Question about 2005 Dodge Ram 1500

3 Answers

Front end vibrations at highway speeds

I have a 2005 dodge ram 1500 5.7l v8 hemi. The other day, after a day of driving during a snow storm in 4 wheel drive, the front end started vibrating. When it started I was already back in 2wd. It is not noticeable under 45mph. It was bad enough that my front license plate, holder and frame are gone. They must have fallen off on the highway...

Posted by on

  • 1 more comment 
  • Anonymous Mar 22, 2009

    I have a 2004 dodge ram 4.7 liter 4x4 with 36,000 miles it has a vibration that starts at 50mph and goes away at 65mph I got all new tires thats are balanced, and its still has a vibration.

  • Anonymous Mar 28, 2009

    had the same thing happen when it snowed. Found out that there was alot of snow packed inside the wheels and gave it a vibration. After a while, it went away when the snow fell off or melted. If it continues after that, I would definately say that there is something else wrong.

  • Anonymous Mar 21, 2014

    only started up recently but its getting a tad more violent in the vibrations i can see the steering wheel shaking when i get up to speed

×

Ad

3 Answers

  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

  • Contributor
  • 1 Answer

I have a 2002 Ram 1500 4x4 5.9 and I do have the same problem, It does it between 65/70 Mph, I thought it would help if i replaced the cv axle and it almost helped but still there... i guess i gonna have to replace the other side?! hope someone finds something quick

Posted on Jul 18, 2013

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Expert
  • 39 Answers

Could be something stuck inside one of the wheels or could be that the CV axle that gives you independent front suspension has gave in and causing the vibration but it being a 2005 I would bet something like mud in the wheel If you haven't backed up to get the front hubs to unlock that may be a problem also

Posted on Dec 24, 2008

  • 1 more comment 
  • dgoinstoo Sep 24, 2010

    It isn't tires. I've got a 2005 with the same vibration and I've had three sets of tires put on in a 60 day period from my local tire dealer because they thought the same thing, tires. The Dodge dealer said they couldn't feel any vibration (funny everyone else does). I've dealt with this issue for 50,000 miles and no one can't find the solution. The vibration goes away at 75 mph. Usually when you can drive out of a vibration it would be tires but not in this case. CV joints are tight, drive shaft is tight, tires are balanced. I'm thinking transmission?????

  • RoyinGa Sep 24, 2010

    could be the drive shaft has thrown a weight or the rear bushing in the trans is worn out

  • dgoinstoo Sep 27, 2010

    I'll hopefully be checking later this week and I'll post an update.

×

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 114 Answers

Sounds like you may have unbalanced tires. take your vehicle to a tire shop and have them balanced

Posted on Dec 24, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How to fix vibration and noise in front end


Bad Wheel Bearing = Vibration while braking? - DodgeTalk : Dodge ...

www.dodgetalk.com > ... > 3G Dodge RAM - General Talk
Sep 28, 2009 - The shop is telling me I have a loose left front hub bearing. Does this ...Oh, they also want $590 to fix it. This seems ... 2003 Black Ram 1500 Quad Cab SLT.... Gone but not forgotten 93 factory freak CC dakota lifted 4x4 318 ... Join Date: Jun2007 ... The weird thing is I don't notice any noise when driving. 2004 Ram 1500 SLT 4x4 Grinding sounds while turning???
Apr 1, 2011
Vibration above 65mph
Apr 8, 2008
Loud Humming Noise While Driving....
Nov 18, 2005
Strange humming noise that increases with speed
Nov 30, 2004
More results from www.dodgetalk.com

2006 dodge dakota p/u - Discussion on Topix


Nov 29, 2015 | 2007 Dodge Dakota Cab SLT

1 Answer

How do i get out of 4x4 on a 2000 jeep grand cherokee laredo


On these issue, there are few solved help links for troubleshooting the issue easily.-------

Click the link below: ---

No 4x4 light on dash?

