Question about 2004 Jeep Grand Cherokee

1 Answer

What to torque head bolts on in 04 jeep grand cherokee 4.0 6cyl.

I need to know what to torque headbolts on in 04 jeep grand cherokee 4.0 6cyl.

Posted by on

  • 2 more comments 
  • Anonymous Mar 13, 2014

    show electrical part my 04 grand cherokee brakelight bulb fits into

  • Anonymous Mar 14, 2014

    what is the torque or psi on heah bolts

  • Anonymous Mar 14, 2014

    head bolts torque spects for 1988 jeep cherokee 4.0 eng

  • Anonymous Mar 30, 2014

    Require cylinder head bolt torque settings

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 512 Answers

The 4th bolt back from the front on pasenger side is the #1 head bolt, tighten in a clockwise rotation. it is a 4 step process.torque all bolts to 22 ft lbs...step 2 torque all to 45 ft lbs...step 3 retorque all to 45 ft lbs...4th step torque bolts 1 through 10 to 110 ft lbs... bolt 11 to 100ft lbs then bolts 12 thru 14 at 110 ft lbs

Posted on Dec 26, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1999 Jeep Grand cherokee Limited, 5.9 liter torque setting for head bolts


posted the fsm
5.9L, 1999 WJ?
check alldata.com.... it covers this engine,
buy my WJ, fsm skips the 5.9L, not sure why.
ah only the limited has that. engine.
my online links show no 5.9L. so see why you are asking here.
why not go to real jeep forum and ask.

here are the (what else) questions
are they TTY?
are the reusable.?
are the angle set.?
what is the pattern ? Sequence.
and staging levels .? (about 1./3 steps is ok)
those are always a question. and the FSM answers them all.
for your car.

if the expensive WJ (limited) FSM is too pricey, (it is)
then ask here.
http://www.jeepforum.com/forum/f310/

one search, you can too, or better ask them.

http://www.jeepforum.com/forum/f13/5-9-limited-top-end-rebuild-1309601/


the intake is TTY bolts.
not head, heads are 2 times, bolts. lol.

im not sure what book covers the 5.9L, it might be a supplement.
ask jeep for best advice, there.
http://www.ebay.com/itm/1999-Jeep-Grand-Cherokee-Factory-Shop-Service-Manual-/281798487608?hash=item419c7fae38&vxp=mtr

Sep 16, 2015 | Jeep Cars & Trucks

1 Answer

How do i know if the cylinder head bolts on my 1990 plymouth colt are torque to yield


They are torque to yield if they require a final extra degree turn (like 90, or 45 degrees) in the headbolt tightening torque values listed in the repair manual.

Nov 19, 2011 | Cars & Trucks

1 Answer

Need head bolts tourqe sequence for a 89 tercel


1989 L4 headbolt sequence:
Cylinder Head Bolt Torque Sequence809142031993 L4 headbolt sequence:
Cylinder Head Bolt Torque Sequence80914199they appear to be the same,other than the torque angle. good luck!

Oct 20, 2011 | 1993 Toyota Tercel

1 Answer

Hi .i would like to know what the headbolt and tappet settings are for 2.5 cherokee jeep preg. many thanks al


head bolts are 110 lbs except 8 which is 100(right front) front to back #s are, Right side: 8,4,1,5,9...left row:7,3,2,6,10. Tighten in steps, 1/3 of final value at each step.
Rocker bolts are 19lbs.

Dec 22, 2009 | 1996 Jeep Grand Cherokee

2 Answers

I need to know the torque settings on the head for a 94 jeep grand cherokee laredo


Assuming the motor is an inline six
1.Middle bolt is number 1.Clockwise torque to 22 f/lb
2.Same pattern to 45 f/lb
3. same pattern to 100 f/lb
Be sure to use loctite 592 to the threads and some head gasket sealer to both sides of the head gasket.
Hope this helps

Oct 18, 2009 | 1994 Jeep Grand Cherokee

2 Answers

What is the tension on cylinder head bolts for a jeep grand cherokee 307935 4 litre, 6 cylinder, 1999, petrol motor.


Coat threads of left hand front bolt with sealant: 1st - step; - 22 ft./lbs. 2nd - step; - 45 ft./lbs. 3rd - step, all bolts except L.H. front bolt; - 110 ft./lbs. 4th - step, L.H. front bolt; - 100 ft./lbs. fig100.png

Sep 05, 2009 | 1999 Jeep Grand Cherokee

1 Answer

Replacing head


There should be 10 headbolts. This vehicle uses torque to yield headbolts and should be replaced with the new gasket. Bolts 1-8 get torqued to 40 ft lbs initially, bolts 9 and 10 get torqued to 30 ft lbs initially, Then all bolts get turned an additional 90 degrees. I would strongly suggest borrowing a torque angle gauge for doing this or you might be doing the same repair next week.

Feb 12, 2009 | 1999 Chevrolet Malibu

1 Answer

Head Bolt Torque for a 2000 Grand Cherokee Laredo 4.0L


the torque is a 4 step process

1 torque all bolts to 22 ft/lbs
2 torque all bolts to 45 ft/lbs
3 recheck all bolts to 45 ft/lbs
4 torque bolts 1 thru 10 to 110 ft/lbs
bolt 11 to 100 ft/lbs
bolts 12 thru 14 to 110 ft/lbs
bolt #1 is the fourth bolt from the front on the passenger side....#2 is the fourth bolt on the drivers side then you continue in a clockwise order

Jan 04, 2009 | 2004 Jeep Grand Cherokee

1 Answer

1991 jeep cherokee sport 4.0


 For your 1991 Jeep Cherokee 2WD 4.0L MFI :
  Foot pounds (Final torque) 

  Note:
  Torque sequence ------------------  
  front    | 12  8   4   1   5   9  13 | 
  of | | 
  engine | 11  7   3   2   6   10 14 | 
  ------------------  
Final torque must be reached in 3 equal steps  
  Step 1: torque all bolts (except bolt 11)  
  to 110 Ft/Lbs  
  Step 2: torque bolt 11 to 100 Ft/Lbs  
Recheck final torque in sequence  

Sep 30, 2008 | 1991 Jeep Cherokee Briarwood

Not finding what you are looking for?
2004 Jeep Grand Cherokee Logo

389 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

70346 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6864 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...