Question about 2004 Chevrolet Silverado 1500 Crew Cab

1 Answer

Horn on 01 silverado just stopped working

Was going down the road the blew my horn for a deer, worked fine. same thing happened a few miles later but i got nothing. it just stopped working. i replaced the relay and now when i hit the horn i can hear the relay click so its gotta be something with the horn. any ideas?

Posted by on

  • Anonymous Mar 12, 2014

    I can hear the relay click lights flash but no sound

×

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 59 Answers

If the relay is clicking then it seems like it should blow. those trucks have a fuse box on inside of drivers door and under hood too. I would get a test light and go across both sides of the fuses and check to make sure none are blown. should be labeled horn. I think there are actually two horns one makes one note and one makes another so it is just about impossible for both to go out at the same time. try wiggling connection at horns themselves and see if it does anything. hope it helped.

Posted on Dec 22, 2008

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My 2002 chevy suburban shuts off while driving,i get pulled ov3r and it starts back 5 mins later runs about twenty miles and dies again. Thought it was fuel filter and chaned it but still does it cant seem...


I had a similar problem with the Fuel pump going bad. It got hot and stopped working. It also blew the fuse when it did that,. Replacing the fuse got me another few miles until it blew again. replaced the fuel pump, all good.

Sep 19, 2017 | Cars & Trucks

1 Answer

Transmission problem?


When is last time you changed trans fluid and filter?

Jul 23, 2016 | 2005 Chevrolet Silverado 1500

1 Answer

2007 chevy 2500 died while driving down the road. Lights/radio still work


The battery light was on because the engine stopped running. The alternator was not charging the battery.
On a model that new, if the engine did overheat the computer could kill it. A stuck thermostat comes to mind. But your temp gauge should have been on the hot side.
Its also possible something locked up and is preventing the engine from cranking, such as the water pump or alternator. You may need to remove the belt to verify. If the belt is slipping it would not power the water pump to keep the engine cool.

May 16, 2013 | 2007 Chevrolet Silverado 2500

1 Answer

2004 silverado died while going down the road at 55mph


i need more info. could be a bad ignition switch

Mar 02, 2013 | 2004 Chevrolet Silverado

1 Answer

1990 Cadillac Eldorado was going down the road fine. Stopped at a stop sign and that is the last time the transmission worked. Was fine until this....now nothing in any gear. Changed fluid and filter...


Yup thats how it often happens. However check your linkage first make sure it didn't slip. Most likely it sounds like you blew your clutches in the trans.

Jul 07, 2012 | 1990 Cadillac Eldorado

1 Answer

1993 Chevy lunimina Broke down 2 times in 3 days done pretty much the same thing both times ill be driving down the road and the car will just stall out while driving changed a blown fuse fir the dis and...


I don't want to seem like a smart ****, but the blown fuses were telling you that something with the component that it was protecting is going bad. So changing the fuse the first time was a go idea, the second time was not. It told you, that something was failing and you refused to pay attention.

But at least you know which fuse blew, so now all you have to do is find out what it was protecting and replace it or what feeds it.

Aug 28, 2011 | 1993 Chevrolet Lumina

1 Answer

Car act like it is going to die at a complete stop


vacuam leak maybe such as powerboster area ? good luck

Feb 14, 2009 | Ford ZX2 Cars & Trucks

Not finding what you are looking for?
Cars & Trucks Logo

472 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

Marvin
Marvin

Level 3 Expert

81294 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...