Question about 1995 Chevrolet Monte Carlo

2 Answers

Turn signals dont work but flashers do what do i do

What do i do about the problem

Posted by on

  • jcroswel Jan 01, 2009

    My signals lights and brake lights stopped working, but the brake Dash light does work. Fuses are OK, can't seem to find the signal flasher, still looking.

×

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 141 Answers

There are two flasher one for the hazards and one for the trun singals, check under the dash i think the one for the trun singals is in the fuse box it will be round and silver in color. trun the hazards on if it is clicking keep looking it under there

Posted on Dec 22, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Chevrolet Master
  • 6,674 Answers

Check in fuse panel area for a second flasher. Usually 1 for hazard, & 1 for signals. If signals don't illuminate at all when signals on, check for fuse in panel.

Posted on Dec 22, 2008

3 Suggested Answers

  • 337 Answers

SOURCE: locating the turn signal flasher on 1993 corsica

The turn signal flasher is mounted in a clip on the right side of the steering column support bracket. The hazard flasher is located in the component center, under the instrument panel, on the right side. Replace the flasher by unplugging the old one and plugging in the new one.

Posted on Dec 03, 2008

  • 4 Answers

SOURCE: 1997 Chevy Tahoe both turn signals stopped working

Sounds like the flasher unit to me. Normally the emergency flasher and turn signal are separate.

Posted on Jul 21, 2009

  • 5 Answers

SOURCE: locating the furn signal flasher on 1993 corsica

first check all light bulbs.. they are on the steering column. have to remove the plastic under column to get to.

Posted on Oct 09, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My turn signals in '03 olds alero dont always work. When they dont, if i push hazard button my signals will work again. I already replaced the turn switch stick on the steering column n continue to have...


Its not the flasher.

The hazzard switch is the most likely culprit since it directs current to either the turn signal switch or directly to the turn signal lights depending on its position. Over time the contacts wear out in the flasher switch. When you push it in and out you are allowing good contact to return to the normally off function that routes power to the turn signal switch.

The flasher switch can be found at any good parts store.

Oct 02, 2014 | Cars & Trucks

1 Answer

Turn signals wont work bulbs ok dont have a manual to the car dont know wich fuse goes to the turn signals


pickup a test light and check all the fuse if the fuses are good then you probably have a bad signal flasher.make sure you change the signal flasher and not the emergency flasher as they look the same.

Jul 30, 2011 | 1995 Ford Mustang

1 Answer

I need a flasher box for a 1999 vw passet and i would like to be cheap my flashers dont qwork my emergency flashers dont work my turn signals dont work what could be the problem


The turn signal fuse may have blown, or The Turn signal/4 way [ tick tock ] relay has failed. Just replace it, and away you go.
Regards, DT

Feb 21, 2011 | 1999 Volkswagen Passat

1 Answer

I have a 92 lumina. The turn signals dont work.


The hazard lights has it's own flasher, change the flasher for the turn signals and see if that works. To find out which flasher it is, put on the hazard lights, and put your finger on the flashers, which ever one you don't feel clicking is the turn signal one.

Nov 14, 2009 | 1992 Chevrolet Lumina

2 Answers

Turn signals hazards flasher don't work jeep cherokee replaced combination flasher relay, turn signal switch and still no signals


I NEED TO LOCATE THE SWITCH WHERE IS IT ?
MY INDICATORS NOR HAZARD LIGHTS ARE WORKING I DONT KNOW WHAT IS WRONG WITH IT CHANGED BULBS BUT NOTHIGN THEY ALL WENT OUT AT THE SAME TIME
SO THERE MUST BE A RELAY SWITCH SOMEWHER BUT DONT KNOW WHERE ?
THANKS FOR HELPING

Sep 27, 2009 | 1999 Jeep Cherokee

1 Answer

Emergency flashers work but turn signals dont


Your signals work on a seperate system then your flashers. Sounds like your multifunction switch is busted.

Apr 07, 2009 | 2003 Jeep Grand Cherokee

2 Answers

97 honda accord turn signal problem


Flasher unit is bad. Replace flasher

Dec 28, 2008 | 1997 Honda Accord

1 Answer

Blinker dont work flasher and other lights work


The turn signals don't work, but the emergency flashers do? If that's the case, replace the flasher, you have 2 flashers, one for emergency (hazard) flasher, and one for the turn signals. It should be on the fuse block under the dash.

Oct 23, 2008 | 1995 Jeep Cherokee

Not finding what you are looking for?
1995 Chevrolet Monte Carlo Logo

Related Topics:

201 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

61037 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...