Question about 2000 Dodge Intrepid

1 Answer

2000 dodge intrepid 3.2 engine light on yesterday, code PO432, should I replace the upper oxygen sensor?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 512 Answers

This is the code for catalytic convertor efficiency. if you decide to change the 02 sensor change both of the sensors for the left head...there is a good chance the convertor is going bad also depending on the miles

Posted on Dec 21, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My Dodge Stratus (1998 4 cyl) check Engine light is on. The error code says oxygen sensors were bad. Both oxygen sensors have been replaced. After resetting the check Eng light. The oxygen sensor


the upper 02 sensor is for air fuel mix while the secondary 02 sensor is for the operation and status of the catalitic converter are you sure the catalitic converter is not plugged. Could be if you have had a loss of power

Sep 16, 2014 | 1998 Dodge Stratus

1 Answer

My dodge intrepid cel comes on and off every 700 miles or so i took it to auto zone and the code reads po432 the guy at auto zone said i should be able to get a non fouler and put it on the o2 sensor


First take no advice from the kids at Autozone, they have no training. as for the code here are the most common reasons for the code you have.
Possible causes - Warm Up Three Way Catalytic converter deterioration or malfunction
- Exhaust system leaks
- Loose front or rear HO2Ss
- Faulty front heater O2 sensor
- O2 sensors harness is open or shorted
- O2 sensors poor electrical connection

Mar 12, 2014 | Dodge Cars & Trucks

1 Answer

Engine light is on. I think it is the oxygen sensor on a 2000 Dodge Intrepid. How do I check or change it - I am mechanically inclined.


you can buy an inexpensive code scanner at any pepboys or autozone and most parts stores scan your computer then go from there bank 1 is the side of engine where the number 1 spark plug is located they usually go anywhere from 80-120 thousand miles

Aug 12, 2010 | 2000 Dodge Intrepid

1 Answer

I'm looking for the engine codes for a dodge intrepid codes are 1391 - 0134 - 1684.... I am trying to replace the oxygen sensors...how do you know which ones to replace?


1391 is a timing code cam or crank sensor
0134 bank 1 sensor 1 usually left front but double check
1684 doesn't match anything i know

Jan 30, 2010 | 1999 Dodge Intrepid

2 Answers

Where is the camshaft position sensor located on a 2000 Dodge Intrepid?


If it is a 3.5 it is located on the front of the engine on the drivers side under the plenum.

Oct 23, 2009 | 2000 Dodge Intrepid

1 Answer

Location of oxygen sensor


There is only 4 sensors on a 2000 dodge intrepid and the bank 2 sensor 2 is the sensor located on the right (passenger) side and the one located after the catalytic converter (the one close to the firewall).

Apr 08, 2009 | 2000 Dodge Intrepid

2 Answers

96 intrepid 3.5 litre, wont start


did you check for spark at the plugs. becuase oxygen sensor wont prevent the car from starting. let me know about the spark.

Feb 13, 2009 | 1996 Dodge Intrepid

1 Answer

2000 dodge intrepid 3.2 engine light on yesterday, code reads PO4


before you spend that kind of money you should plug it in and scan for trouble codes could be 1 0f 20 things???

Dec 21, 2008 | 2000 Dodge Intrepid

1 Answer

Engine diagnostic codes


I don't have a dodge ram but the codes for the dodge vehicles where pretty much the same. For my intrepid the codes read for the following numbers

12 - Problem with battery connection (This usually happens if you disconnect the battery)
21 - Problem with the oxygen sensor circuit
52 - Oxygen Sensor signal input indicates rich mixture during engine operation.

It sounds like you may need to change an oxygen sensor. Hope this helps.

Aug 15, 2008 | 1995 Dodge Intrepid

1 Answer

Check engine codes 95 dodge intrepid


Code 12 is: Direct battery input to PCM was disconnected within the last 50 key-on cycles.

Code 21 is: Neither rich nor lean condition detected from the oxygen sensor input or oxygen sensor input voltage maintained above the normal operating range.

May 22, 2008 | 1995 Dodge Intrepid

Not finding what you are looking for?
2000 Dodge Intrepid Logo

Related Topics:

562 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

60667 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21936 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...