Question about 2000 Toyota Camry

1 Answer

Vvt-i pros and cons in 2.4lts. toyota cars

Before buying a car with these especs I want to know the performance of that engine

Posted by on

  • victorio_pad Dec 26, 2008

    Thankyou very much it was a clear and helpfull opinion and I'll say a i-answer .....

    regards, victorio

  • Anonymous Mar 27, 2014

    vvt sensor camshaft sensor



1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 20 achievements.


    An expert that got 10 achievements.


    An expert that got 5 achievements.

  • Toyota Master
  • 1,861 Answers

The VVT-i will outperform a car without it. ANY car with variable valve timing is a PLUS. Under hard acceleration, the duration of the valve opening timing changes, this results in a bit more power. Then, at idle.easy acceleratin, they change again. They continously change, depending on your "Learns", your driving...that is the " i " part in VVT-i.
Varible Valve TIming (with) intelligence". It's a good thing.

A FixYa rating would be most appreciated.

Posted on Dec 26, 2008

  • Toyota Ed Dec 26, 2008

    Thanks for the FIxYa!

    Thnaks for choosing FixYa to assist you!



1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Where is the timing marks of toyota 2.7 vvti engine

Timing marks are always in the same place regardless or make. Engine timing marks are a notch on the crankshaft pulley with marks on a casting or metal plate next to the crankshaft pulley.

Camshaft marks are on one (single cam) or both (twin cam) cylinder head pulleys with a fixed mark on top of or central to the pulleys.

These videos may help you.

How to assemble engine VVT-i Toyota Part 30: Timing chain ...

? 36:20
Apr 26, 2014 - Uploaded by Peter Finn
How to assemble engine VVT-i Toyota Part 30: Timing chain setup ..... Would the 2.7 VVT-i Toyota engine ...

How to check timing chain status VVT-i engine Toyota ...

? 1:03:59
Oct 12, 2013 - Uploaded by Peter Finn
How to check timing chain status VVT-i engine Toyota Corolla. Gasoline engine. Years 2000 to 2008. Also ...

Feb 14, 2016 | Toyota Cars & Trucks

1 Answer

How do I fix trouble code p1354 on a 2000 Toyota avalon?

P1354 Toyota Description
Variable Valve Timing (VVT) system controls the intake valve timing to proper timing in response to driving condition. The Engine Control Module (ECM) controls Oil Control Valve (OCV) to make the intake valve timing properly, and, oil pressure controlled with OCV is supplied to the VVT controller, and then, VVT controller changes relative position between the camshaft and the crankshaft.

Read more:

Dec 07, 2014 | Toyota Cars & Trucks

2 Answers

P0022 for 2004 toyota sienna van

P0022 Toyota - Camshaft Position \'A\' Timing Over-Retarded Bank 2

Possible causes

- Dirty Oil

- Faulty variable valve timing (VVT)

- Faulty oil control valve (OCV)

- Variable Valve Timing (VVT) harness is open or shorted

- Oil Control Valve (OCV) circuit is open or shorted

- Damaged Engine Control Module (ECM)

Tech notes

If the engine oil is clean and the VVT and OCV circuits are OK, replaced the VVT to resolve the problem.

When is the code detected?

After the ECM sends the target duty cycle signal to the OCV, the ECM monitors the OCV current to establish an actual duty cycle. The ECM determines the existence of a malfunction and sets the DTC when the actual duty cycle ratio varies from the target duty cycle ratio.

Possible symptoms

- Engine Light ON (or Service Engine Soon Warning Light)

- Lack/Loss of power

- Engine rough idle

P0022 Toyota Description

The Engine Control Module (ECM) controls the Oil Control Valve (OCV) to regulate the intake camshaft angle. As a result of the angle change, the engine timing is advance or retard. Optimizing engine timing will help the engine improve torque and fuel economy, and the exhaust emissions decrease under overall driving conditions. The Variable Valve Timing (VVT) system includes the Oil Control Valve (OCV) and VVT controller. The ECM detects the actual intake valve timing using signals from the camshaft and crankshaft position sensors, and performs feedback control.



