Question about 1990 Oldsmobile Cutlass Calais
Reverse Gear in your transmission has gone out. You need to have it rebuilt.
Posted on Sep 02, 2009
If it acts like neutral in reverse, the low/rev band is likely broken. I've seen it before. If everything is good forward. Pulling trans is the only way to fix it
Posted on Apr 03, 2009
this is always caused by a failed/worn out reverse clutch pack, you must remove the trans and have it overhauled to correct this failure.
Posted on Apr 18, 2009
Unfortunately it sounds like you have some internal transmission damage. When reverse wont function in your vehicle, it is fairly common that the reverse clutch plate in the transmission ha sworn the teeth off the gear. Once you have the transmission fixed, make sure you come to a complete stop when backing up before going forward. That is usually the action that will cause the theeth to wear off the clutch plate
Posted on Dec 13, 2009
SOURCE: 1999 ford explorer no reverse
The first thing to go in a transmission is usually reverse. Find the cheapest place to have it rebuilt before the rest goes. Alternatly you can try to replace the transmission filter. Fords usually have a 12 bolt tranny pan and the kit comes with filter and new gasket. Also, u may lose a few quarts of fliud after you remove the pan.
Posted on Jan 09, 2010
DIsconnext and reconnect the linkage at the transmission. You may want top replace the linkage cable all together. Make sure you set the parking break and block the tires
Posted on Apr 14, 2010
Tips for a great answer:
Jan 20, 2014 | 1999 Ford Explorer
Jan 06, 2011 | 1999 Ford Explorer
Apr 14, 2010 | 1999 Ford Explorer
Jan 09, 2010 | 1999 Ford Explorer
Apr 18, 2009 | 1999 Ford Explorer
Apr 02, 2009 | 1999 Ford Explorer
Mar 18, 2009 | 1999 Ford Explorer
Aug 10, 2008 | 1999 Ford Explorer
Apr 12, 2014 | 1990 Oldsmobile Cutlass Calais
210 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: