Question about 1998 Buick Park Avenue

1 Answer

Replace front turn signal light bulb on 1998 Buick Park Avenue

I was able to pull out my headlight assembly, but I can't figure out how to access the turn signal assembly which is beneath the headlight assy.

No external screws, and I also tried to pop off the turn signal cover from the exterior

I need to figure out how to get inside to replace the turn signal bulb.

Thanks for any help.

- Jay

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 12 Answers

Should be plastic clips holding it up...
if not let me go to the junk yard and look at a park ave...I know all buicks but this one is blank in my mind.

Posted on Mar 26, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to replace rear turn signal bulb 99 park avenue


Replacing a front turn signal bulb is easy, as I just did my own. On the front driver's side, look at the wheel well splash panel and you'll see one plastic pin. Use a claw hammer and pull the pin out. Now just pull the plastic splash panel out of your way.

Look behind the front bumper and you'll see the light fixture. The top left wire and & bulb socket is right there. Give the socket a 1/4 turn to the left and you have access to replacing the bulb which is a 194, available at any parts store, 2 for $5.00.

Jul 07, 2012 | 1999 Buick Park Avenue

1 Answer

I need to replace the turn signal bulb on the driver side front on my 2002 buick park avenue.


SHOULD BE ABLE TO REACH UP IN THE FRONT OF BUMPER AND TWIST IT OUT. OR IF YOU SEE BOLTS ON THE FRONT OF TURN SIGNAL UNSCREW LENS

Jan 04, 2011 | 1998 Buick Park Avenue

2 Answers

How do you replace the front turn signal on a 2005 Buick Terraza?


Changing front, right turn signal on 2005 Buick Terraza: Open hood; when facing the front of vehicle, the right turn signal is on the passenger side (left). The headlight assembly needs to be removed to easily reach the turn signal. On my vehicle, there is a 10 mm screw on the left side. Remove it. There is L-shaped pin on the right side of the headlight assembly. Swing the pin counter-clockwise (to the left). Pull the pin straight up to remove. The headlight assembly is now loose, but there is a pin snapped in a socket on the back of the assembly that still holds the assembly. Pull the headlight assembly hard and straight to the front of the vehicle. When it snaps loose, the assembly is now held just by the rubber gasket surrounding the assembly. You need to gently work the right side of the gasket out of the grill cowling. The assembly should pull straight out. The wires are long enough to lay the headlight assembly in the engine compartment. Finally, the turn signal is now accessible. Twist the light holder counter-clockwise and pull out the light holder. Change the bulb. Do not punch your man-card for credit until you have successfully reinstalled the headlight assembly. It goes back in a little easier the second time. Once you have put the L-pin in place, the screw back, and successfully tested the lights, you can now punch your man-card.

I give the mechanical engineers and designers a D-minus instead of an F only because I was successful on the first try. No light bulb on anything commonly used by people should be this hard to figure out.

Sep 07, 2010 | 2005 Buick Terraza

2 Answers

1999 buick park avenue low-beam headlight out


there are two little brackets you have to pull on to release the bulb housing they are on the top/rear of the housing assembly

Nov 24, 2009 | 1999 Buick Park Avenue

1 Answer

1999 buick park avenue passenger low-beam out / bulb inaccessible


There are 2 screws that hold the head lamp assembly.Remove the screws and pull the headlamp out.You should be able to remove the low beam bulb out.Check and make sure it works before you put it back together.Good luck.

Nov 24, 2009 | 1999 Buick Park Avenue

1 Answer

How *** I change the headlight on a 1988 Buick


you do not need to remove the lens assembly , only the bulb is replaced, you may need to loosen the battery if its in the way. if i remember correctly there is a black ring just a quarter turn then bulb pulls out. if no ring its just a quarter turn with the bulb and it out

Nov 08, 2009 | 1989 Buick Park Avenue

1 Answer

Need to replace rear brake light on a 1999 Buick Park Avenue. How do I remove the plastic lenses or assembly?


you will need to open the trunk and remove the carpet covering the inside where the tail lights are, find 2 or 3 nuts which are probably 8 or 10 mm,so use a socket and ratchet,remove the nuts and pull the tail light asembly out from the back and you will find the tail light bulb sockets. release the little latch/lock clips while turning the socket assembly about 1/4 turn counter clockwise and you can check each bulb. watch where the wire harness for each socket and also the tail light assembly is so you dont pinch or damage the wires when putting the tail light assembly back in. your owners manual may also give you these instructions and will tell you the correct bulbs to use for tail, brake and turn signal lights.

Oct 27, 2009 | 1999 Buick Park Avenue

1 Answer

1998 buick park avenue turn signal problem


if the right side blinks normal, the flasher MAY be OK?? do the hazard lights flash all lights?it should. make sure you have all the correct bulbs. if so, replace the flasher unit. if the right side works turn it on and follow the ticking to find th eunit.

Oct 06, 2009 | 1998 Buick Park Avenue

1 Answer

How do you change out the front turn signal? Cannot figure out access to the bulb.


ON THIS VEHICLE THERE SHOULD BE ON THE LIGHT FIXTURE 2 TABS ON RIGHT AND LEFT SIDE YOU PULL UP ON BOTH OF THEM AND THE LIGHT SHOULD COME OUT NOT 100% SURE BUT I THINK THATS HOW KINDA HARD TO EXPLAIN WITH OUT DOING IT :)

Jul 06, 2009 | 2000 Buick Park Avenue

1 Answer

How do I change the headlight in my 1998 Buick Park Avenue?


Open the hood and look behind the headlight lens housing. There should be a place on the back of it with a socket and wires. Grab the socket and rotate it CCW about a 1/4 turn. The socket should be able to be pulled out. The lamp can be pulled off and replaced at that point. These light assemblies do vary a bit so you may encounter some slight differences.

Feb 05, 2009 | 1998 Buick Park Avenue

Not finding what you are looking for?
1998 Buick Park Avenue Logo

596 people viewed this question

Ask a Question

Usually answered in minutes!

Top Buick Experts

yadayada
yadayada

Level 3 Expert

71338 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22059 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7018 Answers

Are you a Buick Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...