Question about 2003 Chevrolet Silverado 2500HD

1 Answer

Reprogramming oem silverado remote

I need to reprogram my oem 2003 silverado remote. How do i do this??

Posted by on

  • 1 more comment 
  • Anonymous Jan 22, 2009

    i tried doing this but when I held the unlock/lock buttons the door didn't lock and unlock

  • johnnycom Jan 29, 2009

    I tried doing this but when I held the unlock/lock buttons simultaneously the doors didn't lock and unlock even after a minute. The remote seemed to program but only worked once or twice. Why won't the remote stay programmed?

  • Anonymous Mar 26, 2014

    Remote key not working needs reprogramming

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 379 Answers

1.) from driver seat , close all doors.
2.) insert key into ignition.
3.) while HOLDING the door lock switch in the unlock position , cycle the ignition switch ON OFF ON OFF.
4.) release the door unlock switch , the doors will lock and unlock to confirm programming mode.
5.) press and HOLD the UNLOCK button and LOCK button simultaneously on one transmitter , after a delay of 15 - 30 seconds , doors will lock and unlock to confirm programming of that transmitter.
6.) repeat step number 5 for up to 4 remotes.
7.) turn ignition switch to the RUN position to exit the programming mode.
8.) test remote operation of each remote.

fixed ya

Posted on Dec 25, 2008

  • Rick Byrd
    Rick Byrd Jan 03, 2009

    follow up - did this information FIX YA ? thanks for voting !

  • fsalin11 Jul 06, 2011

    This was help full, I did it step by step, i just found out, You got to turn the key all the way just before to start you engine 3 times then it will horn by itself, Then you press both buttons for about 13-15 seconds and It will horn again, Sign that it is programmed, Then I turned On my truck and everything went well soo far.

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Saab experts


May be keyfob needs reprogramming.

Keyfob remote reprogramming is not very difficult but on some cases it can be done by dealer service tools.

If the remote s faulty then key fob will not get programmed.

Insert the key in ignition. Turn the key to on position, and cycle the key three times off-on-off-on-off-on. Then with the key fob remote select your remote and then try to operate the vehicle with remote.

These are just the basic procedure, but sometimes it will not help.

On that case dealer is the only option.


---------

There are few much related troubleshooting links mentioned below for remote key fob reprogramming. I suggest you to go through the list and click the link below to go through its details and procedure: -------




Theft indicator not letting car to start?

http://technoanswers.blogspot.in/2012/02/theft-indicator-not-letting-car-to.html

-------------



2009 Toyota Highlander: Smart Key Not getting Detected?

http://whatisbyme.blogspot.in/2012/05/2009-toyota-highlander-smart-key-not.html


----------

2007 Toyota Prius: Reprogram Remote Keyfob?

http://whatisbyme.blogspot.in/2012/05/2007-toyota-prius-reprogram-remote.html

-----------

Pin that holds the flick key part to the key fob?

http://whoisbyme.blogspot.in/2012/07/pin-that-holds-flick-key-part-to-key-fob.html

-------------


2006 Toyota Hilux: Programming New Key?

http://technoanswers.blogspot.in/2012/04/2006-toyota-hilux-programming-new-key.html

----------

Where is Key chip memory located on 2004 ford Freestar?

http://technoanswers.blogspot.com/2012/01/where-is-key-chip-memory-located-on.html

----------

Ford Keyless Remote Fob Reprogramming?


http://schematicsdiagram.blogspot.com/2011/12/ford-keyless-remote-fob-reprogramming.html

----------

After getting car washed, check engine light is ON and key less entry not working, tried reprogramming. Also car shows fuel pressure?

http://schematicsdiagram.blogspot.com/2011/12/after-getting-car-washedcheck-engine.html

-----------

Audi A8 Key Fob Programming?


http://technoanswers.blogspot.com/2011/12/audi-a8-key-fob-programming.html

----------------

Oldsmobile Aurora Key Fob Reprogramming?

http://technoanswers.blogspot.com/2011/12/olds-aurora-key-fob-reprogramming.html

-------------

Buick Lesabre Key Fob Reprogramming?

http://technoanswers.blogspot.com/2011/12/buick-lesabre-key-fob-reprogramming.html

---------------

Keyfob remote not working on 2003 Ford E350 Econoline?

http://technoanswers.blogspot.in/2012/01/keyfob-remote-not-working-on-2003-ford.html

-----------

KeyFob will open the doors but not start on BMW?

http://technoanswers.blogspot.in/2012/02/key-will-open-doors-but-not-start-on.html

