All the plugs and swicths went out in the master bedroom. the only thing that works is the cieling light.
SOURCE: Need wiring diagram '70 Chevy 2T trck w/electronic ignition conv
Make sure you give it a good tune up. Make sure that your rotor is moving when you crank it over. If it is moving then you will need to replace the distributor module.
SOURCE: power windows on passenger side have no power at switches
replace the switch assembly, mine dont work either unless i push forward/back and down at the same time... and the temp outside they all need to be replaced.. :( 1 thing that might help is to make sure that all switches are centered and not stuck and make sure that the window lock isnt on, then try to figure out how to get the switch to activate on the window u want
SOURCE: i need the wiring oder for spark plugs for a 1970
According to my Chilton book this is same for either engine. The firing order is 1-5-6-3-4-2-7-8. Standing at the front of the car looking at the engine #1 piston is at 9 o'clock on the distributor and it turns clockwise. The hold down screws for the cap should be at 12 and 6 o'clock nd the window to set dwell should be at 9. The odd number pistons are on the passenger side starting from the rad and the even numbers on the driver's side from the rad. Hope this helps.
SOURCE: wiring diagram 1965 chevelle el camino tail iights
Those are the right wires, so the switch must be broken. Do you need instructions for replacing it?
SOURCE: where can i find a1991 redman mobile home wire diagram for singular 14x80 mobile home
Duplicate question.
350 views
Usually answered in minutes!
×