Aug 14, 2014 | Cars & Trucks

1 Answer

Jumped time

A blast from the past (fav. movie)
i love caps, snaps me back to my first home computer (Northstar z80)
and my silly ASR33, printing terminal, caps only, flash ! im there....
misfires on all 6 cylinders. if patient,.
what car? what engine? what year?
1150 AFR bad.
1346 VVT says, cam is bouncing like MAD (DEVIATIONS) bank1
1349 VVT frozen, means it can change it ,but how could it if it bounces. bank 1
1351 VVT Sensor Range/Performance Problem (Bank 2)

here is my guess , your engine is????
2.5,3.0,3.3,3.4,4.0lilter engines,

new belt ,why old one snapped or shredded? or worse slipped?
my guess, bad belt setup, not timed right. or bad tensioner. bad idlers, or
or bad VVT parts, or bent head valves.

the V6 may be interference, and TOY dont say, but Gates lists most 96 and newer as Interference...engines.
i will assume it is (this is 1st deal with me, as im ,FIRST do no HARM"
and these engines , what do i do?
i do a leakdown test, just after the belt is replaced and tensioned, turning engine by hand.
if the leak down test FAILS the belt snapped and the valves did hit.
this i do everytime, it takes me, what 30 more minutes?
this act prevents further damage to head and pistons and rod bearing.
the damage can cascade fast to needing a new engine. now..
IMO, good luck.

Jan 02, 2014 | Toyota Cars & Trucks

1 Answer


year, ?
english. we need that.
here i googled it for you
Toyota sells this
or online , see , its all there. log in?
ive not the foggiest notion how to get a spanish FSM. (mexico? Toyota)
when posting about cars the first thing is
1: year.?
2: what country was sold.? mexico , spain, Phillipines. ,etc.
3: what engine (you did that but displacements vary on V6 for some years)

Dec 04, 2013 | Toyota Hilux Cars & Trucks

2 Answers

Toyota ipsum 2002 check light comes on with code P1346.

Definition of Diagnostic Trouble Code P1346 Audi: Ignition Coil Power Output Stage 3 Short to B+ BMW: Misfire During Start Cylinder 3 Buick: Intake Camshaft Position [CMP] Sensor System Performance Cadillac: Intake Camshaft Position [CMP] Sensor System Performance Chevrolet: Intake Camshaft Position [CMP] Sensor System Performance Ford: Fuel Level Sensor B Circuit GMC: Intake Camshaft Position [CMP] Sensor System Performance Lexus: VVT Sensor Rang/Performance Problem (Bank 1) Lincoln: Fuel Level Sensor B Circuit Mazda: Fuel Level Sensor B Circuit Mercury: Fuel Level Sensor B Circuit Oldsmobile: Intake Camshaft Position [CMP] Sensor System Performance Pontiac: Intake Camshaft Position [CMP] Sensor System Performance Saturn: Intake Camshaft Position [CMP] Sensor System Performance Toyota: VVT Sensor /Camshaft Position Sensor Circuit Range/ Performance Problem (Bank 1) Volkswagen: Ignition Coil Power Output Stage 3 Short to B+

Mar 12, 2010 | 2001 Toyota Sienna

2 Answers

1986 toyota corolla 2E engine high fuel consumption

why does my normal rpm always bug down when the engine start?and when I started to use the air con, the rpm was playing. It doesnt go on a certain point. it always range at 800rpm then it will down to 700. what am I might do to solve this probem?

Feb 18, 2010 | 1986 Toyota Corolla 2 Door

1 Answer

I have an 88 toyota pickup (4x4 3L V6), and I wanted to mount 16x8 rims with 33x11.5 tires. Has anyone used this set up, and if so, have you ran into anyproblems. The guys at my local tire shop suggest...

i have due to under powered engine constant 3rd to 4th and back shifts are needed i wore out the 3rd gear in a matter of 6 months and about six thousand miles

Feb 18, 2010 | 1988 Toyota Pickup

Not finding what you are looking for?
2000 Toyota Camry Logo

Related Topics:

424 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts


Level 3 Expert

83850 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22413 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8841 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides