Question about 2000 Land Rover Range Rover

1 Answer

V6 holden engine on lpg just stops while driving !

1992 Holden V6 wagon running on lpg, the engines simply stops when the drivers foot is lifted off the accelerator after being driven along at a constant speed, mostly happens on slowing for corners or going down hill. Have spent over $700 so far, no one seems to be able to find the problem ?? Vehicle went in for a tune up and came back with this problem, it was only running rough when it went in, not "running out of fuel", which is what it seems like.
Any ideas would be greatly appreciated and maybe oout mechanic can learn some thing from it as well !!!?
kind regards,
Reg, Victoria, Australia.

Posted by on

  • losjackos Apr 24, 2009

    exactly the same, when you idle at lights or slow down on the freeway, it cuts out.



    On gas, when started on petrol it is OK until it's really hot, then it does it as well.

  • Angelo Attard
    Angelo Attard May 11, 2010

    whats it run likeon petrol does it do the same thing

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 2 Answers

If the filter has already been changed, then the pressure regulator, which also acts as the vaporiser, must be suspect. It is equipped with a soleniod valve that shuts of the flow when the engine is not running,or if it thinks its not running.

Posted on Feb 06, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Wat kind of v8 is suitable for a 1997 3.8 v6 holden commodore excutive


your VT /VX came out with a V8 engine
you need the engines ECU and the V8 gearbox
manual diff ratios can be optional

1997 -2002 engines will bolt in

you could go up the next commy V8 model it has roller rockers
you can have a v6 or v8 supercharged if you like

once all bolted in you need a mutt 2 diagnostic reader to reset all the keys and modules and immobilizer for it to start and run

http://forums.justcommodores.com.au/vt-vx-holden-commodore-1997-2002





26317726-igf4vixkefavsop0s5kuy20y-4-0.jpg

26317726-igf4vixkefavsop0s5kuy20y-4-1.jpg

26317726-igf4vixkefavsop0s5kuy20y-4-3.jpg

Oct 19, 2016 | Holden Cars & Trucks

2 Answers

2006 holden rodeo with 3 ltr Isuzu engine. Will run and drive and then stop with error code p1630a. If you pump priming pump and hold throttle down it will start and run for a while.


P1630 "Theft Deterrent Learn Mode Active", this causes a stall and the hard start. You may have a problem with the control module.

Aug 31, 2016 | Isuzu Cars & Trucks

2 Answers

While driving the engine looses power and you can not put foot down as no power, release foot a little and will jerk and gain little speed


Catalytic converter is clogged up. To make sure, you can remove the pre O2 sensor or loosen the exhaust flange at the manifold. This lets the engine exhaust/breathe. If it runs well , replace the catalytic converter/s

Nov 08, 2015 | Holden Cars & Trucks

1 Answer

How do I replace the engine drive belt tensioner bearing on a 2007 Holden Commodore V6?


These pulleys can be bought complete with new bearing as an assembly from any bearing shop. Replacing the bearing is not always successful or cheap.

Jul 28, 2014 | Holden VT Cars & Trucks

1 Answer

How does the vaccume routing go on the L67 supercharged v6 if at all possible a diagram would be great thank you


first off , vacuum lines vary by engine. and country
in 1992 there are many SMOG vacuum lines that vary by the laws of your country, .
IS this a HOLDEN CAR, WITH l67 ENGINE>? 1992.
the only way to get this is at HOLDEN and buy the FSM.
sure way.
Down under you are, right>? land of AUZ./

Jun 29, 2014 | 1992 Holden VQ Statesman

1 Answer

How to install a magnetige pick on a 1997 holden v6


we dont have holden here, but the FSM on all cars cover that.
buy one?
the CKP sensor "crank position sensor" is found in 3 places on all engines.
(bolts to front of engine Front means below front at crank pully)
others are at flywheel
and some are in the center of engine, near impossible to remove.
so lets use google, (its best value if ever and search)
the best way to search is to know what engine, and V6 is not that.
its here.
An overhauled Ecotec (Emissions and Consumption Optimisation through TEChnology) version of the Buick V6 engine
so its and Ecotec, we narrow the field. (research 101)
but which one. ?
1997 holden when a little nuts, with opel parts, etc. very hard to track.
ok here it is series II
OMG a number the engine is and L36, wow.

our V6 is here L36
first google hit L36

http://www.gmforum.com/1992-1999-91/dtc-p0336-crankshaft-position-ckp-sensor-circuit-229719/

cant say for holden.
but look , see it?

better , post symptoms... far better than wild guessing.



May 09, 2014 | 1998 Holden VT Commodore

1 Answer

What oil would you use on a vt 1999 300000kms?


Try Valvoline maxlife designed for high mileage engines .
reaches wear,oil usage.

hope this helps you

Apr 03, 2013 | 1999 Holden VT

2 Answers

Can i put a 98 holden v6 into a 82 wb ute?


I assume a holden is basically a chevy

So if it is rear drive & the one it goes
into then-- yes

Mar 10, 2013 | Holden Cars & Trucks

1 Answer

Rodeo petrol starts but wont rev


Holden Rodeo 1989 2.6mpi , start and only runs for 2 or so seconds themselves stalls, after putting on a fuel peesure gauge, fuel looked okay and slowly dropping, found the ECM relay was intermittently switching on and off, gave it a tap and the engine kept on running, relay not repairable, replace with new part. Located in the fuse and relay box on the right hand side of engine bay next to battery. Hope this helps.

May 24, 2012 | Holden Rodeo Cars & Trucks

1 Answer

I have a 1983 Toyota Hiace Commuter Van with a 3Y motor in it. I want to put a V6 in it. Which V6 will fit in the engine bay


A Toyota v6 out of a hilux 4runner will go in and be about half again the power and torque. Should be able to fit a 2wd transmission off the van to it. Or here in Nz and Australia the Holden 3.8 v6 is a very popoular conversion. Use the holden trans and modify the drive shaft to suit. Holden v6 is a rear wheel drive version of the Buick v6. Also seen Toyota 1UZ and Chev v8s fitted in without cutting metalwork, so room is not as much of an issue as you would think!

Nov 02, 2009 | 1985 Toyota Passenger

Not finding what you are looking for?
2000 Land Rover Range Rover Logo

248 people viewed this question

Ask a Question

Usually answered in minutes!

Top Land Rover Experts

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

yadayada
yadayada

Level 3 Expert

60867 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Land Rover Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...