An expert who has achieved level 3 by getting 1000 points
An expert that got 10 achievements.
An expert that got 5 achievements.
An expert whose answer got voted for 500 times.
Re: inatallation 92 honda accord power steering pump
Hey, here's the procedure, disable air bag, if equipped w/ one, disconnect the pump return hose from the reservoir and place the end in a large container. Plug the port in the reservoir. Start the engine and turn the steering wheel lock to lock several times, until fluid stops running from the hose. Turn off engine immediately. Re-attach hose. Disconnect the inlet and outlet hoses at the pump. Remove the drive belt. Remove the mounting bolts/nuts and remove pump. Install in reverse order. Adjust belt tension,fill ps reservoir and bleed any air from the system (to bleed air from system, fill reservoir, start engine and allow to idle, turn wheel from side to side all the way several times. Shut off, fill if necessary. . Tighten bolts to : Thru bolt 30 ft lbs., mounting nut 16 ft lbs.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
If your talking about removal and installation, Go to.
Register your vehicle, it's free. In the site search box, type in power steering pump. On the right side of page should be link for that info. Scroll down that page till you find your model and engine litre size. This info is for removal and installation of power steering pump.
You can also click on vehicle repair guides and get the same info, after you register the vehicle.
Here is a good link. Check out the video. Changing the pump is a pretty simple task, especially if you bought the pump with a new pulley. If you only have the pump you will need a pulley removal/installation tool. Check your belts to see if they need replacing because now would be a good time to do it since they have to come off to take off the power steering pump.
On you Honda Accord the main relay is located.
On left side of dash, under the Instrument Panel. Left side of the Steering Column.
To get axces You will need to Remove the Cruise Control Module. That is attached with 2, 10mm screws. one on the Steering column, the other one at the dash braket.
after you remove the cruise control module, you will see a Little Box Gray colour, Is a Relay more biger than a Regular Relay.
The NUMBER on the RELAY is : RZ0088.
OK.. I hope this help on your question.
Thank you for use fixya.