Question about 1994 Nissan Pickup

Open Question

94' Nissan pickup heater vents won't switch

This is a 1994 Nissan XE 4-cyl, 5-spd 2WD. The only vents that produce high air flow from the heater are the ones on the front of the dash that have the pivotal slats.

When switched to defrost, very small, weak air flow comes out of the defroster vents and when switched to split between feet and defrost, very small or no air flow from the floor vents or the defrost vents either.

I took up some slack in the manual wire from the heat lever, door operator cable but has not helped.

Posted by on

  • laurelfence Feb 03, 2009

    I have a 1986 f-250 pickup, and with the heater on high I can only get air through the vents. When I turn the switch to floor or defrost the air flow still comes out of the vents. I checked the damper and it works accordingly with which setting I have it on but it seems like there is a air flow restriction somewhere else.

×

4 Suggested Answers

  • 120 Answers

SOURCE: 2005 nissan sentra-air stuck on defrostwont switch to floor or ve

vent door is stuck open

Posted on Feb 14, 2009


ourhowse
  • 2007 Answers

SOURCE: stuck on defrost

Check for vacuum lines under the hood that are loose, off, or cracked. With the engine running, wiggle them around and listen for a hissing sound.

Posted on May 22, 2009

  • 142 Answers

SOURCE: 2008 Nissan Versa - defrost

the deflector flap that move to direct air flow is stuck under the dash.

Posted on Jun 02, 2009

  • 242 Answers

SOURCE: air/heat will only blow out dash vents,will not

motor linkage cables not moveing ,find heatermotor and move mechs until you get them to blow where you need them

Posted on Dec 24, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I need parts for a 2007 Nissian Frontier. What other years are compatiable with a 2007?


Depending on the sub-model, 2005 - 2012 versions *can* fit. Look for yours in the list below:

  • Fit note: Crew Cab Pickup, Extended Cab Pickup
This product fits the following Nissan Frontier submodels
  • 2013-2013: Desert Runner; 6 Cyl 4.0L;
  • 2011-2013: S; 4 Cyl 2.5L;
  • 2011-2013: SL; 6 Cyl 4.0L;
  • 2011-2013: SV; 4 Cyl 2.5L;
  • 2011-2013: SV; 6 Cyl 4.0L;
  • 2009-2013: PRO-4X; 6 Cyl 4.0L;
  • 2011-2012: S; 6 Cyl 4.0L;
  • 2008-2010: SE; 4 Cyl 2.5L;
  • 2005-2010: LE; 6 Cyl 4.0L;
  • 2005-2010: SE; 6 Cyl 4.0L;
  • 2005-2010: XE; 4 Cyl 2.5L;
  • 2005-2008: Nismo Off-Road; 6 Cyl 4.0L;
When calling to inquire or order - tell them the year, make, model (S, SL, SV, LE, SE, XE, etc.) Cab type (crew, extended, etc.) before paying. Have a look at the link below.

2005 2012 Nissan Frontier Tail Light Replacement Driver Side...

May 13, 2014 | 2007 Nissan Frontier SE Crew Cab

1 Answer

I have a '86 Nissan XE 2WD P/U w/ 2.4L 4- Cyl., Installed a re-build kit in the throttle body. Now the TB is flooding when ignition key is turned to the on position. Someone told me to turn the


Hey Ron,here's a link to your throttle body,I have a 85 Nissan 4x4 2.4,but it's carburated.I f you wan't to get a 86 experts advice,join this site,It's free,I am a member,has forums and you can buy and sell parts,free advice,interact with other Nissan truck owners,put your pictures up and see other trucks and get ideas,here's my Nissan.

Mar 02, 2013 | 1986 Nissan Pickup 4WD 1986

1 Answer

1994 Toyota pickup / 4WD / 4 cyl. Replaced heater core. Checked heater control valve- working correctly. Filled system from upper hoses at firewall to fill heater core. Connected hoses. replaced...


you could try running engine and open top heater core hose highest point should bleed it fully, failing that look at manual should tell how much water is in system

Feb 01, 2011 | 1994 Toyota Pickup

1 Answer

I have a 2wd 95 Nissan XE 4 cyl pickup and i am having problems starting the truck. when i turn the key it ticks then slowly turns over. sometimes this ticks only happen briefly other times in will take...


You need to pull out the starter and take it to your local auto parts store for testing - I suspect your armature in your starter is worn and causing your issue. This is a replaceable part and, depending on your skill level, you may be able to do it yourself. If your starter is not too expensive it may be feasible to just replace it as your brushes in the starter are probably worn too.

Nov 24, 2010 | 1995 Nissan Pickup

1 Answer

I have a 94 Ford Explorer 4dr 2wd w/ac. When I


Remove the blower motor located under the hood on the passenger side in the evap. case. HEld in by 3 8mm screws. The fan blade may have broken .

Nov 15, 2009 | 1994 Ford Explorer Limited

1 Answer

Transmission dipstick 94 nissan hard body 4 cyl i cant find it


there is no dipstick for transmission there is a bolt on the side of the gear box where to fill oil,its here you find the level of the oil,it is check here

Aug 16, 2009 | 1994 Nissan Pickup

1 Answer

1994 Nissan XE Pickup Fuel Pump Noise???


here is how you can tell it is the fuel pump. turn your truck off. than have someone turn the ksy into the on position while they do that stand back at the end of the truck where the gas tank is located. when they key is switched to the one position thhe fuel pump should kick on and make a humming noise. if it is the same noise you hear when your ideling than that is you culprit.... my suburban does the same thing.

Aug 01, 2008 | 1994 Nissan Pickup

Not finding what you are looking for?
1994 Nissan Pickup Logo

Related Topics:

154 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

70387 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

705 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...