Question about 1989 Chevrolet G20
I have a 1989 g20 van that keeps stalling.It will run for awhile then
stalls and wont start,after a few minutes it will start again.I've
tested the fuel pressure by cranking the engine for 15 seconds and got
over a pint of fuel.I had the ignition module tested and it passed.I
disconnected the knock sensor to see if maybe that was it but it did
the same thing.the fuel pump is a little over a year old.recently
replaced the plugs and wires.rotor,cap and the coil.also put injector
cleaner in the fuel.Also I pulled the tank out and tested the fuel pump and it passed.Any Ideas would be GREAT
To replicate running condition with module,test module while heating it with a hair dryer or heat gun,if module is bad when engine is warm,it will show up using this method
Posted on Jan 18, 2009
Normally on chevy ignition modules when they go bad, they will quit when they get hot & after cooling down will work again, so when you have them tested they have cooled down. I would try changing it & see if it wont fix it.
Posted on Dec 28, 2008
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Tips for a great answer:
Oct 12, 2014 | 1991 Ford F150
Aug 22, 2017 | Cars & Trucks
Apr 16, 2017 | 1992 Chevrolet G20
To Order car parts online:--To get heavy
discount on car parts .Click this link below:----
This will help.Thanks.Helpmech.
Jun 14, 2011 | 1994 Chevrolet C1500
Jul 17, 2009 | 1989 Cadillac Sedan DeVille
732 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: