2007 Dodge Caliber SXT Sport Hatchback Logo
gabriel garcia Posted on Sep 03, 2012

Caliber 07 air bag system light is coming on

The problem was repeir but i need to reset air bag system

1 Answer

A

Anonymous

The problem wasn't repaired if the light is on

3 Related Answers

Anonymous

  • 1 Answer
  • Posted on Nov 01, 2009

SOURCE: need instuctions to change tail/break lights on 07 dodge caliber

popohead, if people thought it was easy, they wouldn't be here asking. Your reply is useless.

To remove the pins, look a them closely. Notice that there's two little notches cut into the cup that holds the pin. Use a flathead on each side to leveredge them out a little. If that doesn't work at all, you can use a pair of pliers to firmly grip the head of the pin and pull straight out. Quick firm pull.

Once the first pin comes out, the second pin should easily come out. At that point, firmly grip your taillight housing, and pull straight back: Don't try to wiggle it out, and don't try to lift it to one side or the other like a trunk or door. Just pull it firmly straight back like you would a dresser drawer.

Once it's out, the little wiring harnesses come out of the taillight housing with about a 1/4 turn, and the bulbs just slide straight out of those.

Good luck!

Ad

Anonymous

  • 512 Answers
  • Posted on Jan 25, 2009

SOURCE: 2007 Jeep Wrangler airbag light and chime

there is no other option...as long as the light is on there is a chance the airbag will either not work in an accident or it may deploy without warning. how many miles do you have on the vehicle??? there is a chance if you contact chrysler customer relations they may assist in the repairs.

raj somaiya

  • 5370 Answers
  • Posted on Jul 27, 2011

SOURCE: 07 caliber.cranks and idles. won't come out of

First try this.turn the key to on position in ignition and then press the brake pedal and see if brake lights coming ON,.If the brake light is not coming on then problem is faulty brake light switch.A very common problem for Dodge on this issue is the Brake Light Switch. It has three internal switches controlling various functions of the vehicle. It's main function is to control operation of the vehicle's brake lamps. Other functions include speed control deactivation, brake sense for the antilock brake system and brake sense for the brake transmission shift interlock. This switch is located at the top of the brake pedal arm, under the driver's side dash.

Replace the switch.------------ But if brake light is coming On, then check the fuse.--------- check fuse #14 in the fuse box under the hood and to the left side of the engine compartment. If it is blown replace it and see if the car will now shift out of park.
---------- To see the brake light switch location diagram for your car.click the link below:--- http://technoanswers.blogspot.com/2011/07/where-is-brake-light-switch-located-on.html ------------ This will help.Thanks.Helpmech.

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

RESET BLINKING AIR BAG LIGHT NISSAN ALMERA 1.6

Can't -- it will just come back

The air bag is turned off for now,
until you check for SRS System Codes,
& make the required system repairs

Not read your owners manual or studied
OBD Vehicle Systems?
0helpful
1answer

The engine light it on, also passenger air bag light it on

And the question is what?

You got dash lights on
You got system problems
You got codes to check & look up

Nothing new there, just because the air
bag is involved
0helpful
1answer

07 dodge caliber throttle control

Usually replacing the TPS - throttle position sensor will get rid of this issue.
0helpful
1answer

07 Dodge Caliber, ETC light

Try replacing the TPS first, then if your light doesn't go off, take it to the dealer.
0helpful
1answer

Turn off airbag light

Air bag lights self reset you still have a existing problem during the self test it has detected a open/shorted circuit disabling the system. watch your air bag light then turn key on do not start engine lamp comes on then goes out and then comes back on again. this is the start up initialization of the system and sensor or wiring does not pass the system goes fail safe. with a scanner the air bag code can be read thru the OBDii connector if having hyundai body control software.
3helpful
1answer

07 colbalt seat belts locked

Reset the system by detaching the positive end of the battery terminal in the trunk.
0helpful
1answer

On my 07 dodge caliber a lightening bolt appeared between 2 lines and the check engine light came on but everything ran fine. Please advise. Thank you

Have a repair shop check for codes every time
any light comes on your dash

Then you know if any systems have a fault & if you
should continue to use it prior to repairs
1helpful
1answer

How to reset air bag on dodge caliber 07

the air bag light resets it self if the failure is fixed so make sure the connector you removed is plugged back in all the way
0helpful
1answer
1helpful
4answers

How do I disconnect the air bag light? How do I take out bulb?

u dont as tneubauer and emissionwis state dangerous to be fooling around with airbag system if light on have vehicle scanned some auto store such as auto zone / advanced auto scan for free the code can give u a place to start -but unless ur a tech who has dealt with air bags dont mess around with connections or even dash -bring to auto tech or dealer for repairs-- with light on driving can be hazardous because bag or bags can deploy
Not finding what you are looking for?

681 views

Ask a Question

Usually answered in minutes!

Top Dodge Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...