Question about 1995 Plymouth Acclaim

2 Answers

Turn signal lights not working at all

I have a 1994 Plymouth Acclaim and the turn signal lights do not work at all. The fuses are OK and the hazard lights work. I was advised to buy a turn signal assembly to replace the old one by the mechanic. Do you think that will fix the problem? He tested the electrical wires under the steering and found out there was no power on the turn signal switch wires. The problem is Auto zone which is a car parts store have just the turn signal switch. Is that the same with the turn signal assembly?

Posted by on

  • parud01 Dec 22, 2008

    The mechanic tried all that but nothing worked and does not even show any signal arrows on the dash board and no cliking sounds at all. Please help? Thanks for trying.

×

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,201 Answers

Yes, the turn signal switch is the same thing as an assembly.

Posted on Jan 26, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,114 Answers

Change signal flasher your car has a flasher for hazard and another for signal open fuse panel put for ways on you will hear it clicking the opposite one not flashing will be the one good luck!

Posted on Dec 22, 2008

  • 1 more comment 
  • John Jon Dec 22, 2008

    well did you try the signal flasher? it might be a old version called 4 way flasher or it might be separated with two flasher1 for hazard other signal please let me know if you tried this.

  • John Jon Dec 22, 2008

    is it working with new flasher?

  • Glenn Williams
    Glenn Williams Jun 14, 2013

    Where is the signal flasher located on my Lumina?

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Do 1994 Plymouth Acclaims have reverse light switches? The reverse lights stopped working on mine.


there should be reverse light switches but it may activate through the TCM unit or light control module.

Aug 12, 2015 | 1994 Plymouth Acclaim

1 Answer

Where can you locate the turn signal flasher unit on a 1992 plymouth acclaim


There are two flasher relays under the dash in the car. One for the hazards and one for the turn signals. They are next to the fuses under the steering wheel right by the hood release

Nov 05, 2012 | Cars & Trucks

1 Answer

So my blinkers have good bulbs and the hazards work but turn signals do nothing


turn signals switch is bad it is most likely under the dash it looks like a back box and plugs in like a fuse

Nov 19, 2011 | 1991 Plymouth Acclaim

1 Answer

Can not locate turn signal flasher unit. located hazard flasher but turn signal flasher is not on the same block even though the block is labeled for the turn signal flasher.


usually the one flasher serves both turn signal & hazard flasher, if either one isn't working you may have other problems.....hope this helps.....cheers.

Jun 27, 2011 | 1989 Plymouth Acclaim

1 Answer

I have no signals and when brakes lights are on, lose brake light to either side turn signal is set on


Hi!!

If you activate the turn signal switch and you step on the brake pedal, the turn switch (on the steering column) deactivates the brake light to make the signal light more visible. The bulb for the stop and turn lights is the same.

Turn hazard lights ON. If they don't blink, replace turn/hazard flasher, If one or more lights don't come on, replace bulb.

Check fuse and circuit wiring for broken or loose connections. If all looks fine, check following:

If front turn lights work fine, check brake/turn bulbs.

If turn lights come on but don't blink, replace turn signal/hazard flasher.

If front and back turn lights don't come on, replace switch on column.

Let me know how it worked out, Good Luck

Mar 24, 2010 | 1991 Plymouth Acclaim

1 Answer

Where is the relay located for the turn signals on an 89 plymouth sundance? The lights work on the signals, but don't blink when you turn them on


your fuse block is located behind the steering column cover acessible by removing the fuse access panel above the hood latch release lever.the relay and flasher module is located behind an access panel in the glove box.included in the module are hazard and turn signal flashers along with time delay and horn relays.you have additional relays mounted on the inner fender panel near the battery and strut tower.

Dec 13, 2009 | 1994 Plymouth Sundance

1 Answer

94 Plymouth acclaim speedometer and dash lights wont work


Try replacing light bulbs and flasher which may correct the turn signals. Check all fuses, however as for the speedometer, the plastic clogs or wheels have run their course, If you intend to replace these, suggest you purchase a repair manual for your vehicle.

Aug 22, 2009 | 1994 Plymouth Acclaim

2 Answers

1991 plymouth acclaim break & signal lights not working


it is the switch where you turn the lights on

Feb 14, 2009 | 1991 Plymouth Acclaim

2 Answers

1994 Plymouth acclaim


Check your fuse panel first. If not no problem there. Then need to check your dimer switch. That will make your light stop working. If not that, it has to be the main light switch.

Jan 02, 2009 | 1991 Plymouth Acclaim

1 Answer

Turn signal will not ''flash'' on /off-cops pulled me over about it


The problem is most likely not a bulb and certainly not a fuse but the 'flasher'. The flasher is located under the driver's side A/C duct above the fuse box. It just plugs in so you shouldn't need any tools.

Dec 13, 2008 | 1991 Plymouth Acclaim

Not finding what you are looking for?
1995 Plymouth Acclaim Logo

486 people viewed this question

Ask a Question

Usually answered in minutes!

Top Plymouth Experts

yadayada
yadayada

Level 3 Expert

70387 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6880 Answers

Are you a Plymouth Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...