Car starts and stops, if i keep the key at turned on possition,
Honda odyssey 1996 starts and then stops in few sec.
if the keep the key rotated all the way it runs... ( in normal conditions, it will make rattle noice, to remind us the engine is running)
for the last 2 weeks, it starts and then stops, after 3 or 4 attempt it starts and runs. I added Fuel injection cleaner, it ran 3 to 4 days, then started again.( more 1/4 tank gas is left with the added Fuel injection fluid)
Pls. let me know what could be the cause ...
Re: car starts and stops, if i keep the key at turned on...
Hello, honda has a problem with the key switch shorting out. mostly becuase there is to much weight on the key ring. the electrical part of the switch looses contact in run mode. replace the ingtion switch electrical part. this should solve the problem
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
PUT THE RIGHT KEY IN THE IGNITION SWITCH TURN IGNITION SWITCH TO ON POSITION UNTIL IMMOBILIZER WARNING LAMP ILLUMINATES FOR FEW SECONDS.KEY HAS RESET.IF IMMOBILIZER WARNING LAMP FLASHES RAPIDLY KEY DID NOT RESET.TRY TURN SWITCH ON WITH KEY UNTIL IMMOBILIZER LIGHT ILLUMINATES FEW SECONDS TURN OFF YOU READY TO GO GO GO.IF CANT RESET HONDA DEALERSHIP HAS TO USE DIAGNOSTIC EQUIPMENT TO RESET KEYS TO IMMOBILIZER MODULE.
that green key is the immobilizer system indicator. It comes on for a few seconds when you turn the key to ON. It will then go off if you have inserted a properly coded key. If the key isn't coded properly, the green key indicator will flash and the engine won't start. The indicator also blinks several times when you turn the key from ON to Acc or Lock. This is normal. (From owner's manual under "Indicator Lights")
If you are absolutely sure that the all the abs sensors are good. Then the only other factors are the abs unit itself and the abs computer. Please have the system checked with a a scanner to make sure. Remember the only way to an ABS light will reset is by driving the vehicle and if every component of the system is fine the light will go out. Because your light is on there is a problem in the system and your abs is not functioning when the light is ON .Good Luck