Question about 1997 Ford Expedition

1 Answer

Ford expedition was wondering if you ever fugured out what your heating problem was. :heat in rear not in front. I am having the same issues.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Check fuses i had exact sme problem blend door fuse was blown

Posted on Jan 14, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

What is the radiator dimension size for a 1998 ford expedition 4.6L 2x4


For a 98 Ford Expedition, I've found an aftermarket manufacter that specifies this measures, just for the radiator core:
Height.- 31-7/8"
Width.- 16-3/16"
Thick.- 2-1/4"
Inlet/outlet .- 1-3/4"
But before changing the whole part, you should have an expert opinion first, because not all overheating problems are a radiator failure.

Jan 20, 2015 | 1998 Ford Expedition

1 Answer

Have a 2004 ford expedition, heat will blow out rear vents but blows cold air out the front.


you need to have automatic ac and heater control checked out at a garage problem could be in the mode switch or electrical problem causing front blend door actuator not working properly.your vechicle has the EATC SYSTEM which is computer control need diagnostie equipment to fix.

Dec 11, 2011 | 2004 Ford Expedition

1 Answer

Front heat works, but rear blows cold air only


With your front heat working the most likely cause for the rear heat not to work is that there is an obstruction in the line that is preventing the warm coolant to get to the rear heater core or the rear heater core itself is plugged and not circulating. Another possible cause could be low coolant level where the system has enough coolant to provide the front system with enought warm coolant but not the rear system. Hope this helps

Dec 30, 2009 | 2004 Ford Expedition

1 Answer

2003 ford expedition front heat and air work, but rear puts out cold when its cold out and heat when its hot out, no matter what setting.


there are 2 blend doors in back on the passenger side rear. one controls heat settings and the other mode floor or upper vents. These go bad and there is usually a clicking noise.

Nov 10, 2009 | 2003 Ford Expedition

1 Answer

99 Expedition blows cold in front but not in rear cabin. Heater will work in rear, but no A/C. Front A/C and heat is normal.


somewhere in the cabin there is a panel, behind it there will be a small vacuum valve that opens duct heat/cool for the back. I had it go bad in a windstar and stuck on heat, too lazy to replace so i'd pull panel and manually move it once or twice a year

Aug 15, 2009 | 1999 Ford Expedition

1 Answer

2000 expedition heat problem


first of all I would make sure the car has proper amount of coolant and you are right it is very possible you have an air pocket in the system also ask your self did you change the thermastat after you did the heater core when the car is cold make sure there is coolant at the cold mark on the reservior bottle because you might not have enough coolant then start the car and get it up to temp and if the coolant goes not go up to the hot mark when the car gets to temp you do not have enought coolant just keep adding coolant and you will see the bubble after the thermastat opens

Jan 02, 2009 | 1999 Ford Expedition

Not finding what you are looking for?
1997 Ford Expedition Logo

Related Topics:

111 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

61249 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Fordexpert

Level 3 Expert

5331 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...