- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
I would buy a fuel pump relay for that particular car. If that relay that you switched with the wiper relay isn't the same exact one then the fuel pump will not work properly. Make sure the right relay is in there. Could also be a clogged fuel filter.
most likely you have a bad crank sensor or fuel problem you need to check fuel pressure ,if you have enough pressure ,most likely you need crank position sensor,if you don`t have fuel pressure ,it might be your fuel pump relay or the pump, i would start with the relay first very unexpensive. you can also hear the pump if it`s working by cranking the engine and listening rear of the car for a humming sound . good luck
I would start by checking the basics which are checking for spark and fuel. If you have a gauge, check to see if you have fuel pressure when the key is turned on. If you have fuel pressure, check for spark. Chrysler products are known for the crank shaft sensor to go bad and cause a no start. Also, if driving for a certain period with the pedal depressed at the same speed, the throttle position sensor will stay at that position if stuck and will cause either and driveability problem or stalling. You may wanna look into replacing or at least checking that. Good luck.