Question about 2001 Dodge Dakota

1 Answer

Window wont roll up

Window just fell down and wont roll back up. took door panel off and i cant figure it out. the motor seems to be workink, but the cable seems to be off track. how do i put it back on track?

Posted by on

  • Anonymous Dec 29, 2008

    it's not necessarily the cable. the same thing happened to mine but it's the small plastic piece that the cable runs on. it's a rounded piece. i don't know where it belongs and i can't find a picture of the actual assembly. the cable on mine is not broken.

  • Anonymous Dec 29, 2008

    the problem is not always the cable. i hae the same problem and the cable is not broken. it's the small plastic rounded piece the cable rides on

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Dodge Master
  • 751 Answers

Hi my name is Allen!

When the window falls down it is because the cable for the regulator and motor broke. The only fix is a new regulator/motor assembly from the dealership, or a good one from the junk yard if you can find one.

For further asistance you may reach me at FixYa!

Posted on Dec 28, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The drivers side window fell into the door of 96 rendezvous. How do i put it back on track?


The door trim is held on with a combination of screws and push clips Once you have the trim off you will probably find that the window motor regulator is defective. I would recommend replacing the regulator and motor as an assembly.

Are you sure of the year? Didn't think that they made a 1996 Buck rendezvous

.http://www.dormanproducts.com/gsearch.aspx?

Feb 23, 2015 | Cars & Trucks

1 Answer

Back window fell halfway down will not go back up. it will roll down, but only goes up halfway.


Sounds like it fell off the track.Remove door panel and speaker to get a good look inside door. There is a motor and a cable that moves the window up and down on the regulator. you could plug the switch in and watch it work . It could be the regulator and most are held in by rivets just drill them out and use nuts and bolts

Nov 01, 2011 | 2005 Chrysler Pacifica

1 Answer

Driver window off track,went to roll window down and window fell inside of door.Window crank turns freely.


remove door panel, If you are mechanically inclined you can figure out how to connect the regulator (operating assembly) back to the window by removing mounting bolts of assembly and pivoting. Something came loose or broke, window guides are worn (plastic parts), or assembly is way out of alignment for window to fall off track....

Sep 16, 2010 | 1993 Plymouth Acclaim

1 Answer

I cant seem to get my window to roll down, the motor is working perfectly but the window just dont want to roll down? what should i do?


sounds like the either the spline on the motor has worn or the window track has detached from the window. Remove the interior door panel just enough to see inside the door & try rolling it down you should be able to see what the motor is doing from there should be an easy fix. If its a worn spline you may have to replace the motor

Mar 12, 2010 | 1995 Hyundai Sonata

1 Answer

I have a 2001 Pontiac grand prix. My rear drivers side window wont roll up or down, When i took door panel off, i noticed a blue and red wire that has a gray plug, That seems to me should go somewhere,...


it should go to the window motor or the power locks or the power window button.
check window motor with a test light for 12 volts at the plug.
check regulator/pulley system for a broke cable.

Oct 23, 2009 | 2001 Pontiac Grand Prix

2 Answers

Window fell into the door


These cars have a window regulator that is made with a cable and a plastic wheel that the cable rolls around. Once it wears out you need to replace the whole regulator, it comes with new motor. Look on ebay, cheapest way to buy a new one. You can take off door panel and push window back up and wedge or vise grip so it wont fall back down.

Aug 28, 2009 | 2001 Kia Spectra

1 Answer

Non working driver side power window 2003 Nissan Sentra


I had a similar problem, window fell down one day while driving. Screw was loose at bottom of window that connects to track. Was hard but fixed it and worked great after. Hope it helps u out.

Aug 08, 2009 | 2003 Nissan Sentra

1 Answer

Window fell into door, will not roll up. Cable


Replacing the window regulator assembly, there is no fix for the cable.

Jul 08, 2009 | 2004 Ford F150

Not finding what you are looking for?
2001 Dodge Dakota Logo

532 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

70347 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6876 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...