Question about 2006 Toyota Camry

1 Answer

Trans!!! got new engine running but now i have no reverse and i have drive in all other gears except park, which isnt locking the front wheels when engaged

Posted by on

  • Anonymous Mar 30, 2014

    Gears engaged but drive train doesn't move

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,114 Answers

Sounds like transmission gear selector cable not positioned correctly if not look into the parking paw inside transmission you say "new" motor did you make sure torque converter is in properly?????

Posted on Dec 24, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2000 Sonata


check your trans fluid then consider having the trans serviced

Mar 02, 2014 | Cars & Trucks

1 Answer

Vechile will not shift into park or reverse


The first thing to check is the linkage. Sometimes the linkage will slip, Block the wheels on the car (both front and rear) to prevent rolling. Locate the shift linkage on your transmission, and loosen the nut. You should be able to move the shift lever through all the gears, including "P" and "R". Place the transmission shift lever in "Park" (on the transmission) then move the shift lever (inside the car) in the "P" position and tighten the nut (not a bad idea to use a new locking nut here) You should now be able to shift through all gears. If this does not work, you have a more serious problem that may include a worn or broken belt or broken parking pawl inside the transmission.

Apr 05, 2010 | 1994 Cadillac DeVille

1 Answer

Hi, I own a 1997 Ford E 350 Econoline, I have the following transmission engagement problem: Truck will not start: Transmission will not engage any gear, neutral or park. The shift lever feels like is not...


The weld on the manual lever is known to break loose. First, with the wheels off the ground, with the lever in the park position, does the drive shaft lock in park? If yes or no sometimes, drop the trans pan. I bet the nut on the lever camd loose.

Mar 31, 2010 | 1994 Ford Econoline

2 Answers

I have a 1996 pontiac grand am the trans shifts fine in all gears but wont move seems to be stuck into park i can feel it going into gear and tries to move and trans isnt slipping it is a automatic when...


Tip on end of park rod has slipped and is staying in the park position. Put car in neutral and get out and rock car back and forth by hand. Tip will slip out and car should move. This will not fix the tip problem as they are crimped on and the crimp has slipped. I installed a master electrical switch and never put the trans in park. I start and stop car in neutral and use switch to shut of electrical. Costs $ 800 to fix trans as park rod is last item out of trans. Cheap solution for me as car is a beater and am driving until it quits. Best of luck.

Mar 18, 2010 | 1995 Pontiac Grand Am

1 Answer

Runs good in reverse but it forward it bucks and dies?


need more information re: engine,trans.(man. or auto.) two or four wheel drive, check u joints (grab drive line when in park w/engine offtry to rotate,while watching both front and rear.)

Dec 28, 2009 | 1996 Jeep Cherokee Country

1 Answer

Car will not shift into gear


Sounds like a linkage/cable to me. Disconnect the linkage at the transmission and move the shift actuator by hand to see if there is the same things happening. Don't try to do this with the engine running unless someone is holding the brake inside the car.

Jul 03, 2009 | 1997 Mercury Cougar XR7

1 Answer

JUST STARTED HAVEING TRANNY PROBLEM SO I'M ABOUT TO CHANGE THE FILTER HOW MUCH ATF4 QUARTS OF FLUID DOES A 2004 JEEP GRAND CHERAKEE TAKE WITH I BOTTLE OF LUCAS TRANS. FIX?


Best way to refill is to put additive in first, then add fluid till full. If you can do this safely, run car with both rear wheels off the ground after filling and run through the gears. Make sure you do not try to go from foreward gears to reverse or park while wheels are spinning. When doing this vehicle should be on a lift or on very good jackstands with nothing in front of car for a good distance. Alternate method is to drive slowly putting little pressure on trans till gear shifts have been completed. After this, re-check unit for full.

Mar 10, 2009 | 2001 Jeep Grand Cherokee

2 Answers

2000 chevrolet tahoe - can't put the gear stick in park. Can put gear stick in reverse and drive. Can drive and drive in reverse. But cant put gear stick in park.


The Shift Interlock Is Not Working Check If Brake Lights Work If Not May Be A Fuse Prob Or Brake Light Switch The Switch actuates The Lock

Mar 04, 2009 | 1995 Chevrolet Tahoe

1 Answer

1983 dodge power wagon 4x4


put truck in reverse hit brakes constantly and then go for drive in first gear. .... problem was brakes got all locked up ...... to not drive a vehicle is the worst thing u can do to it . hope i helped ELI

Nov 02, 2008 | 1983 Dodge Ram 50 4WD

Not finding what you are looking for?
2006 Toyota Camry Logo

Related Topics:

154 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

60667 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21936 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...