Question about 1996 Jeep Grand Cherokee

1 Answer

Want 2 swap good 96 tranny into bad 98

Can i reprogram computer? or need 2 change silenoids in valve body?

Posted by on


1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that gotĀ 5 achievements.


    An expert whose answer gotĀ voted for 20 times.

    New Friend:

    An expert that has 1 follower.

  • Expert
  • 84 Answers

Is the trans from the same engine type ie 4.0l petrol, if so fit it fill with oil and drive. If not then you could have issues. tell me the two types and i will tell you if it is possible.

Posted on Dec 22, 2008


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Have a 98 ram with 318, body smashed. Will the motor transplant into a 2000 Dakota 4.9. Thank u

Greg, you may have to transfer everything from donor truck to make the swap work tranny , computers, wire harness, fuse/relay center etc. Check the attached links,forum for Dakota engine swaps,instruction and guides, Good luck
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."
engine swap 4 7 to 5 2 or 5 9 Dodge Dakota Forum Custom Dakota Truck Forums

2000 dakota engine swap not sure which engine would be easier 4 7 or 5 2

318 Dodge dakota 0 60 v8 swap

Apr 13, 2016 | Cars & Trucks

1 Answer

Can i replace a 96 sentra engine with a 96 nissan 200sx engine of the same year?

Possibly, if they are the same size (cid/litre). Most vehicles in the year would have the same sensors and such. The biggest problem with swap-outs may be things such as the oil pan and headers as they may be different because of body styling. You really can't change the engine size because the wiring harness and the PCM programming would not be correct for the new engine and reprogramming, while possible, is costly.

Oct 02, 2015 | 1996 Nissan Sentra

2 Answers

I have a 1998 corvette with 2008 wheels; can I switch the valve stems to 1998 to get the tire pressure warning system to work?

Only 1998 style valve stems will send the correct signal to the tire pressure control unit. If you can fit the 98 valve stems into the 2008 wheels, its worth a try. Also, you will need to reprogram the sensors in the wheels once they are on the car.

If you need further help, reach me via phone at

Sep 24, 2015 | Cars & Trucks

1 Answer

96 taurus ax4n tranny

You might need to replace the valve body clip with the upgraded (stronger) one. Ford had problems for a while with the clip breaking and not allowing the tranny to shift into O/D. I had the no O/D problem, I replaced the clip with the upgraded (stronger) one which fixed the problem.

fix with this kit
Sonnax 96206-07K AX4N 4F50N Transmission forward control valve,

Below are the DTC codes if it has any. ISSUE
No 4th gear operation (no 3-4 shift) and Diagnostic Trouble Codes (DTCs) P0734 and/or P0761 or 648 may occur on some vehicles.

Nov 19, 2013 | 1996 Ford Taurus

1 Answer

I have a 89 toyota extra cab pickup with v6. it needs tranny. what years will interchange? going to swap for working tranny from private owner. where to start.

i thinks it will swap with a 89 to 95, possible a 96 will work. the identification label on the inside of the door will have your tranny listed. g58, w56, w59 and r150f. something like that, find another like it and your good to go.

Sep 08, 2010 | 1989 Toyota Pickup SR5

1 Answer

Can i swap 1996 4.0 explorer engine into 1998 4.0 explorers .

what motor is in it right now if it's not a 4.0L u will need the computer from te new 4.0L the tranny will be diferant from the 2wd and 4wd

Jun 05, 2010 | 1996 Ford Explorer

1 Answer

1994 Caprice LT1 (Ohio Highway patrol vehicle in past). Vehicle vibrates when in 4th gear/lockup. Can play with accelerator and get vehicle vibration smothed out. Certain speeds worst than others 64MPH...

It sound like it's the Torque Converter clutch is worn and needs to be replaced, or your transmission fluid pressure is low. check the transmission fluid level and condition of the fluid, Make sure it's not burnt and has no bubbles in it. Take it to a transmission shop for a transmission oil and filter service and have them do a transmission fluid line test and have them scan the transmission with a tech 2 scanner. The Tech 2 scanner can reprogram the transmission for a higher line pressure and change the shift patterns if needed. An other thing too is to have the 4L60E transmission you have, get a servo swapped out with a corvette servo. The cost is $45.00 for the servos and takes about 30 min to do with out dropping the valve body. Good luck and hope this helps. keep me posted, be glad t help

Jun 08, 2009 | 1996 Chevrolet Caprice Classic

1 Answer

98 Mercury Sable no overdrive

I would suggest trying a tranny service. Changing the fluid and filter may help this. You can also put some transmission conditioner or something in it and try that. Lucas makes a real good transmission cleaner/conditioner. Be careful not to overfill the tranny though by adding this product. If this doesn't fix it then the soleniod will probably need to be replaced which requires tearing into the tranny

May 12, 2009 | 1998 Mercury Sable

1 Answer

1992 saturn sl2 transmission problems

You can try to do the reverse slam fix, which is easy to do:
Reverse slam fix

If it doesn't work, your valve body is probably bad, here is how to swap it, in case you are up for the challenge:
Swapping a valve body on a saturn TAAT trans.

An other possibility is your mainshaft nut could be loose, I don't have an article up for it yet, but it's comming.
An other possibility is that you have a bad VSS (or Vehicle Speed Sensor).
In any case, your transmission is probably OK, the valve body is accessible from the top of your transmission, right under the battery tray.


Jan 12, 2009 | 1999 Saturn SL

1 Answer


sorry not a tranny guy

Jun 30, 2008 | 1998 Ford Ranger SuperCab

Not finding what you are looking for?
1996 Jeep Grand Cherokee Logo

Related Topics:

44 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts


Level 3 Expert

81400 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22359 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides