Question about 2001 Hyundai Sonata

1 Answer

2001 Hyundai Sonata V6 engine fails to warm-up - fans don't work

2001 Sonata V6 engine fails to reach operating temp - I noticed the cooling fans are not turning on after driving for a few miles - Is the temp sensor failed or fan sensor? Where are they located?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 333 Answers

The sensor is located at the radiator. follow the wire from the fan to the plug on the sensor. I hope this helps.

Posted on Dec 26, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 2001 chevy impala with a 3400 v 6. when the engine is cool the fans run but when the engine reaches operating temp the fans go off.


If the check engine light is not on, I would want to check the computer with a scanner to see what the temp sensor is telling the computer the coolant temp is. The problem could be in the computer or the fan relay.

Sep 05, 2012 | 2001 Chevrolet Impala

2 Answers

Where is the radiator cooling fan relay on a 2006 Sonata 3.3L?


The relay in engine compartment fuse box.
For its exact location and wiring diagram,click the link below:----Hyundai Sonata cooling fan not working http://schematicsdiagram.blogspot.in/2012/02/hyundai-sonata-cooling-fan-not-working.html
---------------This will help.Thanks.

Feb 26, 2012 | 2006 Hyundai Sonata

1 Answer

My car temp gauge showed over heating at highway speed. Then upper rad hose blew. Pulled over and had car towed home. I have a Matco tools code reader. Computer doesn't show any codes. Why would that...


Using your tatco code reader, select current data (real-time data) and select engine coolant temp sensor (ECT). Run engine to operating temperature (A/C off). Monitor the temp reading - when the temp reaches approx 204 deg farenheit, the fans should kick on, after the temp drops to approx 198 deg farenheit, the fans should turn off. The fans are controled by the ECM (Engine Control Module). The ECM controls the cooling fan relays.

Sep 06, 2011 | 2006 Hyundai Sonata

1 Answer

How to remove AIR MANIFOLD 2001 Sonata v6 REACH back 3 spark???


give these websites a try www.alldatadiy.com and www.autozone.com if all fails stop by your local library and get your hands on a Haynes auto repair manual for your car wish you the best of luck Michigan Man.

Jan 25, 2010 | Hyundai Sonata Cars & Trucks

1 Answer

Why is my heat/front defrost not working very well. Only shoots warm air? And not very forceful.


hi from uk can i offer this advice ? when you start engine let it warm up a little then drive untill temp guage reads warm at least ? then when you put front screen defrost on only select screen and No 2 speed then as temp reaches normal screen will clear fully if you select full speed on heat blower to clear screen at first start it will not work because the coolant from engine passing thro the heater matrix/radiator will be rapidly cooled by fan of heater TRY IT? in years gone by it was common remedy if you were stuck in traffic and temp rose towards hot you could cool system down by putting heater on full heat and the fan on max this cooled the engines coolant as it passed thro the heater ?hope you understand how heater/fan should work for optimum efficiency my wife has owned 2 of these accents and never had heat/demist problems it is surprising how many people consider the demist/heater systems are poor on many cars not just hyundai hope this helps best wishes

Dec 15, 2009 | 2001 Hyundai Accent

1 Answer

2006 hyundai sonata stopped fans


dear friend-i think you must first check the fans manually to see if they work,if they do then when you you reach working tempreture,feel the top and bottom radiator hoses they should be the same temp,if not the thermostat is at fault,if yes then ckeck the thermo-switch,

Sep 28, 2009 | 2006 Hyundai Accent

1 Answer

I have a 2005 V6 Sonata. The airconditioning


Replace the drive belt and make sure the belt tension is 'taut'

Jun 09, 2009 | 2005 Hyundai Sonata

1 Answer

2001 malibu 3.1 v6 cooling fans run all the time and temp gage


replace thermostat, this fixed my car, cooling fans keep coolant below temp guage parameters.

Jan 01, 2009 | 2001 Chevrolet Malibu

2 Answers

Temp gauge goes to hot then cools fairly fast is not consistent fans are working, does not feel like water running through system. Is it the thermostat or sensor or both ?


more than likely you need to replace the sensor. if you are not noticing a really warm to hot hose, then the sensor is bad.

Sep 22, 2008 | 1997 Hyundai Sonata

Not finding what you are looking for?
2001 Hyundai Sonata Logo

Related Topics:

466 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

70347 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6876 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...