Question about 1996 Toyota 4Runner
I found out that it is a dual purpose bulb but now I need to replace the burned out one. help
I can't give exact details, b/c you did not say which one. The bulbs pull out from the back of the whole light assembly. I think the Toyota has little wire clips that hold the assembly in, if so, the clip toward the center, and the whole thing pulls out. The MAIN thing to remember is DO NOT TOUCH the bulbs! If you do, they will last less than a minute. The oils in your touch will heat up and break the bulb.
Posted on Dec 21, 2008
What do you mean double purpose? replace your head lamp bulb with exactly the same type of oem bulb you took out.
Posted on Dec 21, 2008
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Tips for a great answer:
Jan 20, 2018 | Toyota Cars & Trucks
Sep 27, 2015 | Toyota Cars & Trucks
[Information] For a 2002 Toyota Camry, the Daytime
Running Lights (DRL) operate utilizing the High Beams (inner Lamps closer to
the center of the vehicle front) at a reduced power.
[The troubleshooting process:] Review the Owner's Manual and ensure the test
configuration matches the following criteria:
1. According to the 2002 Toyota Camry Owner's Manual (Check your Owners Manual):
"The DRL system will make your headlights come on at a reduced brightness when:
The light switch s in the "DRL" position.
The ignition is on with the engine running.
The headlight switch is off.
The parking brake is released."
2. Set the Test Conditions according to Step 1 above.
3. Check the headlight bulbs to ensure they are not
burned out. If one burns out, there is a fair chance that the other would have burned
out at the same time. Replace as necessary.
In this case, if the high beams operate, the DRLs should also operate.
4. Test the system, ensuring the step 1 conditions are set. (Engine running, Multi-function Switch on Turn Signals in "DRL" position, headlight switch off (repeating what the manual says -- it should be obvious that in the "DRL" position, the headlight switch should be off / do not have the switch positioned to "High Beam"), and the Parking Brake "off").
5. If DRL lights do not work, check the engine compartment Fuse and Relay Box. there is a 5 Amp DRL fuse -- replace it with the spare. Test (step 4).
6. If it does not work, swap around or replace relays -- there are three (3). Any one of them could be bad (stuck or burned out). Test (step 4).
7. Other less likely possible issues could be that the Multi-function Switch is broken or a connection / wire is broken. [Beyond the scope of this process.]
My problem was that the test configuration did not have
the engine running and parking brake off - Step 1. Problem solved with much
thought, repetitive tests on the vehicle and going back to the basics -- what
does the Owner's Manual say and where are the applicable fuses and relays
Dec 30, 2011 | 2002 Toyota Camry
Feb 25, 2011 | 1996 Toyota Land Cruiser
Sep 20, 2009 | 1997 Toyota RAV4
May 13, 2009 | 1996 Toyota 4Runner
Nov 03, 2008 | 1994 Toyota 4Runner
211 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: