Question about 2000 Ford F150 Flareside SuperCab

1 Answer

Brake lights work sometimes new brake switch did not help

Sometimes brake lights work & sometimes they don't.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Guru:

    An expert who has written 7 tips or uploaded 3 video tips

  • Master
  • 449 Answers

Check the brakes light switch.

Posted on Dec 23, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Brake and tailgate sometimes works


Since tail lights are not part of the brake switch, I wouldn't think so. This sounds more like a bad fuse or some other fault. Do either of the turn signals work? Are the turn signals a part of the brake lights or are they independent?

Jul 07, 2013 | 1993 Jeep Grand Cherokee

1 Answer

1997 k1500 brake lights and turn signals don't


Do you have power going into the turn signal switch from the brake switch, and then coming out to go to the lights ?

Jun 23, 2013 | Cars & Trucks

2 Answers

1994 dodge dakota my headlights and tail lights and brake lights don't work my abs and parking brake lights are on my dash lights don't work either I replaced the headlight switch and still no


These are all different circuits. The brake lights are on a 10amp fuse - the headlights are on a 50amp fuse - and the parking and dash lights are on a 20amp fuse.
Do you have power going into the headlight switch and the brake light switch ?

Jan 29, 2013 | Cars & Trucks

1 Answer

The marker lights, brake lights,dash lights,power windows,power locks,radio and heater dont work


When you release the brake pedal, there is a switch underneath the brake pedal that disconnects the circuit to your brake lights causing your brake lights to switch off. Sometimes this brake light switch will go bad and need replacement. If your brake light stays on after you turn your car or truck off and you don't want to run your battery down, you may be able to get down underneath the brake pedal and manually pull up on the brake light switch to deactivate it until you can get it repaired.
and i think you can make a diagnostic by yourself and the Autel MaxiDAS DS708 can help you

Oct 23, 2012 | 1985 Oldsmobile Cutlass Supreme

1 Answer

I have a 1993 honda accord i just recently lost my brake lights i put in a new brake light switch and all of my brake lights started working except my right brake lights? please help


If you don't have power to the right brake light when the switch is engaged, I would check the turn signal switch. On some models the brake circuit goes thru the turn signal switch. Also be sure and check the ground connection on the bulb socket.

Aug 25, 2012 | 1993 Honda Accord

2 Answers

Cruise control not working


You probably should have someone look at the truck.
The brake light switch is mounted near the brake pedal but you could have a host of other problems.

Jun 29, 2012 | 2007 Chevrolet Suburban Three-Quarter-Ton...

2 Answers

My breaks light stay on even if my car is not running???


Hi Chris....When you release the brake pedal, there is a switch underneath the brake pedal that disconnects the circuit to your brake lights causing your brake lights to switch off. Sometimes this brake light switch will go bad and need replacement. For the most part, replacing the brake light switch is very simple. Simply replace the brake light switch with a new one. If your brake light stays on after you turn your car off and you don't want to run your battery down, you may be able to get down underneath the brake pedal and manually pull up on the brake light switch to deactivate it until you can get it repaired. This method will only work if the brake light switch is just sticking.

I hope this helps FixYa!

Aug 25, 2011 | 1992 Buick Regal

1 Answer

I have brakes, but my brake lights don't work. I changed the brake light switch and the brake lights still don't work, I also have a brake switch relay. Could that be the problem, and where does it...


does the high mounted stop light work? if so, the turn signal switch may be bad. the brake light signal runs through the brake light switch, there was a recall 08V231000 for some of these models, call the dealer and have them check if there is an OPEN RECALL on your truck. . as for the hard starting, check fuel pressure , if its not at least 60psi, it needs a new fuel pump and filter.

Aug 03, 2011 | 2002 Chevrolet Blazer

1 Answer

Does the brake light switch must be in the place from which it came in order for the brake lights to work? I replaced the switch but I colud not find the hookup from where it came. I have it plugged up but...


Yes it has to be mounted in the bracket so when you push the brake pedal it works the switch to operate the lights. They are sometimes hard to get to but there should be a bracket under the dash around the pedal arm that the switch goes into

Jun 22, 2011 | 1998 Chevrolet S-10 Pickup

2 Answers

Solving tail light problem


tail lights not working did the right thing in checking the obvious so what you need to do is find your brake light switch which is on the brake pedal [top] take the the connector off get a spilt pin or something that will by-pass the switch connect together if these brake lights only work with ignition on don,t forget to switch it on your brake lights should come on if so replace the switch

Sep 28, 2008 | 2004 Kia Sorento

Not finding what you are looking for?
2000 Ford F150 Flareside SuperCab Logo

Related Topics:

62 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

60769 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Fordexpert

Level 3 Expert

5331 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...