- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
anti theft malfunction. seriously put your ear near the filler neck uncapped and have someone turn the key. is there s whining. then that rules out a bad fuel pump> try carefully priming the injectors with fuel and then crank. standby with a garden hose in the even it backfires and pukes out the fuel. remove a plug wire and put any plug in the boot rest it against the valve cover have someone cranlk and looks for spark. 2 main causes for no start lack of fuel, lack of spark
Yes it sounds like you mixed up the plug wires. The firing order is 1 2 3 4 5 6. Pretty simple to remember. The cylinders are 1 3 5 on the firewall side with number one being the front cylinder (Where the belts are). The radiator side cylinders are 2 4 6 with 2 being the front cylinder.
well what kind of engine you have? on 3.0L the alternator is at the front right side of the engine on the top. there are two bolts to remove one you can see just by looking at it but the other one is in the back and you cant see it. just feel with your hand where is it and you socket n rachet and remove it and disconnect the wire that are connected to the alternator. CAUTION: before you remove the bolts take the belt off by turning the belt tensioner clockwise. hope it helps.
My apologies for the delayed response. I am going back to answer - unanswered questions. I have only been on this site for the past 4-months. Questions Posted have exploded (+55%) since joining. I do not know if you still need this information, but I am answering it either way.
I do not know if you have the 2.5L (4Cyl) or the 3.3L (6Cyl); however I have included both below.
For the 2.5L (4Cyl): Firing Order: 1-3-4-2 Cylinders: (back of engine) 1-----2-----3------4 (front of engine) Distributor: .....(back) .....1...3 (+).........(+)-screws .....2...4 .....(front)
For the 3.3L: Firing Order: 1-2-3-4-5-6 Cylinders: (back of engine) 1------2------3 4------5------6 (front of engine) Ignition Coil: (back) 6---3 4---1 2---5 (front)
Again my sincerest apologies....
Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.com!