Hello.
I have 4whell Ford Explorer 4.0 6V and door-alarm and engine imobiliser stoped working suddenly.It just happend and I am do not know what it migt caused.I have changed battery in key, checked the main battery too, have looked to fuses.Nothing wrong.Is it there some way to disconnect imobiliser...or anything helpful?
SOURCE: problem with ford explorer alarm imobiliser
You should have a switch under the dash and then just turn it to the off position. If you don't or it doesn't work (like mine) then, there is 2 fuses under the dash, put the key in the ignition and turn it forward, pull one of the fuses out and then start the car that should reset it. Then you should be able to put the fuse back. Sometimes if you put the fuse back before starting it the alarm will just continue to try and reset itself, but not start the car. If that doesn't work I have a mechanic who can pull the whole alarm out and when hes done it would look like nothing has ever been installed. Hes very good. I ended having him take my alarm out when I had the same incident happen after the 2nd time.
87 views
Usually answered in minutes!
×