http://repairhelpcenter.blogspot.com/2011/12/no-4x4-light-on-dash.html

-----------

4X4 Truck makes roaring noise in the front end?

http://schematicsdiagram.blogspot.com/2012/01/4x4-truck-makes-roaring-noise-in-front.html

-------------

Car will not go into 4WD high or 4WD low?


http://schematicsdiagram.blogspot.com/2011/12/car-will-not-go-into-4wd-high-or-4wd.html

--------------

No 4x4 light on dash?

http://repairhelpcenter.blogspot.com/2011/12/no-4x4-light-on-dash.html

------------

4 wheel drive system will not disengage?

http://technoanswers.blogspot.com/2012/01/4-wheel-drive-system-will-not-disengage.html

----------

4WD light is flashing and beeping? NO 4WD high?

http://schematicsdiagram.blogspot.in/2012/02/4wd-light-is-flashing-and-beeping-no.html

----------

2002 Jeep Wrangler: 4WD Idiot Light is ON?

http://technoanswers.blogspot.in/2012/06/2002-jeep-wrangler-4wd-idiot-light-is.html

----------

Traction control switch will not engage on 4WD High or Low

http://whoisbyme.blogspot.com/2012/10/traction-control-switch-will-not-engage.html

-----------

4WD light flashing and 4WD will engage after few minutes

http://repairhelpcenter.blogspot.com/2012/10/4wd-light-flashing-and-4wd-will-engage.html

------------

2008 Toyota Tundra: 4x4 Wheel Drive Light is Flashing?

http://technoanswers.blogspot.in/2012/05/2008-toyota-tundra-4x4-wheel-drive.html

----------

4x4 front differential will not engage the axle on ford?

http://technoanswers.blogspot.in/2012/02/4x4-front-differential-will-not-engage.html

-------

4x4 will not engage on Ford F150?

http://technoanswers.blogspot.in/2012/02/4x4-will-not-engage-on-ford-f150.html

-------------

Dodge Ram 4x4 light keeps flashing

4X4 LOW LIGHT IS FLASHING ON DASH

http://technoanswers.blogspot.in/2012/09/dodge-ram-4x4-light-keeps-flashing.html

----------

Ford 4x4 front wheels will not engage?

http://technoanswers.blogspot.in/2012/02/ford-4x4-front-wheels-will-not-engage.html

-------------

These details will help.

Thanks.

Dec 26, 2012 | 2000 Jeep Grand Cherokee

1 Answer

What would make 2005 dodge ram 1500 hemi 5.7L v8 . its bogging down when driving .i changed the cam sensor and it still does it


Could be a long list of things, including low fuel pressure, throttle position sensor, EGR valve, dirty air filter, and so on.
Is the check engine light on ?
Does it feel like it is lacking fuel, or air ? Is it not downshifting when it should ?

Oct 02, 2012 | 2005 Dodge Ram 1500

1 Answer

2005 Dodge Durango limited Hemi bogs down


what would make 2005 dodge ram 1500 hemi 5.7L v8 . its bogging down when driving .i changed the cam sensor and it still does it

Jun 18, 2012 | 2005 Dodge Durango

1 Answer

2003 dodge ram 2500 front end clicks


Most likely U Joints in the front axles. These will only turn in 4 wheel drive.

May 26, 2012 | Dodge Ram 2500 Cars & Trucks

1 Answer

Front end vibrates when braking at highway speeds


Most common cause for this is rotors that have become warped. It is not uncommon if you drive fast and brake hard OR live in hilly country or with heavy loads. The brakes get hot - the more they are used the hotter they may get. When they cool they do not cool evenly. If there is enough of the rotor left it may be resurfaced to true it. However - the thinner it gets the less heat it can handle. When rotors reach a minimum thickness (stamped on the rotor) they must be replaced.

Jan 16, 2010 | 2006 Dodge Ram 1500

Not finding what you are looking for?
Cars & Trucks Logo

1,543 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

79865 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...