Question about 1997 Honda Accord

2 Answers

Cant get the the injecters to work

I replased the head gasket on my 97 Honda Accord and after I put it on the car did not start and i checked around and realized that there was no current going to the plug on the injecters what causes that problem? I replazed the main relay under the dash bord because gen Itry to start it it gives out a clicking noise and the check engine light flikers alot

Posted by on

  • edikarryo Dec 22, 2008

    thanx for the help,

    ive already checked them what else can cause that problem?

  • edikarryo Dec 22, 2008

    thanx for helping i did have a loose ground wire



2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 585 Answers

You may have left a connector unplugged. You may have pinched a wire or harness under something. If everything in the car flashes when you try to start there is a problem with the battery connection(s).

Posted on Dec 22, 2008

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 5 achievements.


    An expert whose answer got voted for 20 times.


    An expert who has answered 20 questions.

  • Expert
  • 75 Answers

I tink that you have lost the ground contact somwhere ck all your cables and wires for proper connection and all the plugs too

Posted on Dec 22, 2008


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

1990 accord won't start, engine turns over and put in new spark plugs and wires. What else should I check/do?

Check for gas and spark to the engine. I'm thinking a '90 accord might be multi-point injection, although they transitioned about then from throttle body injection to multi-port injection. Either way, you need to check if the injectors are firing and putting gas into the engine. Does the fuel pump work? Is there pressure in the gas feed line?
Usually, a no start is because the engine has lost either fuel or spark. You need to check for both. Use a spark tester from parts store- a cheap and easy test for spark.

Feb 18, 2017 | 1990 Honda Accord

1 Answer

Smoking and hesitation when i start it up

check the coolant level. if it is low or empty you have a blown head gasket. On acceleration the leak in the head gasket is causing the rough running and stalling

Oct 12, 2013 | 1996 Honda Accord

1 Answer

99 accord replaced head gasket overheated wont start put key dash lights up does nothing will not release shift dash shows on drive hook up computer starts right up sHows park unhook computer shuts down...

you need comma's bad. (old post., doing 0 answers for 60 days)
are you saying it overheated after a new head gasket? i sure can not tell. my guess, not, my guess is this.
car overheated (first)
compression flat on x cylinders.
so i check head for warp, not warped (.002' max) so tried a new head gasket.
hook up computer , (scan tool, you mean the OBD2 scan tool?)
sure , the immobilizer.
the car engine brain, is called PCM, not connected kills all spark and fueling. in fact all that is PCM , created, all the time.
so what computer? some cars have 12 on board,

the service manual is there. see ISC?

the shifter has a park lockout and has a bypass. feature, see the
operators guide for bypass steps.
these the lost operators guide here, for how the IMMO works.

my guess, is you figured all IMMO issues, and reset it and configured it.

Oct 11, 2013 | 1999 Honda Accord

1 Answer

Hi Ford Galaxy 52 plate leaking water can not find leak i top the water up every two days any info would a great help

if you cant find the leak its normally the head gasket. try topping it up and starting it from cold, looking around for leaks as it wont evaporate while cold.

Mar 18, 2011 | 1995 Honda Accord

1 Answer

Oil leaking from above oil pan and filter next to a bolt that fits an allen wrench.

i own a 97 honda accord make sure right oil filter clean all around oil pan clean around oil filter if you got it up on floor jacks start it up look for leaks and check valve cover gasket i don,t think it would be head gasket.

Jan 29, 2011 | 1997 Honda Accord

2 Answers

1999 accord v6 starts and idles fine but runs hot what could be some possibilities?

check the thermostat first always might be stuck if thats it simple fix

Oct 08, 2009 | 1999 Honda Accord

1 Answer

1995 honda accord.....engine will turn over but wont start. My daughter had oneof her friends working on it. It was overheating, put in a new thermostat. It was leaking around the water outlet seal, it was...

hi, the first thing i would do is get the head gasket checked this will involve using a sniff test this fits into the water filler bottle and test if their are any gasses getting into the water system as when it over heated this can usually cause damage to the head gasket.
doing this is a big job and will require specialist tools but get it checked out first before you spend more money.
Let me know how you get on or if you need further assistance ok

Aug 10, 2009 | 1995 Honda Accord

1 Answer

2004 honda accord

you blew the head gasket...

Jul 06, 2009 | 2004 Honda Accord

1 Answer

Determining if head gasket is blown on a 1994 honda accord Ex w VTec

White smoke out of the exhaust is one indication that the head gasket is blown. Another is to start the car and check the oil on the dipstick. If it's frothy or looks like a milkshake, this is another indication of a blown head gasket. The milky appearance indicates that coolant is in your engine, caused by a bad head gasket. If none of these symptoms occur, then the problem lies elsewhere. Hope this answers your question and feel free to post back with any other concerns or questions. Thank you.

May 23, 2009 | 1994 Honda Accord

1 Answer

Sputtering and hot

if it's running hot and really gutless it could be your timing..or a blown head gasket check your oil.make sure that it is not a milky color.if it is you probly have a blown head gasket..

Dec 03, 2008 | 2004 Honda Accord

Not finding what you are looking for?
1997 Honda Accord Logo

110 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts


Level 3 Expert

82322 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22382 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8841 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides