent is displayed. You will hear 3 chimes and CHANGE ENGINE OIL SOON message will go off.

Turn ignition Of


how to reset oil life on 2004 chevy silverado

Nov 10, 2016 | Cars & Trucks

Tip

Oldsmobile service light 1991-01


Alero

2000-01

Turn the ignition to the ON position, engine OFF. Press the RESET button and release. The CHANGE OIL indicator will start flashing
2000: Press and release the RESET button again.
1999: Press and hold the RESET button until an audible chime is heard and then release the button.


Intrigue


2000-01

Turn the ignition to ON without starting the engine. Fully press and release the accelerator pedal three times within five seconds. If the CHANGE OIL SOON indicator flashes two times, the system is resetting. Turn the key off after the the light has finished flashing, then start the vehicle. If the CHANGE OIL SOON indictor comes back on, the engine oil life monitor has not reset. Repeat the procedure again. If the vehicle is equipped with the U20 option code, the vehicle as an oil life low indicator. The oil life low indicator shows an estimate of the oil's remaining useful life. When the oil life index is less than 10 percent, the display will show OIL LIFE LOW. To reset the oil life monitor, press and hold the MODE button until the light appears next to OIL LIFE. Press and hold the trip RESET button until the oil life percentage changes to 99 percent.


Alero,
Intrigue,
Cutlass Supreme


1999,
1998,
1996-9

To reset the "CHANGE OIL" light, turn the ignition switch to the "RUN" position with the engine off. Fully depress and release the accelerator pedal three times in five seconds. The light will flash twice and go out.


Aurora


1995-99

To reset the "OIL LIFE" message, press the "ENG" button with the ignition on until "OIL LIFE PERCENTAGE" is shown. Press the "RESET" button for 5 seconds. "RESET" will appear and then "OIL LIFE" will show 100%


Eighty-Eight,
Ninety-Eight,
Regency


1994-97

When "CHANGE OIL NOW" is displayed, press the "RESET" button. Press "SEL" to display "OIL". Press "SEL" to display oil life. Press and hold "RESET" for 5 seconds. A "RESET" message should display with oil life changed to 100%.


Eighty-Eight,
Ninety-Eight


1992-93,
1991-93

Press and release the "TEST" button on the Driver Information Center. This will illuminate "CHANGE OIL NOW" if it is not already illuminated. Press and release the "OIL" or "OIL INDEX" button. Next, press the "RESET" button and hold for at least 7 seconds.


Toronado,
Trofeo

w/o CRT Display

1991

To reset "OIL LIFE INDEX", press the "2 OPTIONS" button: three times if the vehicle is equipped with a phone and compass, once if equipped with neither. While "OIL LIFE INDEX" is displayed, press and hold the "RESET/ENTER" key at the bottom right of the 15 button switch for 5 seconds.













on Dec 07, 2009 | Oldsmobile Alero Cars & Trucks

2 Answers

How to reset change oil soon light


Oil Life Monitor Resetting (KD, KE)
Description
The engine oil life monitor will indicate when to change the engine oil and the engine oil filter - usually between 5 000 km (3,000 miles) and 12 500 km (7,500 miles) since the last oil change. Under severe conditions, the CHANGE OIL message may be displayed before 5 000 km (3,000 miles). The vehicle must not be driven more than 12 500 km (7,500 miles) or 12 months without an oil change.
The engine oil life monitor will not detect dust in the oil. If the vehicle is driven in a dusty area, be sure to change the oil every 5 000 km (3,000 miles) or sooner if the CHANGE ENGINE OIL message is displayed.
Reset the oil life monitor when the oil has been changed.
Resetting Procedure
Press the INFORMATION SKIP button on the DIC control panel in order to display the OIL LIFE LEFT message.
Press and hold the RESET NO button until the display shows 100% ENGINE OIL LIFE.

Jan 29, 2016 | 1999 Cadillac DeVille

3 Answers

How do you reset the oil change required after oil change on a 2007 ford explorer sport trac limited?


Depending on your cluster its one of these...


Message Center Configuration
Oil Life Reset - Message Center Cluster

NOTE: The oil life calculation is set at a maximum of approximately 8,000 km (5,000 miles) or 180 days

  1. Press and release the SETUP button until the message center displays PRESS RESET TO BEGIN SYSTEM CHECK.
  2. Press and release the RESET button until the message center displays HOLD RESET IF NEW OIL.
  3. Press and hold the RESET button for 2 seconds and release to reset the oil life to 100%.
  4. The message center displays SETUP MENU HOLD RESET.
Oil Life Reset - Base Instrument Cluster

NOTE: The oil life calculation is set at a maximum of approximately 8,000 km (5,000 miles) or 180 days.

