Question about 2000 Plymouth Neon

1 Answer

Break light keep comming on.

I have to constantly put break fluid in it 2-3 times a week why?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 15 Answers

It must be leaking it some where. brake fluid wont go any where unless its leaking it. check for fluid leakage around the brake calipers or also aaround the brake mastercylinder

Posted on Dec 25, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My 2000 dodge caravan sport keeps running out of brake fluid


AMSOIL Series 600 DOT 4 Brake Fluid is a good brand of brake fluid. Series 600 DOT 4 Racing Brake Fluid (BF4) AMSOIL Brake Fluids provide superior high-temperature performance in auto/light truck, high-performance, racing and powersports applications.-------------------------------------------------------------------------------------
Super VAG K+CAN V4.8

Jan 22, 2013 | 2000 Dodge Caravan

1 Answer

2000 jeep cherokee sport has some transmission slippage, does not come out of gear.


Once the ****** slips and assuming the fluid is full it will need to removed from the truck and rebuilt. Sorry.

Oct 12, 2012 | 2000 Jeep Grand Cherokee

1 Answer

The drivers side is getting more fluid than the passenger do i have lines mixed up? i have both disk and drum breaks


You need to bleed the lines. Loosen the bleeder screws, one at a time. Place a length of small vacuum hose over the tip of the bleeder screw. (about 2 feet) Put the other end of the hose in a half full clear glass bottle of brake fluid. . You must keep the end of the hose in the bottle submerged at all times, and keep the brake fluid reservoir full at all times. Now, pump the brake pedal until there are no bubbles coming out of the hose. Tighten that bleeder screw, and repeat the process on each wheel.

Aug 22, 2011 | 1998 Plymouth Neon

1 Answer

My 2006 Camry runs out of brake fluid very often. last time I fill it full and it lasted only 2 months until the brake light started flashing. I haven't noticed any leaks. what could be the issue. Roy


your break system should never need fluid, as your breaks wear down you will see a little lower level in the resivour. if you are adding that much fluid and you don't see any leaks at any of the wheels, your break booster could be leaking. where you add the fluid at the master cylinder there is a vacume booster that has a diafram in side, look carefully around the bottom of this diafram out side under the hood, I have seen them leak inside also where the break passes thru the fire wall you may feel the oil on the carpet under the dash. if you see no leaks keep looking you are loosing oil some where

Apr 22, 2011 | Toyota Camry Cars & Trucks

1 Answer

Break light on dashboard is on constantly and keeps beeping, don't know why it is on!


Check brake fluid level could be low, if not low disconnect brake light switch at master cylinder sit on side of master if light goes off replace that switch if light stay on check parking brake switch at parking brake peddle.

Jan 07, 2010 | 1994 Buick Park Avenue

1 Answer

Break light keeps coming on


ok, as far as you brake light gos it will come on if you have air in the system try bleeding the system and also will come on if your front pads are getting really thin,as far as your change oil light you need too reset the computer by turning the switch on(but not starting the car) then pump the gas peddle 3 times real fast you may have too do this several times my trucks a pain in the neck too do takes about 15 times

Mar 04, 2009 | 2005 Chevrolet Malibu

1 Answer

I HAVE A 1998 dodge ram 318 1500 two wheel drive the abs and brake light come on but it brakes fine when the brake light and abs light go out i have to really push the pedal down to stop the petal feels...


you need to check the break fluid level now
i do think it is too late tho
what it sounds like is air in your break system
you need to bleed the breaks not doing so can damage the break booster
you need to add fluid to the booster now as it will help and may not need bleeding
if you keep driving the way it is you may loose your breaks all together which is a danger to you and others
you need to have this attended asap it is not a hard job or expensive job
when you put fluid in the car pump the breaks every time you need to or they get soft this forces the fluid through the pips altho the air may have no where to escape which is why we bleed them to let the air out
hope this helps
ricko

Dec 27, 2008 | 1987 Dodge Pickup 2WD

Not finding what you are looking for?
2000 Plymouth Neon Logo

Related Topics:

116 people viewed this question

Ask a Question

Usually answered in minutes!

Top Plymouth Experts

yadayada
yadayada

Level 3 Expert

70347 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6876 Answers

Are you a Plymouth Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...