Question about 1988 Ford Crown Victoria

1 Answer

I have a 95 Crown Victoria. The brake lights and blinkers are not working, and not sure which fuse it is. I do not have a manual for the car. I have pulled all of the colored fuses, and I think the problem is in one of the other two metal fuses. Trying to find which one will do the trick.

Posted by on

  • 2 more comments 
  • leemidnight Dec 31, 2008

    i have a crown vic also no blinkers or brake lights 1996 pls can someone help me solve this problem its driven my bf nuts lol

  • mkstratt Jan 08, 2009

    95 crown vic with no brake lights or turn signals, fuses are all good and bulbs are also fine

  • Anonymous Jan 13, 2009

    my display panel and parking lights went out and all the fuses are good

  • Anonymous Apr 02, 2009

    I have a 95 Crown Victoria. The brake lights and blinkers are not working, and not sure which fuse it is. I do not have a manual for the car. I have pulled all of the colored fuses, and I think the problem is in one of the other two metal fuses. Trying to find which one will do the trick.

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 8 Answers

Try replacing turn signal fuse or switch its the metal or alumium fuse cost less than $5.00 bucks if this works please let me know,thanks

Posted on Apr 19, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is brake light fuse for cron vic 2008 ?


The location of the fuse panels should be in the owners manual.
Look under the dash on the drivers side as well as the side wall in front of the door. Some cars have another fuse panel in the engine bay.

Jul 21, 2014 | 2008 Ford Crown Victoria

1 Answer

97 crown victoria, headlights, blinkers, brake lights and emergency flashers quit all at once


May be your multi function switch( directional switch),possibly a bad fuse,a LCM (lighting control module,a black box by the gas pedal,or maybe a plug pulled out of the module for some reason.

Oct 26, 2013 | 1997 Ford Crown Victoria

1 Answer

Brake lights don't work on 95 crown victoria


Battery power is applied through 15A fuse 1 in the I/P fuse panel. It passes through the brake on/off switch and is routed through the multi-function switch to the stop lamps. When the brake on/off switch is closed, the stop lamps light. Possible failures include the fuse, the brake on/off switch, the multi-function switch, and the filaments of the multi-purpose rear lights.

Sep 08, 2012 | 1995 Ford Crown Victoria

1 Answer

Brake light wont work on police interceptor 2004 victoria


First check fuse for brake light with test light if fuse is good test brake light switch under dash with test light if you dont understand how to do the above contact me at Ken17402@msn.com title the message crown vic problem

Nov 15, 2010 | 2004 Ford Crown Victoria

1 Answer

No tail lights


check tail light fuse, under TAIL

Jul 05, 2010 | 1993 Ford Crown Victoria

1 Answer

I have a 1987 crown victoria and like a ******** i cut the wire while my blinker light was on and i don't know which fuse is the blinker and auxilary lights is so if anyone knows how many amps it is or...


if you have a test light turn the key on and probe both sides of each fuse. the one with power to one side is the blown one. probably a 20 or 25amp

Jan 17, 2010 | 1987 Ford Crown Victoria

1 Answer

Turn signals stop working , everything else is ok, which fuse is for turn signals on ford crown victoria 2002 p71.


IT IS PROBABLY THE MULTI FUNCTION SWITCH ..THAT IS WHAT YOU USE TO TURN THE BLINKERS ON..TRY TURNING ON YOUR EMRGENCY BLINKER BUTTON AND IF THEY WORK THAT WAY IT IS NOT THE FUSE...THE MULTI FUNCTION SWITCHES ARE PRONE TO FAILURE...

Jul 09, 2009 | 2002 Ford Crown Victoria

1 Answer

Brake lights not working


Check the fuses, and check the brake light switch, which is usually found up under the dashboard attached to the pedal arm. Make sure the connector in OK, the switch activates with the movement of the pedal. failing that replace the switch.

Hope this is of some assistance.
Ed

Apr 20, 2009 | 1989 Ford Crown Victoria

2 Answers

1992 crown vic blinkers stopped working


It can be wiring connections, try to check the wiring coming to the blinkers.

Dec 02, 2008 | 1992 Ford Crown Victoria

1 Answer

Tail lights not working while drive. brake,blinkers work


i have a crown victoria with brake lights no tail lights could you help me?

Nov 19, 2008 | 1989 Ford Crown Victoria

Not finding what you are looking for?
Cars & Trucks Logo

181 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

61037 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Fordexpert

Level 3 Expert

5331 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...