  1. Place the ignition in the RUN position with the engine off (KOEO).
  2. Press and release the TRIP/RESET button until SETUP MENU HOLD RESET is displayed.
  3. Press and hold the TRIP/RESET button until SYSTEM CHECK is displayed.
  4. Release the TRIP/RESET button.
  5. Press and release the TRIP/RESET button to scroll through the system check menu items until HOLD RESET IF NEW OIL is displayed.
  6. Press and hold the TRIP/RESET button until OIL LIFE SET TO 100% is displayed.
  7. Release the TRIP/RESET button. The oil life is now reset.
Oil Life Start Value - Message Center Cluster

NOTE: The oil life start value is used to reset the oil life value back to the maximum of approximately 8,000 km (5,000 miles) if the value was previously changed or to lower the value from the maximum (8,000 km
To reset the oil monitoring system to 100% after each oil change [approximately 5,000 miles (8,000 km) or 180 days] perform the following:
  1. Enter SYSTEM CHECK to display "OIL XXX% OIL LIFE OK".
  2. Press RESET control to display "HOLD RESET IF NEW OIL".
  3. Press and hold RESET control for more than 2 seconds. Oil life is set to 100% and "OIL CHANGE SET TO 100%" is displayed

Mar 06, 2011 | 2007 Ford Explorer Sport Trac

2 Answers

Oil change signal still on after oil changed


To reset the oil monitoring system to 100% after each oil change
[approximately 8 000 km (5 000 miles) or 180 days] perform the
following:
1. Press the SETUP control to
access the System Check function
2. Press and release the RESET
control to display “OIL LIFE XX%
HOLD RESET NEW”.
3. Press and hold the RESET
control for 2 seconds to display “IF
NEW OIL HOLD RESET”.
4. Press and hold the RESET
control to display “OIL LIFE SET
TO 100%”. Your oil life is now reset.

This procedure is on pages 69-70 of your owners manual, this is copied and pasted from that manual

Feb 18, 2010 | 2003 Ford Windstar

1 Answer

Who do you reset change oil soon light on a 2009 f350


To reset the oil monitoring system to 100% after each oil change
(approximately 7,500 miles [12,000 km] or six months) perform the
following:
1. Press and release the
SELECT/RESET button to display
“OIL LIFE XXX% HOLD RESET =
NEW”.
2. Press and hold the
SELECT/RESET button for two
seconds and release. Oil life is set to
100% and “OIL LIFE SET TO 100%”
is displayed.
Note: To change oil life 100% miles value from 7,500 miles (12,000 km)
or six months to another value, proceed to Step 3.
3. Once “OIL LIFE SET TO XXX%” is displayed, release and press the
SELECT/RESET button to change the oil life start value. Each release
and press will reduce the value by 10%.

Sep 30, 2009 | 2008 Ford F-350

1 Answer

How do you turn off the oil change message in the 2002 ford explorer after the oil has been changed?


FROM YOUR OWNERS MANUAL:
To reset the oil monitoring system to 100% after each oil change
[approximately 8,000 km (5,000 miles) or 180 days] perform the
following:
1. Press the SETUP control to
access the System Check function.
2. Press and release the RESET
control to display “OIL LIFE XX%
HOLD RESET NEW”.
3. Press and hold the RESET
control for 2 seconds to display “IF
NEW OIL HOLD RESET”.
4. Press and hold the RESET
control to display OIL LIFE SET TO
100%. Your oil life is now reset.
To reset the oil monitoring system to your personalized oil life %:
1. Press the SETUP control to
access the System Check function.
2. Press and release the RESET
control to display “OIL LIFE XX%
HOLD RESET NEW”.
3. Press and hold the RESET
control for 2 seconds to display “IF
NEW OIL HOLD RESET”.

Apr 15, 2009 | 2002 Ford Explorer

2 Answers

After an oil change the change oil light remains on


Press the setup button until "press reset at oil change" is displayed.
Then press and Release reset button until "hold reset to confirm" is displayed.
Now press and Hold reset button until "oil life set to 100%" is displayed.

Apr 13, 2009 | 2005 Ford Five Hundred

4 Answers

Reset oil life display after oil change?


THIS SHOULD BE IT.
How do I reset the Engine Oil life monitor and how does it work? TO reset To reset the Engine Oil Life monitor do the following:
Reset Oil life in NAV/DIC by (with car running) going to INFO>Oil Life>RESET
Press and HOLD until XXX turns to 100%
How does it work? The oil life monitor is a pretty sophisticated algorithm.

GM "The GM Oil Life System will automatically adjust the oil change interval based on engine characteristics, driving habits and the climate in which the vehicle is operated."

Feb 09, 2009 | 2007 Cadillac CTS 3.6L

3 Answers

How do I reset the "Oil Change Warning Indication" on colorado


if you have a owners manual read it. try coloradofans.com website and search the forums. i think johnny5846 is right if you don't have a DIC (driver info center). i believe you use the DIC(tripodometer). i don't know the sequence off hand, you can also you can change your lock settings and alarm settings, etc. with the DIC.

Jan 13, 2009 | 2006 Chevrolet Colorado

Not finding what you are looking for?
2004 Pontiac Grand Prix Logo

Related Topics:

211 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

yadayada
yadayada

Level 3 Expert

63661 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21990 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...