Question about 1995 Mercury Cougar

1 Answer

I cannot get the door panel off of my 1994 cougar whats the probl

Need help cant get the door panel off

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 1,986 Answers

You'll need to remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. If needed, you can pull back the weather seal (can't reuse it, but it's not that important) and you will be able to access everything inside the door

Posted on Aug 14, 2009

  • b_beeley
    b_beeley Jun 06, 2012

    This helped me deal with my 1996 Mercury Cougar. Everything the same with that model year. Thanks, so much. Oshbeg

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

97 mercury cougar xr7 how do i get door panel off if I cant open door?


It should still be possible, using a little bit of force. all screws and bolts holding on the panel are accessible, even with the door closed...but the panel maybe slightly pinched on the front and rear ends, and possibly on the bottom...but pulling hard on the handle once every bolt and screw is removed should force the panel loose

Apr 18, 2014 | 1997 Mercury Cougar XR7

1 Answer

Door window motor runs in both directions but window does not move. removed the door panel but need help to proceed


There is a motor at the bottom of the door that is attached to a guide that runs the window up and down..You have a broken guide with a little time and patience you can replace it

Jun 10, 2011 | 1994 Mercury Cougar

2 Answers

Fuel filter 1994 cougar


on the rear of car close to fuel tank

Apr 04, 2010 | 1994 Mercury Cougar

1 Answer

How to remove a door panel on a 95 Mercury Cougar


find any screws and take them out first then u want to slide the panel upwards until it releases

Jul 31, 2009 | 1994 Mercury Cougar

1 Answer

Need to remove drivers door panel


please rate if this helps. Section 01-05: Trim, Interior 1995 Thunderbird, Cougar Workshop Manual REMOVAL AND INSTALLATION The interior trim component Removal and Installation procedures generally apply to all models. If some of the steps do not apply to the particular models being serviced, proceed to the next step. Trim Panels, Door Removal and Installation
  1. ssd~us~en~file=ani_caut.gif~gen~ref.gif CAUTION: Do not pry front door trim panel (23942). Prying on front door trim panel will break the hook retainers.
    Disconnect battery ground cable (14301) .
  1. Carefully pull front door trim panel finish panel (23712) away from front door trim panel .



    9e3f506.gif
Item Part Number Description 1 23713 Front Door Trim Panel Finish Panel 2 17B676 Outside Rear View Mirror Control 3 14028 Door Lock Switch 4 55928-S55 Screw (5 Req'd) 5 14529 Window Regulator Control Switch 6 23942 Front Door Trim Panel
  1. Disconnect wires from front door lock switches (14017), outside rear view mirror controls (17B676) and window regulator control switches (14529) , if equipped; remove front door trim panel finish panel.
  1. Remove front door trim panel retaining screw through front door trim panel finish panel opening.

    Trim Panels, Door


    83b257f.gif


    Item Part Number Description 1 20124 Front Door 2 23942 Front Door Trim Panel 3 383356-S100 Nut (2 Req'd Each Side) 4 56903-S58 Screw (2 Req'd Each Side)
  1. Remove interior lamp lens cover.
  1. Remove screw through interior lamp opening.
  1. Slide front door trim panel upward to disengage hooks.
  1. Rotate top of front door trim panel away from front door (20125) , and lift bottom hooks from front door.
  1. Disconnect window regulator jumper wire (14A630) .
  1. Remove front door trim panel.
  1. To install, reverse Removal procedure.

May 07, 2009 | 1994 Mercury Cougar

1 Answer

UNLOCK CODE 1994 COUGAR


cant change the factory code but you can add your own

enter the factory code then press the 1/2 button the enter a 5 digit code when finished press the 7/8 9/0 buttons together

Apr 14, 2009 | 1994 Mercury Cougar

1 Answer

Replacing door speakers


You'll need to remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. If needed, you can pull back the weather seal (can't reuse it, but it's not that important) and you will be able to access everything inside the door

Mar 13, 2009 | 1994 Mercury Cougar

2 Answers

Driver door latch opens outside only


From the interior side, remove any screws for the armrest, door panel itself, remove window and door and handle if equipt. Remove door strap if present...pop loose the door panel trim or "door panel" and carefully remove without damaging the inside window weatherstripping.

Mar 12, 2009 | 1991 Mercury Cougar

2 Answers

1995 Mercury Cougar Door Panel Removal


This nearly drove me crazy on our 1994 Cougar.
First remove the electric switch cover(window and mirror controls). Just pops out with a pry. Remove the harness attachments You will see a single screw into the door holding a bracket between door pad and door frame. Remove it.
Second, remove the door lamp plastic cover at the bottom rear of the door. You will find a second screw in there on the upper right corner. Remove it and you are ready. Pull the whole door pad upward and it comes right off. No popem plastic clips or anything else. Just 3 or 4 quarter circle retainers that pop over into the door when you push the pad back down

Oct 26, 2008 | 1995 Mercury Cougar

Not finding what you are looking for?
1995 Mercury Cougar Logo

187 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mercury Experts

yadayada
yadayada

Level 3 Expert

63990 Answers

Fordexpert

Level 3 Expert

5331 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21990 Answers

Are you a Mercury Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...