Question about 2008 Jeep Patriot
If you are looking down at the headlights from above there is a whiteish nylon screw that you can use either an allen wrench or a phillips screwdriver. Clockwise lowers, Counter clock raises.
Posted on Feb 08, 2009
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Tips for a great answer:
Dec 12, 2015 | Jeep Cars & Trucks
Nov 08, 2014 | 2008 Jeep Patriot 2.4
Jun 14, 2012 | 2009 Pontiac Torrent 4WD
2. ADJUST HEADLIGHT AIM ONLY
(a) Place the vehicle in the following conditions.
The area around the headlight is not deformed.
The vehicle is parked on a level surface.
Tire inflation pressure is the specified value.
A driver is in the driver's seat and the vehicle is in a state ready for driving (with a tank full).
The vehicle has been bounced several times.
(b) Check the headlight aiming.
(1) Prepare a thick white paper.
(2) Stand the paper perpendicular to the ground at the position 3 m (9.84 ft) away from the headlights
(3) Ensure that the center line of the vehicle and the paper face forms a 90-degree angle as shown
in the illustration.
(4) Draw a horizontal line (H line) on the paper, showing where the headlights should strike.
(5) Draw a vertical line (V line) at the position where the extended center line of the vehicle strikes.
(6) Draw 2 vertical lines (by connecting the low and high beam center marks) to where the both headlights
should strike (V RH and V LH lines).
(7) Draw a horizontal line (by connecting the both low beam center marks) at the position where the
headlights should strike (H RH and H LH lines).
The H RH and H LH line is 0.4° below the horizontal line (H line) of the light axis.
(8) Start the engine.
(9) Turn the headlights ON.
(10) Check that the headlights properly strike the position shown in the illustration.
Dec 02, 2010 | 2004 Toyota Sequoia
Jul 20, 2010 | 2008 Kia Optima
Nov 07, 2009 | 2008 GMC Sierra 2500HD 2WD
Nov 06, 2009 | 2003 Mazda Mazda6
Oct 10, 2009 | 1996 Ford Mustang
339 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: