Question about 1996 Oldsmobile Cutlass Supreme Coupe

1 Answer

Won't start plug wire 6 was burn up, change the plug and the middle coil pack, ran for about 3 mile. tried to start it the next morning, now all it does is turn over, will not crank. so the people at a parts place told me that I had to change all the coil pack, plugs and wires, and the module, what do you think, thanks amanda

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 63 Answers

Probably the module, Id start there because it might be the least expensive part.

Posted on Dec 24, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 2007 buick rendezvous. My husband is trying to change the spark plugs and wires. But he doesn't know where each wire goes. Can you please help me how to put them back.


The coil pack should be marked. If not, you can look up the coil on one of the auto parts websites for a photo.
Looking at the top of the coil, with the wiring plug on the left, the towers are 6-3-5-2-4-1.
Cylinders 1-3-5 are next to the windshield, and 2-4-6 are next to the radiator.

Nov 15, 2015 | Buick Cars & Trucks

2 Answers

I have a 98 4runner with 300000 miles. It's been running excellent but day before yesterday it started sputtering like a tractor when driving and idoling. Service engine light blinks when in overdrive, and...


First check the plugs. Pull the #6 plug and look at the electrode. If it's wet and/or dark (black) it's probably not firing correctly. What is the spark plug gap? Is the center electrode eroded (not flat on the end)? Swap in another plug and see if it makes any difference. How old are the plugs?

Second, check the wires. Did you replace the wire(s) when you changed the coil pack? They should be replaced periodically (I replace the wires on my '96 4Runner at about 100k miles). Check the wires with an ohmeter. Resistance should be around 16-17.5k ohms (depends on length).

FYI, each coil pack on your vehicle fires two spark plugs. The #6 spark plug is fired by the #3 cylinder coil pack, so if the coil pack were bad, most likely both the #3 and the #6 plugs would not fire.

Feb 14, 2015 | 1998 Toyota 4Runner

1 Answer

Bad coil pack


If your truck has spark plug wires, you will want to change those as well, as a bad wire can cause an ignition coil to short itself out internally.

Jan 26, 2014 | Toyota Tacoma Cars & Trucks

1 Answer

My 2003 vw passat v6 was recently installed with a new coil pack wires and sparks it ran great for 1000 miles now it runs rough i noticed that the coil has a 1 2 3 6 4 5 sequence when standing...


firing order is 1-4-3-6-2-5.
physical cylinders and corresponding plugs and wires:
6-5-4 drivers side back to front.
3-2-1 pax side back to front.

Jan 23, 2014 | 2000 Volkswagen Jetta TDI

2 Answers

What are the to coil packs on a set of spark plug wires on a 2001 4.3 chev blazer for and what plugs do they go on


Your Coil Pack Is Separate And Plugs Into The Middle Of Distributor Cap.Follow The Middle Wire To Coil Should Be On Passenger Side
Easy Quick Change Out. Cost Is Around $40

Mar 11, 2013 | 2000 Chevrolet Blazer

1 Answer

2003 Nissan Maxima. Problem just started on freeway this morning. Engine hesitates with loss of power four or five times. "Check Engine Soon" light blinks on dash. Codes P0306P/D(cylinder 6) and...


Number 6 is in the front on the driver's side. I would swap the coil and wire with another to see if the problem moves with the coil. If yes, replace coil. If no, check plug and run a compression test (to check for burned valve or head gasket leak). Please let me know if you have any other questions.


jturcotte_6.gif

Nov 02, 2010 | Nissan Maxima Cars & Trucks

2 Answers

My car backfires and will not start.


Cmashaft or crank shaft position snesors. Find their location and clean them 1st then re-try.

Aug 04, 2009 | 1995 Chevrolet Monte Carlo

1 Answer

97 Lesabre misfire


change all plugs an wires if you still get the misfire on #3or#6 the coil pack is parabley bad

Jul 17, 2009 | 1997 Buick LeSabre

1 Answer

1997 fordexplorer 5.0 awd #3 misfire


Change the coil that's the only thing you did not change and a coil if it's weak will cause a miss fire. You can do a compression check on #3 also. If timing was out the truck would be missing like crazy. Change the coil pack.

Mar 26, 2009 | 1997 Ford Explorer AWD

3 Answers

92olds cutlas cierra, 3.3 liter


how do you check your coils is there a photo that shows you how? or a video, web site




Jun 26, 2008 | 1992 Oldsmobile Cutlass Ciera

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

80 people viewed this question

Ask a Question

Usually answered in minutes!

Top Oldsmobile Experts

yadayada
yadayada

Level 3 Expert

70387 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6879 Answers

Are you an Oldsmobile Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...