Question about 2005 Mitsubishi Endeavor

1 Answer

Tune up 2004 mitsubishi endeavor

How do you get the spark plugs on the side of the engine next to the fire wall out?

Posted by on

  • Anonymous Mar 16, 2014

    vehicle shut down while driving and will not fire now.

  • Anonymous Mar 16, 2014

    2004 mitsubishi endeavor no fire stuck in park

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 2 Answers

You have to take the plenum off. the big plastic thing on top of the engine.

Posted on Jan 02, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Where is bank 2 on mitsubishi endeavor 2007


Bank two is the side with cylinder number 2. The even number cylinders should be on the side next to the radiator.

Mar 07, 2013 | 2004 Mitsubishi Endeavor

1 Answer

I have a 2004 Mitsubishi Endeavor xls, It seems to be bogging down when I step on the gas to pass someone rather then speed up... Can anyone please help me ?? thanks


Sounds like your fuel filter is giving you early warning that its time to replace. The big question- when was last healthy tune up? All filters, plugs etc...

Feb 14, 2011 | 2004 Mitsubishi Endeavor

2 Answers

My spark plugs in my 2004 Mitsubishi Endeavor needs to be changed, and my husband wants to do it himself so is there some way to give me some instructions on how to change spark plugs for my 2004...


YOU NEED LONG SPARK PLUG SOCKET. NEED A 3/8 INCH RATCHET WRENCH.YOU NEED EXTENSION.YOU NEED SPARK GAUGE YOU NEED A TORQUE WRENCH. NOT MANDATORY JUST DONT OVER TIGHTEN SPARK PLUGS STRIP ALUMINUM THREADS WAIT UNTIL ENGINE COOL TO KEEP FROM WARPING THE HEADS. SPARK PLUGS LOCATION ON TOP OF CYLINDER HEADS.TO GET TO SPARK PLUGS THE COILS ON TOP EACH SPARK PLUG.HAS TO BE REMOVED BY REMOVING SMALL SCREW.THAT HOLD COILS DOWN.AND CHANGE ONE SPARK PLUG AT A TIME SO YOU WONT GET THEM MIXED UP.GAP PLUGS AT 0.028 - 0.031

Jan 28, 2011 | Mitsubishi Endeavor Cars & Trucks

1 Answer

Air condition drain clog where is it located?


are your getting water in side your car on the passenger side,if you are the A/C drain is a little black hose under car at the bottom of fire wall on passenger side. just insert a rod or something about four inches long in hose.

Dec 15, 2009 | 2004 Mitsubishi Endeavor

3 Answers

I HAVE AN ENDEAVOR 2004 AND IS LEAKING IN PASSENGER SIDE


refer to this post for a solution

http://www.fixya.com/cars/t2592290-air_conditioner_drain_plugged

Jul 26, 2009 | 2004 Mitsubishi Endeavor

2 Answers

On my 2004 Endevor, change the spark plugs reuires removing what?


To get to the rear spark plugs you have to remove the intake plentum (Black plactic piece on top of motor)

Mar 04, 2009 | 2004 Mitsubishi Endeavor

2 Answers

Mitsubishi 2004 Endeavor


these are under the vehicle usually parallel to the fire wall and more towards the passengers side tire.

but if it smells like antifreeze then the heater core is leaking

Feb 21, 2009 | 2004 Mitsubishi Endeavor

1 Answer

2004 Mitsumishi Endeavor


The front three should be easy enough. They are right in front of the intake plenum. (big black plastic looking thing on top of the engine. The back three are underneath the intake plenum. It seems like a lot to tackle but it is really not that bad.
As always, if you are not sure you have the skills to attempt this go to a qualified mechanic. I did mine in an afternoon.

Jun 07, 2008 | 2004 Mitsubishi Endeavor

Not finding what you are looking for?
2005 Mitsubishi Endeavor Logo

Related Topics:

1,143 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts

yadayada
yadayada

Level 3 Expert

70374 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6878 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...