Question about 2006 Mazda 3

Open Question

Mazda3 display problem

Hello. I see you've solved the Mazda3 information display problem. I'd greatly appreciate instructions on how to replace this unit. My car's still under warranty, but if I can do this cheaply and easily myself, I'd rather not have the hassle of taking the car to the dealer. Thanks!

Posted by on

  • klubsellerz Mar 04, 2009

    Hi, once in a while when i start my 07 mazda 3 the info display goes whacky, the airbag light stays on, the brake light stays on, the turn signals and high beam indicator and outside temperature display won't work.. pull over and restart car and it works great.. ghost in the machine! any ideas? thanks a ton!

  • Albert 777 May 11, 2010

    what is your problem with your mazda?

×

3 Suggested Answers

  • 11 Answers

SOURCE: 06 mazda3 keyless remote programming instructions

It should be hit the unlock button 3 times, open and close the door 3 times, the locks will operate themselves twice. Hit the unlock button on the remote and it should program. you should try a remote from the dealer not from ebay.

Posted on Dec 18, 2008

  • 2 Answers

SOURCE: Mazda 3 Information Display

This really works...the fuse that controls the Information display power is the one labelled "ROOM" (15Amp). It is located under the hood in the engine fuses.

I didnt even replace mine, I simply scraped off the dirt/rust from the metal portion and reinserted it. If this doesnt work, test the ROOM port with a functional fuse switch (I used the one labelled HORN, 15amp). If it works with the switch, you have a good part, but need a new fuse.

Free solution to an expensive problem...if you dont know whats wrong.

Posted on Feb 15, 2009

  • 484 Answers

SOURCE: Clutch calibration on a manual shift 2004 Mazda3

i'm not sure what you mean, "calibrating the clutch". Is the pedal sinking to the floor or not engaging the clutch well? If it seems spongy, there may be air in the line and it will need to be bled. If it does not engage well at all, check your clutch master cylinder for proper level of fluid in the reservoir or any fluid leaking out, the hose for leaks and the slave cylinder for any leaks. If they are, then whatever part was bad will need replacement.

Hope this is a little help,
matt

Posted on Sep 17, 2009

Testimonial: "Thanks, I was thinking of aclibrating becasue I though about the old wire clutches. This is not a wire clutch. Thanks"

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Mazda3 Immobiliser


yes i can surely help you for this.
this is the link to help you for any type of car problems

for car regarding questions:
http://en.allexperts.com/q/Buick-Olds-773/Ignition-tumbler-replacement.htm

best site for reparing cars
http://www.ptdoityourself.net/tl/tl_indexmain.html

feel free 4 further assistance .rate the particular experts solution as fixya that helps u understand n solve ur problem

Jun 29, 2008 | 2004 Mazda 3

1 Answer

Battery will not hold charge


have you checked your silonoids

Jul 05, 2013 | Kia Spectra Cars & Trucks

1 Answer

I'm having a problem locating, for replacement, the horn for a Mazda3 2007. If there is a picture or diagram available, that would be great! If not, an explanation as detailed as possible would be...


You know I do not have a Mazda in front of me but I have always found horns just behind the front grille, next to the radiator, more or less under the light assemblies.

Dec 02, 2010 | Mazda MAZDA3 Cars & Trucks

1 Answer

Clutch calibration on a manual shift 2004 Mazda3


i'm not sure what you mean, "calibrating the clutch". Is the pedal sinking to the floor or not engaging the clutch well? If it seems spongy, there may be air in the line and it will need to be bled. If it does not engage well at all, check your clutch master cylinder for proper level of fluid in the reservoir or any fluid leaking out, the hose for leaks and the slave cylinder for any leaks. If they are, then whatever part was bad will need replacement.

Hope this is a little help,
matt

Sep 17, 2009 | 2004 Mazda 3

1 Answer

2004 mazda3 trans. problem will not change 3rd to 4th gear


Thankyou anyway, problem already solved

Apr 14, 2009 | 2005 Mazda 3

3 Answers

Cambry 94 stereo code


The unlock code for the 11712 audio unit is as follows:

6 4 0 7 0 2

A FixYa rating for my assistance would be greatly appreciated.

Dec 23, 2008 | 1994 Toyota Camry

12 Answers

Mazda 3 Information Display


This really works...the fuse that controls the Information display power is the one labelled "ROOM" (15Amp). It is located under the hood in the engine fuses.

I didnt even replace mine, I simply scraped off the dirt/rust from the metal portion and reinserted it. If this doesnt work, test the ROOM port with a functional fuse switch (I used the one labelled HORN, 15amp). If it works with the switch, you have a good part, but need a new fuse.

Free solution to an expensive problem...if you dont know whats wrong.

Dec 18, 2008 | 2006 Mazda 3

2 Answers

06 mazda3 keyless remote programming instructions


It should be hit the unlock button 3 times, open and close the door 3 times, the locks will operate themselves twice. Hit the unlock button on the remote and it should program. you should try a remote from the dealer not from ebay.

Sep 20, 2008 | 2006 Mazda MazdaSpeed

Not finding what you are looking for?
2006 Mazda 3 Logo

Related Topics:

199 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mazda Experts

yadayada
yadayada

Level 3 Expert

64034 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21990 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...