Question about 1989 Cadillac Brougham

1 Answer

Turn signals dont work at all the green arrow doesnt even come on i already replaced the flasher relay but im being told there is another one where is it

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

Hello. check you fuse panal. look in the user manual that came with the car. it will have a fuse panal diagrame of what fuses control what. check if the twight senenal is working. it might be burned out. it will be located behind down to the right of your cruse control on off switch. wiper switch top headlight switch mid- cruse bottom. your cruse control switch and your headlight switch will have to be removed to get at the twilight sentenal switch. mabe your turn signal lights are buned out. you can replace them. you will have to remove your speedometer panal to get at them. an other posabllity is that your turnsignal switch on the steering collom isn't working. I segest that you buy the haynes repaire book. you can get it at canadiantire. and online at amazon.com. your fuse pannal should be down on the bottom left on the drivers side underneath the dashboard where your parking break is.

Posted on Feb 20, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

T urn signal flasher does not flash on my 1996 chevy blazer


do u mean ur turn signals do not flash an does the green turn signal arrow on ur insterment panel light upwhen u go to turn them on...if they dont flash an the arrow lites replace the turn signal flasher ..it is a round sliver cylinder located in the fuse box or under the dash on the steering column

Jul 14, 2011 | 1996 Chevrolet Blazer

3 Answers

Turn signals dont work on 1993 skylark. all bulbs are good. hazard lights blink fine. turnsignal dash light stays green and doesnt blink


There are 2 separate flasher relays. 1 for the turn signals and one for the hazards. I believe you have a bad flasher relay for the turn signals. The location of that is in the front seating area on the drivers side, under the dash on the drivers side of the steering column, mounted on support bracket. I provided a picture of what it should kind of look like although the picture I gave you is an aftermarket one so the color and such may be a little different but will look the same. Don't get it mixed up with the hazard relay which is located in the front seating area on the drivers side under the dash above the kick pane lmounted on top of the convenience. I am almost 100 percent sure the flasher and hazard relay are the same so if you want to just swap them out in order to have turn signals that should work. You won't have hazards however. I hope this helps you and good luck.


clifford224_215.jpg

May 07, 2011 | 1993 Buick Skylark

2 Answers

I have a1998 GMC Jimmy 4x4/ 4 door slt. The blinkers don't work on the front or back of the vehicle. No indication of the green arrows on the dash board our a relay tick either. Also my brake lights don't...


Try wiggling the turn signal switch and see if brake lights and or turn signals start working.Gm did have a recall on the multifunction switch on later models but it did affect earlier models as having the same problem. It's is possible that the multifunction switch is the cause of it all but is also possible that the flasher relay has gone bad but the relay wil only affect the turnsignal and hazrd flashers.

Apr 23, 2011 | 1998 GMC Jimmy

1 Answer

Ihavr a 2000 chevy cavalier for some reason the brake lights dont work most of the time, also along with this the turn signals ewont flash. ive already replaced both sockets and bulbs in the rear im not...


Check your fuse first thing. You may also have a bad brake light switch. If the turn signals come on but just will not flash then replace the flasher relay.

Apr 04, 2011 | 2000 Chevrolet Cavalier

1 Answer

1977 trans am 4 ways and turn signals dont work the little green arrows dont even come on but when i push the breaks both little green arrows come on at the same time checked bulbs ok fuses ok but cant...


The signal flasher will be a tube about 1 inch long usually round and cylindrical it will have either 2 or three pins on it. There will be two of them and they will both be located jsut about the fuse box. swap them onis is the four way flasher one is the signal flasher. if this fixes the problem replace the bad flasher module

Feb 27, 2011 | Pontiac Trans Cars & Trucks

2 Answers

The left and right turn signal doe's not work at all, everything else works but them. I have a Dodge Durango 2000 i check all the fuse's and relay new one's, but there is a Green flasher or relay up high...


turn on hazzard flashers,locate relay under dash by following sound,was this flasher that was replaced they are very simular.if not replace turn signal flasher again,might have got bummed one.onlt other optin is turn signal switch,chech connector at bottom of steering colum.any other functions on colum failing is good indicator of switch,switch is rare failure

Feb 18, 2011 | 2000 Dodge Durango

1 Answer

Turning Signals not working


if 4way flashers work & no signal,,,i would replace signal flasher,,,there are two flashers ,,,,

Apr 28, 2010 | 1989 Buick LeSabre

1 Answer

I had asked why one turn signal was working and one was not and was told it could be the relay but im not sure where those are on my 95 aurora


no it not a relay..since you one turn signal work..a turn signal relay it call a flasher which control both turn single it under the dash(driver side)...turn signal relay it the only round one on there..you never miss it

Apr 21, 2010 | 1995 Oldsmobile Aurora

1 Answer

My signal turn sometime is not working


When the signal is not working does the indicator in the dash stay lit ( green arrow) ?? if so check all the bulbs..another possibility may be a weak signal flasher . replace the flasher and or burned out bulbs. note.. some bulbs do burn out and work intermittently due to the fillaments contacting now and then due to bumps in the roadway. if these solutions dont work you may need a signal switch in the steering column....good luck

Nov 05, 2009 | 2002 Pontiac Grand Am

2 Answers

98 chevy Blazer Turn Signals quit


Combination switch in the steering column is most likely bad

Mar 01, 2009 | 1997 Chevrolet Blazer

Not finding what you are looking for?
Cars & Trucks Logo

211 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cadillac Experts

yadayada
yadayada

Level 3 Expert

60867 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Cadillac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...