Question about 2006 Dodge Ram

1 Answer

Transmission errors I'm getting a p0750 LR Solenoid Circuit code and a p0700 as well. How do I fix?

Posted by on

  • 2 more comments 
  • jcwenner Dec 27, 2008

    Thanks for the help.

  • yadayada
    yadayada May 11, 2010

    good luck on this solution.

  • yadayada
    yadayada May 11, 2010

    du understand electrical theory? if not leave it to the pro's

  • stacey duncan May 24, 2013

    hey, that was super helpful. you sure know your stuff.

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 2 Answers

The p0750 is a shift solenoid A malfunton,whice in turn will set the p0700 code,if you change the shift solenoid that should get rid of both codes.

Posted on Dec 24, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

These error code's were read: p0700, p0765, p0760, p0755, p0743. How can we fix this? Can it be the harness connection?


How To Fix Transmission A4CF2 Shift Problems / Check ...

? 18:46
https://www.youtube.com/watch?v=URUT3t8uUCw
Oct 27, 2014 - Uploaded by ProProjects
Thanks to ProProjects P0700 P0743 Torque Converter Clutch Circuit Electrical. ... P0765 - Shift Control Solenoid Valve D (Overdrive Solenoid) ... I have only two codes P0760 P0755 but my car is a mitsubishi galant 2.4 liters.

PDF]Technical Service Bulletin - RevBase

www.revbase.com/BBBMotor/Tsb//DownloadPdf?id=133873
Diagnostic Trouble Codes P0740, P0741, P0742, P0743, P0746, P0748, P0750,.P0755, P0760, P0765 or P0770 set ... P0700 - TCM MIL request signal.

Nov 07, 2015 | Cars & Trucks

Tip

I get code P1775 and P0700


Hi.

P1775 is the most relevant code. It means Solenoid valve latched in torque convertor.

P0700 is consequence of the P1775 code. P0700 means that there is an additional code stored in the TCM (transmission control module). The TCM stored code is probably related to the same problem. TCM codes can be pulled out at the car dealer or at an authorized garage. On this see: I get code p0700 after an OBDII scan.

P1775 is often coming with misfire codes.

P1775 means that the TCM detects that the solenoid valve located in the valve body (inside transmission pan under the filter) is not in the expected position (valve has two positions LR and TCC).
This cause rough shifting and driving problems.

Sometimes it is possible fixing the problem by resetting TCM and ECU. This is done disconneting battery cable (ensure you have anti-theft code if needed).

However, if a P1775 occurred, that means that there had been a solenoid valve malfunction, and problem must be fixed.

The first thing to do is replacing transmission fluid, and if needed also the filter. If the fluid level is poor, or if fluid is dark brown and satured with metal particles, that can cause solenoid valve malfunction.

If replacing the fluid does not help, then the most common problem causing the P1775 code is a defective solenoid in the solenoid pack.

Transmission shift solenoids are located in valve body, and they can be tested reading Ohms with a multimeter.

If that does not fix the problem (usually it does), the mechanic will proceed testing wiring to solenoid pack, TCM and solenoid valve, to find the reason of malfunction. Most common problems causing P1775 are related to tranny fluid and solenoid pack.

On automatic transmission problems see also: My car does not shift..

Ginko.

on Aug 17, 2010 | Chrysler Town and Country Cars & Trucks

1 Answer

P700 code po750


code p0700 refers to transmission control system/ MIL- malfunction===causes--wiring ---TCM replace the TCM
code p0750 refers to shift solenoid9SS) A-circuit malfunction===causes --wiring---shift solenoid ECM/TCM. When the TCM is replaced then it should be fixed as the TCM is common in both faults.

Oct 13, 2013 | 1999 Chrysler 300M

1 Answer

Chrysler sebring transmission codes p0700,p0750


These are tricky codes as they apply to the transmission and the safety features to prevent the vehicle from moving when its not supposed to move. There are many things that could cause these codes and they could also be codes tripped erroneously. To clear these codes remove negative cable from battery. Touch the negative cable to positive for one second. Reattach negative cable to battery. Start vehicle,....drive away happy........OR you will need to replace parts. Shift solenoid more than likely.

Mar 29, 2012 | 2000 Chrysler Sebring

3 Answers

What does these codes mean P1781, P0731, P1784 AND P0700 AND HOW DO I FIX THEM.


p1781 is manufacturer control transmission, p0731 is gear 1 ratio incorrect, p1784 is manufacturer control transmission, p0700 is trans, control system malfunction. all of these codes refer to tranny.This code normally points to a faulty transmission control module, but this is an expensive part and you should have an experienced Dodge technician diagnose the problem first. or a transmission specialist. the other codes are probably associated with the p0700 code. have a good day !

Apr 27, 2011 | 2001 Dodge Grand Caravan

2 Answers

I have a 2006 Dodge Durango. It has no power at take off and will not shift into high gear have two trouble codes which are P0750,P0700(that came from auto zone). Does anyone know what the trouble codes...


P0750-Low Reverse SOLENOID CIRCUIT

This DTC is strictly an electrical fault and cannot be caused by any internal transmission failure other than an open in the Transmission Solenoid/TRS Assembly. If the Transmission Solenoid/TRS Assembly is in need of replacement - do not replace the Valve Body.

To replace the TRS assembly you need to remove the valve body first and then the TRS assembly is mounted on top of the valve body.

Oct 10, 2010 | 2006 Dodge Durango

2 Answers

Code P0700 and code P0750 what do i have too change


P0700 Transmission Control System Malfunction
P0750 Shift Solenoid A Malfunction

It seems you have a internal transmission problem, I suggest you have your transmission inspected by a reputable transmission shop.

Jun 04, 2010 | 2004 Dodge Durango

2 Answers

P0700, P0750 and P0755 codes I was driving at 65 mph and the 2003 Dodge Caravan down shifter to low gear and the check engine light came on. It will not ship to high gear.


P0700 (M)
Check Transmission DTC's
This code indicates that the EATX (Transmission controller) has an active fault and has illuminated the MIL via a BUS message. The specific fault must be acquired from the EATX via a DRBIII tool. (Input or Output Speed Sensor failures often cause this code and are a common failure part on WJ Grand Cherokees

P0750
Shift Solenoid circuit.
Note: If code P1767 (Transmission Relay Always On) is also present: Replace transmission solenoid assembly. See note provided. When transmission is in limp mode the relay that provides power to the solenoid group is switched off. This is normal and is designed to provide operation in one gear only. Engineering department suggests to replace transmission solenoid assembly anytime these two trouble codes occur together. See applicable service manual section (21) for solenoid assembly replacement directions. IMPORTANT: When performing this repair always check torque on all valvebody accumulator cover plate screws. Proper torque specification is 70 inch pounds. If any accumulator cover plate screws are damaged or missing replace the valvebody assembly. NOTE: If any other trouble codes are present do not replace solenoid assembly. See test in the applicable Transmission Diagnostic Procedures Manual

P0755
Shift Solenoid B

Oct 14, 2009 | 2003 Dodge Caravan

1 Answer

1997 dodge caravan shifting problems have codes p700 and po750


p0700 is indicating a trans fault present..p0750 is low-reverse solenoid circuit..most likely defective solenoid pack on front of transmission..300-400 dollar part

Jun 10, 2009 | 2003 Dodge Neon

Not finding what you are looking for?
2006 Dodge Ram Logo

2,806 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

64034 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21990 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...