Question about 1997 Jeep Cherokee Country

1 Answer

Fluid wont come out of washers

Front and back

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 328 Answers

1 check washer fluid level (obviously!)
2 ensure the tips that spray aren't frozen
3 check the fuse
4 check the pump(have someone activate the switch (key on engine off) and listen under the hood for a buzzing or whirring sound near washer fluid tank)

Posted on Dec 24, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

In my 2007 Saturn Vue there is what I think is an air pump which is cracked that one port is not connected to anything.


There is a electric motor that pumps washer fluid . Located in the bottom of the washer fluid tank .
Wash Operation (Front and Rear Wipers)
The front and rear washer systems use the same windshield washer fluid pump. When either the front or rear wiper is in the washer position voltage will be supplied to one side of the windshield washer fluid pump (depending on whether it is front or rear), while the other side of the pump is grounded.
At this point, the windshield washer fluid pump sprays solvent onto the windshield. When the front or rear washer is activated, the BCM receives an input from the switch that is activated. The BCM will control the wipers while in the WASH mode. The BCM will control either the front wiper relay or the rear wiper relay to turn on the wipers. The windshield wipers operate at low speed for 3 swipes and returns to the park position.

When turning on the washers do you hear the motor run ? Have some one try it while you listen at the washer fluid tank ! These pump motors do go bad .
turn OFF the ignition.
Disconnect the harness electrical connector of the windshield washer fluid pump.
Connect a test lamp from the windshield washer pump control circuit to a good ground .
Turn ON the ignition, with the engine OFF.
Press the front washer switch.
Does the test lamp illuminate?
YES or NO !

Nov 18, 2016 | Saturn Cars & Trucks

2 Answers

Where do I add washer fluid for rear window wiper on a 2000 blazer


Open the hatch and look for the fill cap along the sides .

Oct 23, 2015 | Cars & Trucks

1 Answer

Washer fluid pump not humming or trying to push fluid to windshie


disconnect the connector and have a friend push the washer button while you check the wires for power with a test light.its probably a bad motor, they are about $15.00

Dec 22, 2009 | 2002 Toyota Highlander

1 Answer

Front Washer fluid not spraying in 1999 Dodge Caravan Sport


front pump motor may have come out of washer bottle it is only held in by the seal no bolts

Jul 27, 2009 | 1999 Dodge Caravan

1 Answer

Low Washer Fluid


The fluid refill is right in front of your battery and supplies fluid to both windshield and rear glass as well.

Mar 31, 2009 | 2005 GMC Yukon Denali

3 Answers

2005 Malibu Maxx, rear windshield washer problem


Mine had this problem it was the motor on the fluid tank front driver right behind the bumper too the headlight out and there it was had to syphon all the fluid out its a 2 way motor so your front might work but the back wont

Mar 22, 2009 | 2006 Chevrolet Malibu Maxx

1 Answer

2005 chevy equinox, washer motor working but no fluid is coming out to either front or back


hiya
it uses one washer fluid tank in the engine area that provide fluid for front/rear windows.
you could pull the rubber hose off at the bottom as a first check to ensure the washer pump does function to shoot fluid from the washer fluid tank.
if there's fluid still in it, look inside to ensure no forgein/gunk object is plugging the bottom inside.
check the washer fluid tank in the engine area and see if the rubber hose is still connected to it?
also check for no kinked or pinched point along the hose...just follow the hose to see it's not compressed flat which could be the cause of restricted washer fluid movement.

Feb 23, 2009 | 2005 Chevrolet Equinox

1 Answer

Front widshield washer fromm 1999 Cherokee doesn't work


Your rear bottle for the wipers should be at the back of the vehicle.Look in back for removable panel and bottle should be there.Turn your ignition on(no start)and activate rear washer Listen for the sound of the motor

Nov 20, 2008 | 2000 Jeep Cherokee

1 Answer

Please help!!!


You should have a crush washer on each side of the banjo bolt. You may be loosing your pressure to everything else by all the brake fluid leaking. You may have to go through the motions a few times before you see the fluid come out of the rear.

Jul 03, 2008 | 2000 GMC Jimmy

Not finding what you are looking for?
1997 Jeep Cherokee Country Logo

139 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

68970 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22026 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6817 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...