Question about 2003 Toyota Camry
Toyota 2003 4 Door Camry, Toyota technician said they are loose, besides a expensive complete replacement and having to listen to, any other possible ideas to reduce noise level, the car has been a very trust worthy vehicle, but my friends always ask what is that noise, technician also said this is common.
Go inside the car, on the drivers side, from the floorboard look at the top of the gas pedal from the door. From the door, look just past the top of the gas pedal you will see the spot to pull the filter out. There are 2 parts to the filter in this car so replace both. One - Filter, 2 charcoal filter.
Posted on Dec 06, 2008
Could be the lower control are bushing, it apparently is an issue with that model year. Big bucks (850 CDN$) to fix as the 'whole' front end needs to be partially dropped and both should be done at the same time. A mechanic should be able to see if that is a problem while the car is on the hoist. The mechanic should be able to point to the area or point where the contact is being made. Mine lasted till 100,000 km, I heard it on the second hand test drive ( at 90,00 km) and asked a buddy ( a Toyota Master Mechanic) about it and he made me aware of it; i bought the car anyways.
Posted on Mar 23, 2009
The steps are described below
Posted on Mar 10, 2010
Did you have the vehicle scanned for codes?
If so what were the codes?
Gas cap has to be pressure tested. Looking fine is not gonna cut it.
If you didn't have the vehicle scanned go to Autozone they will do it free. Then get back to me and we will take it from there.
Posted on Apr 14, 2010
Tips for a great answer:
Jul 09, 2012 | 1996 Toyota Camry
Oct 29, 2011 | 2000 Toyota Camry
Jun 10, 2011 | 2008 Toyota Camry
May 20, 2010 | 1995 Toyota Camry
Apr 16, 2010 | 2003 Toyota Camry
Mar 10, 2010 | 2003 Toyota Camry
Feb 21, 2010 | 2005 Toyota Camry Solara
Aug 15, 2009 | 1986 Toyota Camry
Dec 20, 2008 | 2003 Toyota Highlander
Dec 06, 2008 | 2003 Toyota Camry
305 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: