Question about 2005 Jeep Grand Cherokee

1 Answer

I have a 2005 jeep grand Cherokee and when i turn the steering wheel it makes a clicking noise i believe it may be the turn signal stick that is rubbing up against the steering, also when i lock and unlock my car with my keys the alarm will go off out of nowhere

Posted by on

  • Anonymous Feb 11, 2009

    same prob on mine

  • Tony2005 Mar 13, 2009

    Same problem here with my 2005 Limited

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 475 Answers

The clicking noise is coming from the clock spring in the steering column. The clock spring is the connection between the air bag and lower harness. It should be replaced by a certified technician.

Posted on Dec 23, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to replace turn-signal switch


you will need to take the steering wheel off, and the surrounding collar and then remove the internal element below the collar, then remove then disconnect electrical within column, then removed signal light apparatus (disconnect battery before removing steering wheel) . If you have not done this before you will need some specific tools.

Jun 30, 2014 | 2005 Jeep Grand Cherokee

1 Answer

My 2002 jeep grand Cherokee steering wheel makes a groweling noise when turning lock to lock


Could be the power steering pump or the steering gear(rack and pinion)

Oct 18, 2013 | 2002 Jeep Grand Cherokee

1 Answer

2004 Jeep Grand Cherokee Limited makes rear noise when turning left?


Could be low on oil, or need a shot of additive if it is a limited slip differential.
The noise may be the clutches in the diff or one of the axle bearings.

Jul 26, 2012 | 2004 Jeep Grand Cherokee

1 Answer

2005 Grand Cherokee grinding


The Wheel Bearing(s) need to be replaced. They should be bolt-on assembly and are bolted from the back of the steering knuckle. It is easy to remove and replace. Buy your bearing assembly(ies) from an auto parts store versus the dealer to save you a lot of money.

Dec 23, 2009 | 2005 Jeep Grand Cherokee

1 Answer

2003 grand cherokee steering column noise


check the universal joint on the bottom of the steering collum, put one hand ether side of it an twist see if there is any play in it you can also see if it is stiff/seized these will both cause a noise

Oct 01, 2009 | Jeep Grand Cherokee Cars & Trucks

1 Answer

I have a 2005 Jeep GC the controls for the radio behind the steering wheel do not work. I have brought it to the dealer but the repair only lasts for a short period.


the controls for radio in the steering wheel run through the clockspring i believe this is your problem and needs to be replaced

Aug 11, 2009 | 1999 Jeep Grand Cherokee

1 Answer

2002 grand cherokee laredo humming/grinding


sounds like you have a problem with one of your lines on your power steering or one of its components. the grinding noise could also be one of your pulleys that have gone bad too. check your steering assemby gear box.

Jul 26, 2009 | 2002 Jeep Grand Cherokee

1 Answer

Power steering went out and making a loud noise when turning.


yes power steering is most likely very low , repair leak , as the fluid is flameable

Feb 27, 2009 | 2000 Jeep Grand Cherokee

1 Answer

Jeep Grand Cherokee 2004 front end clunking


It would be kind of hard to explain, but you may want to check your wheel bearings. Sounds like your wheel is binding. If you jack the front up, grab your tire, and shake. Sort of like you are trying to turn the wheel your self with out the steering wheel. Then do the same up and down. If you have a lot of play, then your wheel bearing is shot. And with a 4WD, you have to replace it because its sealed, where as on a 2WD, you can tighten them. For the pitman arm, and the gear box, you may have to get a haynes manual to find. But the gear box will be the box that your steering shaft goes into and connects to the tierods. Not too hard to find.

Feb 13, 2009 | 2004 Jeep Grand Cherokee

1 Answer

High Pitch Noise in 2000 Jeep Grand Cherokee limited


Check your power steering fluid level, and system for leaks. May be a bad p/s pump as well. Hope this helps

Nov 29, 2008 | 2000 Jeep Grand Cherokee

Not finding what you are looking for?
2005 Jeep Grand Cherokee Logo

865 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

60541 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21927 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...