The fuel filter can be located under the carpeted cargo storage floor at the rear of the wagon. Remove the four 10mm bolts, remove the cover. You will then see a removeable plate to the right just behind the rear passenger seat. Fuel filter can be seen through hole in hole. Replaced from underneath wagon. Be sure to make sure lines are fully inserted onto filter. Check for leaks. No smoking, extinguisher handy. Note arrow on filter for correct fuel flow.
Wagon v70 awd 1998 will turn over but won't start is it fuel filter or pump? it was running in park, started making a loud grinding noise, i shut it off then tried to start it engine will turn over but won't start. please help wayne
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
the first thing you want to check is whether or not it has a heavy drag at the wheel caused by wrong pads, sticking caliper, improperly installed parts. Lift the car and try to turn the wheel. Just because they are certified does not mean they know everything. I'm certified too, but I also have experience with euros and the quality of parts that need to be used. If inferior quality parts are used it will cause this. It can create all kinds of problems and noises. Take it back until they get it right. Ask them what brand of parts they use. Let me know and if they give you any grief, contact me and I will advise accordingly.
Good luck. It sits on top of the fuel tank. You have to drop the fuel tank, which involves removing the rear subframe and most of the AWD suspension and driveline components. A very good mechanic with the right tools and that has done it before will be able to do it in around 8 hours of labor. It is an expensive part and very labor intensive to replace.