P1300 code 1998 4runner - 4Runner Toyota Cars & Trucks

see link


https://www.youtube.com/watch?v=1QnZQPc8Wwc

Ok for code p1300 replace ignition coil 1 and 4 cilynder and for p1310 replace ignition coil 2 and 3 cilynder

the code p1300 is BOOST CALIBRATION FAULT

Error Code: P0301
Description:
Cylinder 1 - Misfire Detected
Possible Cause:
Wiring.
Ignition system.
Fuel injectors.
Fuel pressure.
Running out of fuel.
EVAP canister purge valve.
Evaporative emission system.
Low compression.
Base engine problems.
Engine control module (ECM).

Error Code: P0302
Description:
Cylinder 2 - Misfire Detected
Possible Cause:
Wiring.
Ignition system.
Fuel injectors.
Fuel pressure.
Running out of fuel.
EVAP canister purge valve.
Evaporative emission system.
Low compression.
Base engine problems.
Engine control module (ECM).

Error Code: P1300
Description: Random Misfire
Possible Cause:
As above.

Error Code P1300/ 14. Igniter signal malfunction No.1
Problem Areas:
IGNITION SIGNAL--NO "IGF" SIGNAL TO ECU
--IGNITER/IGNITER CIRCUIT
--IGNITER AND IGNITION COIL/CIRCUIT
--IGNITION AMPLIFIER/ DISTRIBUTOR.
--ECU

Use google & type


OBD2 Code P1300 2000 Saab

my Mazda demio 2003 doesn't start it shows error codes p1300 undefined trouble code and p3302 boost calibration fault what does it mean need answers please

Go to this site: http://www.engine-light-help.com/generic-check-engine-light-codes.html

Your 'generic' codes are there for OBD-II

P1300 code is for a faulty ignighter circuit no 1 cylinder

CODE P1203 CYLINDER NUMBER 3 MISFIRE CODE P1300 RANDOM MISFIRE DETECTED. POSSIBLE CAUSE BAD SPARK PLUGS OR FAULTY WIRES.CHANGE FUEL FILTER CLEAN FUEL INJECTORS. MORE THAN 1 CYLINDER MISFIRE COULD BE LEAN FUEL MISFIRE.