Question about 1998 Jeep Wrangler
Yesterday my jeep started and ran then this morning it won't.
There is plenty of charge on the battery,but when i turn the key there is nothing.There isn't even a clicking sound like starter selenoid.I did find a starter relayin the fuse box under the hood.Any help on where to start looking for the problem would be greatly appreciated.
Thank you for your time
Put on new battery and starter on 1998 jeep wrangle 6 cylinder...turn switch and nothing but clicking noise..any suggestions!
Posted on May 28, 2011
My 98 Wrangler did the exact same thing. Odd as it sounds, check the battery cables and thoroughly clean any corrosion. I was told by a Jeep mechanic, that the alternator sends out a full charge to the battery and basically the electrical system overloads, and the Jeep won't start.
Posted on Dec 24, 2008
This is basic, but first off, try to shift it into neutral, and try to start it. It is easy for the linkage to get out of adjustment, where it thinks the jeep is in gear. If that does not work, make sure you have battery power to the ignition and starter.
Posted on Dec 22, 2008
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
Nov 20, 2016 | 2002 Jeep Liberty
Aug 16, 2014 | Cars & Trucks
Jan 25, 2013 | Cars & Trucks
Jun 23, 2011 | 1995 Jeep Grand Cherokee
Jan 24, 2011 | 2000 Jeep Wrangler
Mar 07, 2009 | 2006 Jeep Wrangler
Jan 18, 2009 | 2001 Jeep Grand Cherokee
463 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: