Question about 1989 Chevrolet Camaro

1 Answer

Location of egr valve on 2003 chevy silverado

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Chevrolet Master
  • 17,970 Answers

Hi there:
Here is a picture showing the EGR valve on the 4.8 Litre V8. The numbers below go with the picture. The arrow points to the front of the truck.

(1) Fuel Injector 2 Connector
(2) Throttle Actuator Control (TAC) Motor Connector
(3) Throttle Actuator Control (TAC) Motor
(4) Exhaust Gas Recirculation (EGR) Valve Connector
(5) Exhaust Gas Recirculation (EGR) Valve
(6) Fuel Injector 6
(7) Ignition Coil 2


location of egr valve on 2003 chevy silverado - 9_14_2012_3_34_36_am.jpg
Hope this helps; also keep in mind that your feedback is important and I`ll appreciate your time and consideration if you leave some testimonial comment about this answer.

Thank you for using FixYa, have a nice day.

Posted on Sep 14, 2012

Ad

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
  • 77 Answers

SOURCE: O.B.D. FUSE 2003 CHEVY 1500

Underhood fuse box (behind battery). may be labeled cigarette lighter or "aux pwr".

Posted on Apr 29, 2009

  • 6 Answers

SOURCE: location of block heater cord on my 2003 chevy silverado

MIne was on the passenger side inside the wire loom next to the shock. You can get to it through the fender well. It just looked like a ball of tape and only the plug itself was exposed with the rest of it doubled back on itself inside the loom. It was actually long enough to stick out of the front of the truck.

Posted on Jan 18, 2009

  • 5 Answers

SOURCE: Where is the egr valve located on a 2003 chevy 4.3

The EGR Valve is located on the front of the Engine under the frest air tube. It is at a 45' angle. When checking look for lodged carbon chunks. I recommend using a gesket with a screen built in. It is located infront of the Thermostat housing.

Posted on Mar 14, 2010

  • 1 Answer

SOURCE: location of coolant temp sensor on 2003 chevy

Its on the driver side head. Theres a plug and sensor on the head.

Posted on Mar 28, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Why is my 2003 Chevy Silverado bogging down when I press the gas


Fuel filter first . Possible plugged coonverter

Jul 07, 2016 | Cars & Trucks

1 Answer

How to replace exhaust gas recirculation valve


Betty, Check the attached EGR links,instruction and guides, Good luck
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."
Exhaust Gas Recirculation Valve EGR Checking
Faulty EGR Valve Symptoms and EGR Valve Cleaning
EGR Valve Replacement Chevy Venture 3 4L Engine
Installing New EGR Valve


Mar 08, 2016 | 2003 Pontiac Aztek

1 Answer

2002 chevy 5.3, silverado egr valve. WHERE IS IT


It is on passanger side of engine, in front of the oil filler tube. Round looking thing, five wire connector plugged in !

Dec 15, 2014 | 2002 Chevrolet Silverado

1 Answer

Egr valve location for a 2005 chevy silverado 4.3 litre v6


Hi Jim, The Exhaust Gas Recycle valve is usually mounted on a tappet cover and is connected to the the intake manifold. It has the function of recycling the fumes from the sump and burning them in the combustion chamber. Regards John

Dec 29, 2013 | 2005 Chevrolet Silverado 1500 2WD

1 Answer

Egr valve chevy


Check your ground wires. Could be a hot spot on the wiring harness as well.

Jul 10, 2013 | Cars & Trucks

1 Answer

Location ofegrvalve on 2003 chevy silverado 4.8


Hi there:
Here is a picture showing the EGR valve on the 4.8 Litre V8. The numbers below go with the picture. The arrow points to the front of the truck.

(1) Fuel Injector 2 Connector
(2) Throttle Actuator Control (TAC) Motor Connector
(3) Throttle Actuator Control (TAC) Motor
(4) Exhaust Gas Recirculation (EGR) Valve Connector
(5) Exhaust Gas Recirculation (EGR) Valve
(6) Fuel Injector 6
(7) Ignition Coil 2


9_14_2012_3_34_36_am.jpg
Hope this helps; also keep in mind that your feedback is important and I`ll appreciate your time and consideration if you leave some testimonial comment about this answer.

Thank you for using FixYa, have a nice day.

Sep 14, 2012 | Cars & Trucks

1 Answer

Where is the egr valve located on a 2003 chevy 4.3 astro van? I think it not funtioning properly


The EGR Valve is located on the front of the Engine under the frest air tube. It is at a 45' angle. When checking look for lodged carbon chunks. I recommend using a gesket with a screen built in. It is located infront of the Thermostat housing.

Mar 08, 2010 | 2003 Chevrolet Astro

1 Answer

I have a 2000 Chevy Silverado 4.8 v8 engine and I'm trying to locate the EGR valve. Thanks


The EGR valve is on the passenger side of the engine if you are looking at the front of the motor. There is a hose that goes into the intake behind the throttle body and another hose that goes into the exhaust manifold. It is the unit that has an electrical connector going into it.

Oct 31, 2009 | 2000 Chevrolet Silverado 1500

2 Answers

Need to know where the egr valve is located on a 2000 chevy silverado 1500 5.3 liter engine


. The EGR valve is located in front of the oil filler neck. All you need to do is remove the electrical wire from the top of the valve, there is a clip on the connector so don't try and pull it off without lifting the clip. Once the wire has been disconnected, just unbolt the two bolts holding the EGR valve on. Thats it.

Aug 16, 2009 | 2000 Chevrolet Silverado

Not finding what you are looking for?
Cars & Trucks Logo

2,066 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

Marvin
Marvin

Level 3 Expert

84027 Answers

Jonah Oneal

Level 3 Expert

14065 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22483 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...