Question about 2001 Lexus Gs 300

Open Question

How to replace wheel bearings on lexus 2000 gs300

Just look for a link on how to replace front wheel bearings. i have had two fail after replacing 3-6 months ago. supposely just remove hub and have new bearings pressed in. now i read there is a bolt that needs to be tighten to a certain torque or they will prematurely fail. please let me know procedure. thanks, brian.

Posted by on

5 Suggested Answers

  • 45 Answers

SOURCE: need torque setting for front hub nut on a mark 3 golf vr6

195 ft-lbs I verified this in the Volkswagen repair manual aka the vdubbers bible

Posted on Mar 24, 2009

  • 1 Answer

SOURCE: Torque specs for front wheel hub nut

112 to 174 ft lbs

Posted on Apr 04, 2009

  • 72 Answers

SOURCE: Front Hub Bearing Torque specs to complete replacement

THE LUG NUT TORQUE SPEC - 140FT/LBS\
CALIPER MOUNT - 80FT/LBS
CALIPER BRACKET 129FT/LBS
AXLE NUT 177FT/LBS

Posted on May 09, 2009

  • 15 Answers

SOURCE: VW Jetta torque setting and hub nut size????

129 ft/lbs. Per Bentley...I'm pretty sure it's a 30 mm 12 point socket.

Posted on Jun 01, 2009

  • 11 Answers

SOURCE: 1999 GMC safari AWD mini van hub /bearing

try this link:
http://www.edmunds.com/used/1999/gmc/safari/11196/specs.html

Posted on Sep 11, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I remove headlight assembly on a 1993 gs300


The Lexus GS300 is a midsized luxury sports sedanicon1.png made by the Lexus arm of Toyota. While the vehicle is designed with a good fit and finish, the components are not indestructible. If the headlight on your Lexus GS300 needs to be replaced, you can purchase replacement parts from a Lexus dealer or from most auto parts stores. Unlike most vehicles, it is not obvious just by looking at it how to remove the headlight, so you will need to know the proper procedure to avoid damaging the headlight assembly

Sep 28, 2014 | Cars & Trucks

1 Answer

How to replace front wheel bearing?


old post, but you are first to say front. many others fail to say end of car.

is your car 4wd, as 2wd is different rules. so...??????

I toss coin land on 4WD.

2000 front wheel bearing

got it.

the 2000 year, is important.

this year is the last year, before non untized hubs.

http://www.fixkick.com/hubs/FW_BEARINGS.html#newer



my posts is for stock cars. only, and USA spec, cars.

other countries, evolve this in different years.



2000 (never 2001+)

fsm quotes



  1. Before servicing the vehicle, refer to the Precautions section.


  2. Remove or disconnect the following:



    • Front wheel


    • Brake caliper and rotor


    • Locking hub or hub drive flange, if equipped,(it is)


    • Hub grease cap, if equipped


    • Wheel speed sensor, if equipped (ABS)


    • Wheel bearing lockwasher


    • Wheel bearing locknut (ring) and inner washer


    • Wheel hub and bearing assembly (slide hammer?)


    • Wheel hub oil seal


    • Wheel bearing oil seal


    • Snapring




  3. Press the wheel bearing and race out of the hub.


reverse is same but the lock ring must be set

to 123-180PSI. stop tightening above 123 at first alignment hole in lock ring..

Jun 26, 2014 | 2000 Suzuki Grand Vitara

1 Answer

My 1994 lexus gs300 sunroof, gear shift , and heat and air don't work. i checked the fuses and there good....the 3 and 4 fuse are not lighting up when i test them


try the 100 amp fusable link located in the power distrubition center under the hood , i had a similar problem and
that fixed it good luck

Mar 07, 2013 | 1994 Lexus GS 300

1 Answer

Front wheel assembly diagram


For front wheel assembly diagram and replacement,click the link below and go through procedure:----Front wheel hub assembly Diagram and replacing procedure? http://howtobyme.blogspot.in/2012/02/front-wheel-hub-assembly-diagram-and.html
----------Front wheel assembly diagram to replace wheel bearing? http://howtobyme.blogspot.in/2012/02/front-wheel-assembly-diagram-to-replace.html
-------------How to replace Front wheel bearing? http://howtobyme.blogspot.in/2012/02/how-to-replace-front-wheel-bearing.html
-----------Check all 3 links one by one.This will help.Thanks.

Feb 22, 2012 | Ford F-250 Cars & Trucks

1 Answer

06 gs300 awd left front 'howls' turning to the right. is it bearing? cv/axle?? degree of difficulty for week end warrior to replace??


Mostly bearing. Check this by lifting the wheel and grabbing the top and bottom of the tire. Any movement in and out is the bearing. Rarely does an axle make noise, but they do vibrate. Sounds like you may already work on your cars , so this job should be OK for you to do. Best parts to remove are the axle, tierod end, and strut. This will make it easier for you to remove the bearing. If your car has the bearing pressed in then you have to remove the lower ball joit also. You will have to take it to a shop and have it pressed out and back in. Usually around $30.00, if you take a bearing with you, which I suggest.

Sep 07, 2011 | 2006 Lexus Gs 300

1 Answer

2000 Lexus GS300 has whining, vibration from power steering pump


if the pumps is goignng no way!! just use the 125 towards the new pump

Aug 31, 2009 | 1993 Lexus Ls 400

2 Answers

Replace Front Bearing 1996 Lexus GS300


the way you did the installation on a camry is the same way on a lexus there both F W D and similar parts when you work on it you'll see it the same.

Jul 26, 2009 | 1996 Lexus GS 300

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

733 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lexus Experts

yadayada
yadayada

Level 3 Expert

70387 Answers

ROBERT GARCIA
ROBERT GARCIA

Level 3 Expert

624 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Are you a Lexus Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...