Question about Mercury Grand Marquis

1 Answer

Hit a deer with my 1996 mercury grand marquis. the signal and flasher lights quit working.

Posted by on

  • oneputtjo Dec 24, 2008

    turn signal lights do not show on dash but fuses look ok.

  • oneputtjo Dec 28, 2008

    I found out how to fix this. As unbelievable as this sounds, I read that a gentleman had fixed this problem by spraying wd-40 around the flasher button and pushing it in and out a couple of times. This worked and it is fixed.

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 121 Answers

Check for broken Lamp near the point of impact If the light comes on on dash but doesn't flash. If dead check the fuse for turn indicator lamps can be found in the owners manual

Posted on Dec 23, 2008

  • jdtech Dec 26, 2008

    You need to check the fuse that supplies the turn signals for voltage using a 12 volt test light or meter( be sure to check both sides) If one side has power and the other doesn't the fuse is bad. Also check the flasher located in or near the fuse panel under the dash. If this doesn't work,You will need a shop manual with a wiring diagram and the know how to preform electrical circuit analysis.

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Wher is the Flasher Relay on a Mercury Grand Marquis 2005


It is built into the flasher. The button you push. If it is in the dash, replace it. If it is in the steering column, replace the turn signal switch.

Aug 05, 2016 | 2005 Mercury Grand Marquis GS

1 Answer

Flasher relay in a 98 mercury grand marquis?


The fuse block the relay is located in is behind the knee bolster, the trim panel under the steering column, left of the steering column underneath the dash. Common source of problems if that does not fix it is the Light Control Module ( LCM), turn signal switch unit, headlight switch.

Mar 08, 2013 | Mercury Grand Marquis Cars & Trucks

1 Answer

No turn signals on 98 grand marquis


I would check for power at the fuse then at the turn signal switch.

Jul 25, 2012 | 1998 Mercury Grand Marquis

2 Answers

Brake lights and turn signals quit working


The first thing to do is check the fuses, the fuse may have blown, maybe to a short or bad bulb, start with the fuses and also make sure the 4way hazard lights switch is off.

Jun 26, 2010 | 1995 Mercury Grand Marquis

1 Answer

Turn signal


U need to replaced the flasher relay.

Apr 21, 2010 | 1996 Mercury Grand Marquis

1 Answer

Stop and TS problem


there is a flasher
.the hazard is wired to constant power so it works with the ignition off.
the turn signal works off of a switched power,to the turn switch and either the right or left turn signal.
if a bulb burns out,the light stays on steady

Jan 29, 2010 | 1998 Mercury Grand Marquis

3 Answers

Turn signal don't work or the flashers?


If you still have flasher problems, I read on Google to spray WD-40 down in and around the hazzard flasher button, then press it up and down several times...and BINGO...all flashers and signals worked again....just had some dirt and dust in the wiring....

Jan 24, 2009 | 1997 Mercury Grand Marquis

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

111 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mercury Experts

yadayada
yadayada

Level 3 Expert

61168 Answers

Fordexpert

Level 3 Expert

5331 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Are you a Mercury Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...