------------

Mitsubishi Car Key Not getting detected after replacing ECM

http://repairhelpcenter.blogspot.com/2012/11/mitsubishi-car-key-not-getting-detected.html

-----------

Key Fob will not lock and unlock doors?

http://technoanswers.blogspot.in/2012/02/key-fob-will-not-lock-and-unlock-doors.html

-------------

2000 Jeep Cherokee Limited: KeyFob Remote Not Working?

http://schematicsdiagram.blogspot.in/2012/06/2000-jeep-cherokee-limited-keyfob.html

-----------

Chevrolet Malibu: Key Stuck in ON position?

http://technoanswers.blogspot.in/2012/04/chevrolet-malibukey-stuck-in-on.html

-----------

2012 Dodge Ram: Ignition Key will not release?

http://whoisbyme.blogspot.in/2012/07/2012-dodge-ram-ignition-key-will-not.html

--------------


These details will help.

Thanks.

Dec 04, 2012 | Cars & Trucks

1 Answer

Peugeot 206 key fob


Try with brand new key fob battery and see.If that helps.
Otherwise May be keyfob needs to be reprogrammed.

KEYFOB PROGRAMMING


Keyfob remote reprogramming is not very difficult but on some cases it can be done by dealer service tools.

If the remote s faulty then key fob will not get programmed.

Insert the key in ignition. Turn the key to on position, and cycle the key three times off-on-off-on-off-on. Then with the key fob remote select your remote and then try to operate the vehicle with remote.

These are just the basic procedure, but sometimes it will not help.

On that case dealer is the only option.


---------

There are few much related troubleshooting links mentioned below for remote key fob reprogramming. I suggest you to go through the list and click the link below to go through its details and procedure: -------

2009 Toyota Highlander: Smart Key Not getting Detected?

http://whatisbyme.blogspot.in/2012/05/2009-toyota-highlander-smart-key-not.html


----------

2007 Toyota Prius: Reprogram Remote Keyfob?

http://whatisbyme.blogspot.in/2012/05/2007-toyota-prius-reprogram-remote.html

-----------

Pin that holds the flick key part to the key fob?

http://whoisbyme.blogspot.in/2012/07/pin-that-holds-flick-key-part-to-key-fob.html

-------------


2006 Toyota Hilux: Programming New Key?

http://technoanswers.blogspot.in/2012/04/2006-toyota-hilux-programming-new-key.html

----------

Where is Key chip memory located on 2004 ford Freestar?

http://technoanswers.blogspot.com/2012/01/where-is-key-chip-memory-located-on.html

----------

Ford Keyless Remote Fob Reprogramming?


http://schematicsdiagram.blogspot.com/2011/12/ford-keyless-remote-fob-reprogramming.html

----------

After getting car washed, check engine light is ON and key less entry not working, tried reprogramming. Also car shows fuel pressure?

http://schematicsdiagram.blogspot.com/2011/12/after-getting-car-washedcheck-engine.html

-----------

Audi A8 Key Fob Programming?


http://technoanswers.blogspot.com/2011/12/audi-a8-key-fob-programming.html

----------------

Oldsmobile Aurora Key Fob Reprogramming?

http://technoanswers.blogspot.com/2011/12/olds-aurora-key-fob-reprogramming.html

-------------

Buick Lesabre Key Fob Reprogramming?

http://technoanswers.blogspot.com/2011/12/buick-lesabre-key-fob-reprogramming.html

---------------

Keyfob remote not working on 2003 Ford E350 Econoline?

http://technoanswers.blogspot.in/2012/01/keyfob-remote-not-working-on-2003-ford.html

-----------

KeyFob will open the doors but not start on BMW?

http://technoanswers.blogspot.in/2012/02/key-will-open-doors-but-not-start-on.html

------------

Mitsubishi Car Key Not getting detected after replacing ECM

http://repairhelpcenter.blogspot.com/2012/11/mitsubishi-car-key-not-getting-detected.html

-----------

Key Fob will not lock and unlock doors?

http://technoanswers.blogspot.in/2012/02/key-fob-will-not-lock-and-unlock-doors.html

-------------

2000 Jeep Cherokee Limited: KeyFob Remote Not Working?

http://schematicsdiagram.blogspot.in/2012/06/2000-jeep-cherokee-limited-keyfob.html

-----------

Chevrolet Malibu: Key Stuck in ON position?

http://technoanswers.blogspot.in/2012/04/chevrolet-malibukey-stuck-in-on.html

-----------

Theft indicator not letting car to start?

http://technoanswers.blogspot.in/2012/02/theft-indicator-not-letting-car-to.html

-------------

2012 Dodge Ram: Ignition Key will not release?

http://whoisbyme.blogspot.in/2012/07/2012-dodge-ram-ignition-key-will-not.html

--------------


These details will help.

