Question about 1993 Mitsubishi Mighty Max

2 Answers

Hard to get out of third gear and have lost fourth

Recon gearbox fitted 12mths ago to my 1993 mitsi l300 van,this has a 4d56 non turbo with 5spd box,after making reasonably heavy trailer load of steel I seem to have lost fourth ,just makes noise like it no in gear if I try to drive in fourth ,goes into third ok but difficult to get out of third,all other gears are fine,I think it is the clutch release bearing,does this sound like the problem??

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

4wd not disengaging what is the problem

Posted on Jul 12, 2011

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 10 Answers

Your three-four synchro or you need a new clutch, hope it's the clutch, the synchro will cost alot

Posted on Dec 25, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Head torque specification for l200 4d56 DID DOHC 2007


what car? and year>? and country , so we can look it up in our
great online sources. (all 3 must be known)
in the USA we use alldata.com (or the dealer FSM)

i guess you dont know that some heads are not torqued, or use TTY bolts, right? some are set by ANGLE degree.
that is covered in the FSM all that. the facts.
most head failures result from guessing.
or asking here, with no facts on car.
some engine run different heads, and different if turbo.

case in point, all this Mitsubishi engines

my guess
Mitsubishi Triton

Oct 24, 2014 | Cars & Trucks

1 Answer

I have a 3.1 diesel turbo bighorn and ive giving it o trans service flush filter etc. gear changing is still a little rough and have to apply heavy acceleration for it to change gears when im sitting...


rip it out and fit a manual gearbox is the best bet as i do feel that this gearbox has done its life and it needs a overhaul ,like front clutch relign and new brake bands

Aug 01, 2011 | 1993 Isuzu Trooper

1 Answer

My car is a manual transmission. But when i use the 4th gear, it automatically comes to nutral gear, whats the problem?


if its jumping out of fourth back into nuetral then you have 2 options,both involve taking out the gearbox.
1/replace the baulk ring on fourth gear or
2/ get a recon box(poss the easiest,as all rings/bearings will have been replaced).

May 04, 2010 | 1991 Toyota Corolla

1 Answer

Went in reverse heard a loud noise and the van quit moving now its stuck in gear?


recon gearbox needed ,or rip it out and fit a proper gearbox,,,, a MANUAL ONE .

Jan 18, 2010 | 1996 Dodge Caravan

1 Answer

1997 Chevy P-32 step van (panel van, delivery van) with 4L80-E transmission: Truck drives and shifts properly in gears one through three, but slips as soon as it shifts into fourth. It will not pull at all...


the fourth clutch is burnt probably due to a bad 4th clutch piston seal... if you can get a good trans that cheap then you should just put one in it unless you are familiar with internal trans repairs...

Oct 13, 2009 | 1997 Chevrolet K1500

1 Answer

When i shift into third the gears grind.. why?


sounds like the syncromesh has gone in the gearbox. If you dont want them to grind, you,ll have to double declutch. I f you cant do this, get a new gearbox.

Jun 09, 2009 | 2001 Hyundai Accent

1 Answer

Cannot get 1991 300 zx (manuel) non-turbo to shift in 1st and third gear


Most likely it is worn synchros. Try changing out the transmission fluid and run Redline MT90 in it instead. The fourth gear synchros were a known weak spot on the Z32 cars, but other gears could also develop trouble. MT90 is known to alleviate a lot of shifting problems related to synchros in the Z, so it's worth a shot.

Sep 16, 2008 | Nissan 300ZX Cars & Trucks

2 Answers

Glow plug timer


check the temp sensor or low resistance in the glow plugs first

Jul 10, 2008 | Mitsubishi Minivan Cars & Trucks

Not finding what you are looking for?
1993 Mitsubishi Mighty Max Logo

Related Topics:

244 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts

yadayada
yadayada

Level 3 Expert

63291 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21981 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...