Thanks.

Nov 28, 2012 | Peugeot Cars & Trucks

1 Answer

Tailgate on a 2002 trailblazer will not open. unlock button wont let it open. what fuse do I need to check or do I open from inside?


  • There was a Technical Service Bulletin concerning this.

  • Bulletin No.: 03-08-52-002
  • Date: March 27, 2003

  • Technical - Subject:
  • Remote Keyless Entry Inoperative (Reprogram Liftgate Module)
  • Models:
  • 2002-2003 Chevrolet TrailBlazer, TrailBlazer EXT
  • 2002-2003 GMC Envoy, Envoy XL
  • 2002-2003 Oldsmobile Bravada
  • Condition
  • Some customers may comment that the Remote Keyless Entry (RKE) is inoperative at times.

  • Cause
  • An anomaly has been identified with the software in the Liftgate Module (RKE functions). The Liftgate Module software is affected when the temperature is approximately 40°C (104°F).

  • Correction
  • Using normal SPS reprogramming procedures, reprogram the LGM Liftgate module. The information was released on TIS version 2.75 or newer broadcast in March 2003.

  • There is a fuse block under the rear seat on the drivers side. Fuse # 3 and # ^ are the ones you will check for the Lift Gate.
  • Often the problem can be in the harness going to the module.
  • Sometimes the module needs replaced and then reprogrammed.
  • Here is a copy of your owners manual for free http://www.extendedgmwarranty.com/owners-manual/chevrolet/2002-Chevrolet-TrailBlazer.pdf
  • If you have any comments please feel free to leave them here.
  • Hope this helps and thank you for using FixYa.
Regards, Tony

Oct 01, 2011 | 2002 Chevrolet TrailBlazer

1 Answer

How do I reprogram my remote key-less entry fob on my 2003 Chevrolet 2500 HD extended cab pickup?


sitting in vehicle all doors closed hold down the unlock button on drivers door while holding down turn key on and off three times you should hear locks cycle when they cycle release unlock button and push lock and unlock button on remote at same time for 15 seconds (holding down) locks should cycle to signal remote learned repaet for each remote when done cycle key to exit program mode

Nov 17, 2010 | 2003 Chevrolet Silverado 2500HD

2 Answers

Replaced the battery in the remote, but still nothing when I go to lock or unlock my door or set off the alarm, nothing happens.


Your remote needs to be "reprogrammed" after battery replacement. Not sure if yours is done in this manner. This is how my remote is reprogrammed on my 1999 Corvette. Stand beside drivers side door, point remote at the car while holding the Lock and Unlock buttons at the same time. Within 10-15 seconds the horn should beep letting you know the reprogramming was successful.

Dec 23, 2009 | 2003 GMC Yukon XL

1 Answer

2003 honda pilot, remote control doesn't work even with new battery , light on remote control doesn't blink


did the light blink when it worked? It may need to b reprogrammed. check the owners manual, it should tell you how to program. If the fob is dead, check ebay for a new one, usually 50 bucks and the reprogram

Dec 06, 2009 | 2003 Honda Pilot

1 Answer

Need reprogramming instructions for gmc yukon


Hi
dose the other remote work?
check to make sure the battery clip is not broken in the remote
you shouldn't have to reprogram unless you have replaaced the remote

Jun 02, 2009 | 2003 GMC Yukon

2 Answers

Power locks won't work from remote


make sure the button inside the remote makes contact with the outer plastic, might want to open it an try to press it an see if it works...!

May 28, 2009 | 2000 Ford Ranger SuperCab

1 Answer

2003 SILVERADO REMOTE WONT UNLOCK


Check the relays for the power unlock. They are in one of the fuse panels. Push the door unlock button and find the relay that is clicking. This should fix your problem

Mar 13, 2009 | 2004 Chevrolet Colorado

3 Answers

Power windows and door locks don't work on 2006 silverado


it's not the girlfriend, it is the PDM, passanger door module, got mine a rock auto for 120.00, need to get the one specific for your VIN, not on most parts lists, it is a control board for all power windows and locks and the keyless entry. My cadillac was doing exsactly what your truck is doing. once you put the new one in you need to reprogram the remotes, not too hard, hold down lock button on drivers door, ignition on/off twice, let go of the door lock button, press both unlock, lock buttons and hold untill you hear the lock unlock. your program sequence might be slightlyl different check the web.
good luck.

Jul 22, 2008 | 2003 Chevrolet Silverado 2500HD

Not finding what you are looking for?
Cars & Trucks Logo

819 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

63801 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21990 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...